blob: cbc4ea98e3294ba9b19f2f8afd5c66d0108d0415 [file] [log] [blame]
/*
* This config file is for the Cowon iAudio D2
*/
#define TARGET_TREE /* this target is using the target tree system */
/* For Rolo and boot loader */
#define MODEL_NUMBER 24
/* Produce a dual-boot bootloader.bin for mktccboot */
#define TCCBOOT
/* define this if you have recording possibility */
//#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
//#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_SPDIF)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you can flip your LCD */
/* #define HAVE_LCD_FLIP */
/* define this if you can invert the colours on your LCD */
/* #define HAVE_LCD_INVERT */
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
//#define HAVE_TAGCACHE
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* Some (2Gb?) D2s seem to be FAT16 formatted */
#define HAVE_FAT16SUPPORT
/* LCD dimensions */
#define LCD_WIDTH 320
#define LCD_HEIGHT 240
#define LCD_DEPTH 16
#define LCD_PIXELFORMAT 565
/* define this if you have LCD enable function */
#define HAVE_LCD_ENABLE
/* define this to indicate your device's keypad */
#define CONFIG_KEYPAD COWOND2_PAD
#define HAVE_TOUCHPAD
#define HAVE_BUTTON_DATA
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_PCF50606
/* define this if you have RTC RAM available for settings */
//#define HAVE_RTC_RAM
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* Reduce Tremor's ICODE usage */
#define ICODE_ATTR_TREMOR_NOT_MDCT
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x80000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
#define AB_REPEAT_ENABLE 1
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* The D2 uses a WM8985 codec */
#define HAVE_WM8985
/* Use WM8985 EQ1 & EQ5 as hardware tone controls */
/* #define HAVE_SW_TONE_CONTROLS */
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
/* Enable LCD brightness control */
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 14
#define DEFAULT_BRIGHTNESS_SETTING 8
#define CONFIG_I2C I2C_TCC780X
#define BATTERY_CAPACITY_DEFAULT 1600 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 50 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE
#ifndef SIMULATOR
/* Define this if you have a TCC7801 */
#define CONFIG_CPU TCC7801
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Define this to the CPU frequency */
#define CPU_FREQ 48000000
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* Software controlled LED */
#define CONFIG_LED LED_VIRTUAL
#define CONFIG_LCD LCD_COWOND2
#define BOOTFILE_EXT "iaudio"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#endif /* SIMULATOR */