forgot to commit these improvements to the bootbox charging info, since quite a while
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7387 a1c6a512-1295-4272-9138-f99709370657
diff --git a/flash/bootbox/main.c b/flash/bootbox/main.c
index d4e3260..ef215c0 100644
--- a/flash/bootbox/main.c
+++ b/flash/bootbox/main.c
@@ -66,43 +66,72 @@
}
#ifdef HAVE_CHARGING
-int charging_screen(void)
+/*
+bool backlight_get_on_when_charging(void)
+{
+ return false;
+}
+*/
+void charging_screen(void)
{
unsigned int button;
- int rc = 0;
+ const char* msg;
ide_power_enable(false); /* power down the disk, else would be spinning */
lcd_clear_display();
- lcd_puts(0, 0, "charging...");
-#ifdef HAVE_LCD_BITMAP
- lcd_update();
-#endif
do
{
- button = button_get_w_tmo(HZ/2);
- if (button == BUTTON_ON)
- rc = 2;
- else if (usb_detect())
- rc = 3;
- else if (!charger_inserted())
- rc = 1;
- } while (!rc);
+#ifdef HAVE_CHARGE_CTRL
+ if (charge_state == 1)
+ msg = "charging";
+ else if (charge_state == 2)
+ msg = "topoff charge";
+ else if (charge_state == 3)
+ msg = "trickle charge";
+ else
+ msg = "not charging";
- return rc;
+#else
+ msg = "charging";
+#endif
+ lcd_puts(0, 0, msg);
+ {
+ char buf[32];
+ int battery_voltage;
+ int batt_int, batt_frac;
+ battery_voltage = (adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR) / 10000;
+ batt_int = battery_voltage / 100;
+ batt_frac = battery_voltage % 100;
+
+ snprintf(buf, sizeof(buf), "%d.%02dV %d%%",
+ batt_int, batt_frac, battery_level());
+ lcd_puts(0, 1, buf);
+ }
+
+#ifdef HAVE_LCD_BITMAP
+ lcd_update();
+#endif
+
+ button = button_get_w_tmo(HZ/2);
+#ifdef BUTTON_ON
+ if (button == (BUTTON_ON | BUTTON_REL))
+#else
+ if (button == (BUTTON_RIGHT | BUTTON_REL))
+#endif
+ break; /* start */
+ else
+ {
+ if (usb_detect())
+ break;
+ else if (!charger_inserted())
+ power_off(); /* charger removed: power down */
+ }
+ } while (1);
}
#endif /* HAVE_CHARGING */
-#ifdef HAVE_MMC
-int mmc_remove_request(void)
-{
- /* A dummy function here, we won't access the card
- before entering USB mode */
- return 0;
-}
-#endif /* HAVE_MMC */
-
/* prompt user to plug USB and fix a problem */
void prompt_usb(const char* msg1, const char* msg2)
{
@@ -150,10 +179,7 @@
#endif
)
{
- rc = charging_screen(); /* display a "charging" screen */
- if (rc == 1) /* charger removed */
- power_off();
- /* "On" pressed or USB connected: proceed */
+ charging_screen(); /* display a "charging" screen */
show_logo(); /* again, to provide better visual feedback */
}
#endif