| sansapatcher |
| ------------ |
| |
| To compile sansapatcher, you need both the C200 and E200 Rockbox |
| bootloaders. The latest bootloaders can always be found here: |
| |
| http://download.rockbox.org/bootloader/sandisk-sansa/e200/PP5022.mi4 |
| http://download.rockbox.org/bootloader/sandisk-sansa/c200/firmware.mi4 |
| |
| Place both these files in the sansapatcher source directory, and type "make". |
| |
| |
| Building your own bootloaders |
| ----------------------------- |
| |
| If you would like to compile the bootloaders yourself, they are the output of |
| running the "Bootloader" build for the E200 and C200 targets. |
| |
| NOTE: Unless you know what you are doing, it is recommended that you |
| use the official pre-built binary bootloaders linked to above. |
| Bootloaders compiled from current Rockbox SVN are untested and |
| may contain bugs preventing you from starting the device (or |
| worse...). |
| |
| In the Rockbox source directory, do: |
| |
| mkdir build-e200-bootloader |
| cd build-e200-bootloader |
| ../tools/configure |
| [Select E200, then B for bootloader] |
| make |
| |
| This will create PP5022.mi4 which you should copy to the sansapatcher |
| build directory. |
| |
| A similar process for the C200 will create firmware.mi4. |