| /*************************************************************************** |
| * __________ __ ___. |
| * Open \______ \ ____ ____ | | _\_ |__ _______ ___ |
| * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / |
| * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < |
| * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ |
| * \/ \/ \/ \/ \/ |
| * $Id$ |
| * |
| * Copyright (C) 2007 by Jens Arnold |
| * Heavily based on lcd-as-memframe.c by Michael Sevakis |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ****************************************************************************/ |
| |
| #include "config.h" |
| #include "cpu.h" |
| |
| /**************************************************************************** |
| * void lcd_write_yuv_420_lines(unsigned char const * const src[3], |
| * int width, |
| * int stride); |
| * |
| * |R| |1.000000 -0.000001 1.402000| |Y'| |
| * |G| = |1.000000 -0.334136 -0.714136| |Pb| |
| * |B| |1.000000 1.772000 0.000000| |Pr| |
| * Scaled, normalized, rounded and tweaked to yield RGB 565: |
| * |R| |74 0 101| |Y' - 16| >> 9 |
| * |G| = |74 -24 -51| |Cb - 128| >> 8 |
| * |B| |74 128 0| |Cr - 128| >> 9 |
| * |
| * Write four RGB565 pixels in the following order on each loop: |
| * 1 3 + > down |
| * 2 4 \/ left |
| */ |
| .section .icode, "ax", %progbits |
| .align 2 |
| .global lcd_write_yuv420_lines |
| .type lcd_write_yuv420_lines, %function |
| lcd_write_yuv420_lines: |
| @ r0 = yuv_src |
| @ r1 = width |
| @ r2 = stride |
| stmfd sp!, { r4-r12 } @ save non-scratch |
| ldmia r0, { r4, r5, r6 } @ r4 = yuv_src[0] = Y'_p |
| @ r5 = yuv_src[1] = Cb_p |
| @ r6 = yuv_src[2] = Cr_p |
| @ r0 = scratch |
| sub r2, r2, #1 @ |
| mov r3, #0x70000000 @ |
| orr r3, r3, #0x3000 @ r3 = LCD1_BASE |
| 10: @ loop line @ |
| ldrb r7, [r4], #1 @ r7 = *Y'_p++; |
| ldrb r8, [r5], #1 @ r8 = *Cb_p++; |
| ldrb r9, [r6], #1 @ r9 = *Cr_p++; |
| @ |
| sub r7, r7, #16 @ r7 = Y = (Y' - 16)*74 |
| add r12, r7, r7, asl #2 @ actually (Y' - 16)*37 and shift right |
| add r7, r12, r7, asl #5 @ by one less when adding - same for all |
| @ |
| sub r8, r8, #128 @ Cb -= 128 |
| sub r9, r9, #128 @ Cr -= 128 |
| @ |
| add r10, r9, r9, asl #1 @ r10 = Cr*51 + Cb*24 |
| add r10, r10, r10, asl #4 @ |
| add r10, r10, r8, asl #3 @ |
| add r10, r10, r8, asl #4 @ |
| @ |
| add r11, r9, r9, asl #2 @ r9 = Cr*101 |
| add r11, r11, r9, asl #5 @ |
| add r9, r11, r9, asl #6 @ |
| @ |
| add r8, r8, #2 @ r8 = bu = (Cb*128 + 128) >> 8 |
| mov r8, r8, asr #2 @ |
| add r9, r9, #256 @ r9 = rv = (r9 + 256) >> 9 |
| mov r9, r9, asr #9 @ |
| rsb r10, r10, #128 @ r10 = guv = (-r10 + 128) >> 8 |
| mov r10, r10, asr #8 @ |
| @ compute R, G, and B |
| add r0, r8, r7, asr #8 @ r0 = b = (Y >> 9) + bu |
| add r11, r9, r7, asr #8 @ r11 = r = (Y >> 9) + rv |
| add r7, r10, r7, asr #7 @ r7 = g = (Y >> 8) + guv |
| @ |
| orr r12, r0, r11 @ check if clamping is needed... |
| orr r12, r12, r7, asr #1 @ ...at all |
| cmp r12, #31 @ |
| bls 15f @ no clamp @ |
| cmp r0, #31 @ clamp b |
| mvnhi r0, r0, asr #31 @ |
| andhi r0, r0, #31 @ |
| cmp r11, #31 @ clamp r |
| mvnhi r11, r11, asr #31 @ |
| andhi r11, r11, #31 @ |
| cmp r7, #63 @ clamp g |
| mvnhi r7, r7, asr #31 @ |
| andhi r7, r7, #63 @ |
| 15: @ no clamp @ |
| @ |
| ldrb r12, [r4, r2] @ r12 = Y' = *(Y'_p + stride) |
| @ |
| mov r11, r11, lsl #3 @ |
| orr r11, r11, r7, lsr #3 @ r11 = (r << 3) | (g >> 3) |
| orr r0, r0, r7, lsl #5 @ r0 = (g << 5) | b |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r11, [r3, #0x10] @ send MSB |
| 1: @busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r0, [r3, #0x10] @ send LSB |
| @ |
| sub r7, r12, #16 @ r7 = Y = (Y' - 16)*74 |
| add r12, r7, r7, asl #2 @ |
| add r7, r12, r7, asl #5 @ |
| @ compute R, G, and B |
| add r0, r8, r7, asr #8 @ r0 = b = (Y >> 9) + bu |
| add r11, r9, r7, asr #8 @ r11 = r = (Y >> 9) + rv |
| add r7, r10, r7, asr #7 @ r7 = g = (Y >> 8) + guv |
| @ |
| orr r12, r0, r11 @ check if clamping is needed... |
| orr r12, r12, r7, asr #1 @ ...at all |
| cmp r12, #31 @ |
| bls 15f @ no clamp @ |
| cmp r0, #31 @ clamp b |
| mvnhi r0, r0, asr #31 @ |
| andhi r0, r0, #31 @ |
| cmp r11, #31 @ clamp r |
| mvnhi r11, r11, asr #31 @ |
| andhi r11, r11, #31 @ |
| cmp r7, #63 @ clamp g |
| mvnhi r7, r7, asr #31 @ |
| andhi r7, r7, #63 @ |
| 15: @ no clamp @ |
| @ |
| ldrb r12, [r4], #1 @ r12 = Y' = *(Y'_p++) |
| @ |
| mov r11, r11, lsl #3 @ |
| orr r11, r11, r7, lsr #3 @ r11 = (r << 3) | (g >> 3) |
| orr r0, r0, r7, lsl #5 @ r0 = (g << 5) | b |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r11, [r3, #0x10] @ send MSB |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r0, [r3, #0x10] @ send LSB |
| @ |
| sub r7, r12, #16 @ r7 = Y = (Y' - 16)*74 |
| add r12, r7, r7, asl #2 @ |
| add r7, r12, r7, asl #5 @ |
| @ compute R, G, and B |
| add r0, r8, r7, asr #8 @ r0 = b = (Y >> 9) + bu |
| add r11, r9, r7, asr #8 @ r11 = r = (Y >> 9) + rv |
| add r7, r10, r7, asr #7 @ r7 = g = (Y >> 8) + guv |
| @ |
| orr r12, r0, r11 @ check if clamping is needed... |
| orr r12, r12, r7, asr #1 @ ...at all |
| cmp r12, #31 @ |
| bls 15f @ no clamp @ |
| cmp r0, #31 @ clamp b |
| mvnhi r0, r0, asr #31 @ |
| andhi r0, r0, #31 @ |
| cmp r11, #31 @ clamp r |
| mvnhi r11, r11, asr #31 @ |
| andhi r11, r11, #31 @ |
| cmp r7, #63 @ clamp g |
| mvnhi r7, r7, asr #31 @ |
| andhi r7, r7, #63 @ |
| 15: @ no clamp @ |
| @ |
| ldrb r12, [r4, r2] @ r12 = Y' = *(Y'_p + stride) |
| @ |
| @ |
| mov r11, r11, lsl #3 @ |
| orr r11, r11, r7, lsr #3 @ r11 = (r << 3) | (g >> 3) |
| orr r0, r0, r7, lsl #5 @ r0 = (g << 5) | b |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r11, [r3, #0x10] @ send MSB |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r0, [r3, #0x10] @ send LSB |
| @ |
| sub r7, r12, #16 @ r7 = Y = (Y' - 16)*74 |
| add r12, r7, r7, asl #2 @ |
| add r7, r12, r7, asl #5 @ |
| @ compute R, G, and B |
| add r0, r8, r7, asr #8 @ r0 = b = (Y >> 9) + bu |
| add r11, r9, r7, asr #8 @ r11 = r = (Y >> 9) + rv |
| add r7, r10, r7, asr #7 @ r7 = g = (Y >> 8) + guv |
| @ |
| orr r12, r0, r11 @ check if clamping is needed... |
| orr r12, r12, r7, asr #1 @ ...at all |
| cmp r12, #31 @ |
| bls 15f @ no clamp @ |
| cmp r0, #31 @ clamp b |
| mvnhi r0, r0, asr #31 @ |
| andhi r0, r0, #31 @ |
| cmp r11, #31 @ clamp r |
| mvnhi r11, r11, asr #31 @ |
| andhi r11, r11, #31 @ |
| cmp r7, #63 @ clamp g |
| mvnhi r7, r7, asr #31 @ |
| andhi r7, r7, #63 @ |
| 15: @ no clamp @ |
| @ |
| mov r11, r11, lsl #3 @ |
| orr r11, r11, r7, lsr #3 @ r11 = (r << 3) | (g >> 3) |
| orr r0, r0, r7, lsl #5 @ r0 = (g << 5) | b |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r11, [r3, #0x10] @ send MSB |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r0, [r3, #0x10] @ send LSB |
| @ |
| subs r1, r1, #2 @ subtract block from width |
| bgt 10b @ loop line @ |
| @ |
| ldmfd sp!, { r4-r12 } @ restore registers and return |
| bx lr @ |
| .ltorg @ dump constant pool |
| .size lcd_write_yuv420_lines, .-lcd_write_yuv420_lines |
| |
| /**************************************************************************** |
| * void lcd_write_yuv_420_lines_odither(unsigned char const * const src[3], |
| * int width, |
| * int stride, |
| * int x_screen, |
| * int y_screen); |
| * |
| * |R| |1.000000 -0.000001 1.402000| |Y'| |
| * |G| = |1.000000 -0.334136 -0.714136| |Pb| |
| * |B| |1.000000 1.772000 0.000000| |Pr| |
| * Red scaled at twice g & b but at same precision to place it in correct |
| * bit position after multiply and leave instruction count lower. |
| * |R| |258 0 408| |Y' - 16| |
| * |G| = |149 -49 -104| |Cb - 128| |
| * |B| |149 258 0| |Cr - 128| |
| * |
| * Write four RGB565 pixels in the following order on each loop: |
| * 1 3 + > down |
| * 2 4 \/ left |
| * |
| * Kernel pattern (raw|rotated|use order): |
| * 5 3 4 2 2 6 3 7 row0 row2 > down |
| * 1 7 0 6 | 4 0 5 1 | 2 4 6 0 3 5 7 1 col0 left |
| * 4 2 5 3 | 3 7 2 6 | 3 5 7 1 2 4 6 0 col2 \/ |
| * 0 6 1 7 5 1 4 0 |
| */ |
| .section .icode, "ax", %progbits |
| .align 2 |
| .global lcd_write_yuv420_lines_odither |
| .type lcd_write_yuv420_lines_odither, %function |
| lcd_write_yuv420_lines_odither: |
| @ r0 = yuv_src |
| @ r1 = width |
| @ r2 = stride |
| @ r3 = x_screen |
| @ [sp] = y_screen |
| stmfd sp!, { r4-r12, lr } @ save non-scratch |
| ldmia r0, { r4, r5, r6 } @ r4 = yuv_src[0] = Y'_p |
| @ r5 = yuv_src[1] = Cb_p |
| @ r6 = yuv_src[2] = Cr_p |
| @ |
| sub r2, r2, #1 @ |
| ldr r14, [sp, #40] @ Line up pattern and kernel quadrant |
| eor r14, r14, r3 @ |
| and r14, r14, #0x2 @ |
| mov r14, r14, lsl #6 @ 0x00 or 0x80 |
| mov r3, #0x70000000 @ |
| orr r3, r3, #0x3000 @ r3 = LCD1_BASE |
| 10: @ loop line @ |
| @ |
| ldrb r7, [r4], #1 @ r7 = *Y'_p++; |
| ldrb r8, [r5], #1 @ r8 = *Cb_p++; |
| ldrb r9, [r6], #1 @ r9 = *Cr_p++; |
| @ |
| eor r14, r14, #0x80 @ flip pattern quadrant |
| @ |
| sub r7, r7, #16 @ r7 = Y = (Y' - 16)*149 |
| add r12, r7, r7, asl #2 @ |
| add r12, r12, r12, asl #4 @ |
| add r7, r12, r7, asl #6 @ |
| @ |
| sub r8, r8, #128 @ Cb -= 128 |
| sub r9, r9, #128 @ Cr -= 128 |
| @ |
| add r10, r8, r8, asl #4 @ r10 = guv = Cr*104 + Cb*49 |
| add r10, r10, r8, asl #5 @ |
| add r10, r10, r9, asl #3 @ |
| add r10, r10, r9, asl #5 @ |
| add r10, r10, r9, asl #6 @ |
| @ |
| mov r8, r8, asl #1 @ r8 = bu = Cb*258 |
| add r8, r8, r8, asl #7 @ |
| @ |
| add r9, r9, r9, asl #1 @ r9 = rv = Cr*408 |
| add r9, r9, r9, asl #4 @ |
| mov r9, r9, asl #3 @ |
| @ |
| @ compute R, G, and B |
| add r0, r8, r7 @ r0 = b' = Y + bu |
| add r11, r9, r7, asl #1 @ r11 = r' = Y*2 + rv |
| rsb r7, r10, r7 @ r7 = g' = Y + guv |
| @ |
| @ r8 = bu, r9 = rv, r10 = guv |
| @ |
| sub r12, r0, r0, lsr #5 @ r0 = 31/32*b + b/256 |
| add r0, r12, r0, lsr #8 @ |
| @ |
| sub r12, r11, r11, lsr #5 @ r11 = 31/32*r + r/256 |
| add r11, r12, r11, lsr #8 @ |
| @ |
| sub r12, r7, r7, lsr #6 @ r7 = 63/64*g + g/256 |
| add r7, r12, r7, lsr #8 @ |
| @ |
| add r12, r14, #0x100 @ |
| @ |
| add r0, r0, r12 @ b = r0 + delta |
| add r11, r11, r12, lsl #1 @ r = r11 + delta*2 |
| add r7, r7, r12, lsr #1 @ g = r7 + delta/2 |
| @ |
| orr r12, r0, r11, asr #1 @ check if clamping is needed... |
| orr r12, r12, r7 @ ...at all |
| movs r12, r12, asr #15 @ |
| beq 15f @ no clamp @ |
| movs r12, r0, asr #15 @ clamp b |
| mvnne r0, r12, lsr #15 @ |
| andne r0, r0, #0x7c00 @ mask b only if clamped |
| movs r12, r11, asr #16 @ clamp r |
| mvnne r11, r12, lsr #16 @ |
| movs r12, r7, asr #15 @ clamp g |
| mvnne r7, r12, lsr #15 @ |
| 15: @ no clamp @ |
| @ |
| ldrb r12, [r4, r2] @ r12 = Y' = *(Y'_p + stride) |
| @ |
| |
| and r11, r11, #0xf800 @ pack pixel |
| mov r11, r11, lsr #8 |
| and r7, r7, #0x7e00 |
| orr r11, r11, r7, lsr #12 |
| mov r7, r7, lsr#4 |
| orr r0, r7, r0, lsr #10 |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r11, [r3, #0x10] @ send MSB |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r0, [r3, #0x10] @ send LSB |
| @ |
| sub r7, r12, #16 @ r7 = Y = (Y' - 16)*149 |
| add r12, r7, r7, asl #2 @ |
| add r12, r12, r12, asl #4 @ |
| add r7, r12, r7, asl #6 @ |
| @ compute R, G, and B |
| add r0, r8, r7 @ r0 = b' = Y + bu |
| add r11, r9, r7, asl #1 @ r11 = r' = Y*2 + rv |
| rsb r7, r10, r7 @ r7 = g' = Y + guv |
| @ |
| sub r12, r0, r0, lsr #5 @ r0 = 31/32*b' + b'/256 |
| add r0, r12, r0, lsr #8 @ |
| @ |
| sub r12, r11, r11, lsr #5 @ r11 = 31/32*r' + r'/256 |
| add r11, r12, r11, lsr #8 @ |
| @ |
| sub r12, r7, r7, lsr #6 @ r7 = 63/64*g' + g'/256 |
| add r7, r12, r7, lsr #8 @ |
| @ |
| add r12, r14, #0x200 @ |
| @ |
| add r0, r0, r12 @ b = r0 + delta |
| add r11, r11, r12, lsl #1 @ r = r11 + delta*2 |
| add r7, r7, r12, lsr #1 @ g = r7 + delta/2 |
| @ |
| orr r12, r0, r11, asr #1 @ check if clamping is needed... |
| orr r12, r12, r7 @ ...at all |
| movs r12, r12, asr #15 @ |
| beq 15f @ no clamp @ |
| movs r12, r0, asr #15 @ clamp b |
| mvnne r0, r12, lsr #15 @ |
| andne r0, r0, #0x7c00 @ mask b only if clamped |
| movs r12, r11, asr #16 @ clamp r |
| mvnne r11, r12, lsr #16 @ |
| movs r12, r7, asr #15 @ clamp g |
| mvnne r7, r12, lsr #15 @ |
| 15: @ no clamp @ |
| @ |
| ldrb r12, [r4], #1 @ r12 = Y' = *(Y'_p++) |
| |
| and r11, r11, #0xf800 @ pack pixel |
| mov r11, r11, lsr #8 |
| and r7, r7, #0x7e00 |
| orr r11, r11, r7, lsr #12 |
| mov r7, r7, lsr#4 |
| orr r0, r7, r0, lsr #10 |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r11, [r3, #0x10] @ send MSB |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r0, [r3, #0x10] @ send LSB |
| |
| sub r7, r12, #16 @ r7 = Y = (Y' - 16)*149 |
| add r12, r7, r7, asl #2 @ |
| add r12, r12, r12, asl #4 @ |
| add r7, r12, r7, asl #6 @ |
| @ compute R, G, and B |
| add r0, r8, r7 @ r0 = b' = Y + bu |
| add r11, r9, r7, asl #1 @ r11 = r' = Y*2 + rv |
| rsb r7, r10, r7 @ r7 = g' = Y + guv |
| @ |
| @ r8 = bu, r9 = rv, r10 = guv |
| @ |
| sub r12, r0, r0, lsr #5 @ r0 = 31/32*b' + b'/256 |
| add r0, r12, r0, lsr #8 @ |
| @ |
| sub r12, r11, r11, lsr #5 @ r11 = 31/32*r' + r'/256 |
| add r11, r12, r11, lsr #8 @ |
| @ |
| sub r12, r7, r7, lsr #6 @ r7 = 63/64*g' + g'/256 |
| add r7, r12, r7, lsr #8 @ |
| @ |
| add r12, r14, #0x300 @ |
| @ |
| add r0, r0, r12 @ b = r0 + delta |
| add r11, r11, r12, lsl #1 @ r = r11 + delta*2 |
| add r7, r7, r12, lsr #1 @ g = r7 + delta/2 |
| @ |
| orr r12, r0, r11, asr #1 @ check if clamping is needed... |
| orr r12, r12, r7 @ ...at all |
| movs r12, r12, asr #15 @ |
| beq 15f @ no clamp @ |
| movs r12, r0, asr #15 @ clamp b |
| mvnne r0, r12, lsr #15 @ |
| andne r0, r0, #0x7c00 @ mask b only if clamped |
| movs r12, r11, asr #16 @ clamp r |
| mvnne r11, r12, lsr #16 @ |
| movs r12, r7, asr #15 @ clamp g |
| mvnne r7, r12, lsr #15 @ |
| 15: @ no clamp @ |
| @ |
| ldrb r12, [r4, r2] @ r12 = Y' = *(Y'_p + stride) |
| |
| and r11, r11, #0xf800 @ pack pixel |
| mov r11, r11, lsr #8 |
| and r7, r7, #0x7e00 |
| orr r11, r11, r7, lsr #12 |
| mov r7, r7, lsr#4 |
| orr r0, r7, r0, lsr #10 |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r11, [r3, #0x10] @ send MSB |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r0, [r3, #0x10] @ send LSB |
| |
| sub r7, r12, #16 @ r7 = Y = (Y' - 16)*149 |
| add r12, r7, r7, asl #2 @ |
| add r12, r12, r12, asl #4 @ |
| add r7, r12, r7, asl #6 @ |
| @ compute R, G, and B |
| add r0, r8, r7 @ r0 = b' = Y + bu |
| add r11, r9, r7, asl #1 @ r11 = r' = Y*2 + rv |
| rsb r7, r10, r7 @ r7 = g' = Y + guv |
| @ |
| sub r12, r0, r0, lsr #5 @ r0 = 31/32*b + b/256 |
| add r0, r12, r0, lsr #8 @ |
| @ |
| sub r12, r11, r11, lsr #5 @ r11 = 31/32*r + r/256 |
| add r11, r12, r11, lsr #8 @ |
| @ |
| sub r12, r7, r7, lsr #6 @ r7 = 63/64*g + g/256 |
| add r7, r12, r7, lsr #8 @ |
| @ |
| @ This element is zero - use r14 @ |
| @ |
| add r0, r0, r14 @ b = r0 + delta |
| add r11, r11, r14, lsl #1 @ r = r11 + delta*2 |
| add r7, r7, r14, lsr #1 @ g = r7 + delta/2 |
| @ |
| orr r12, r0, r11, asr #1 @ check if clamping is needed... |
| orr r12, r12, r7 @ ...at all |
| movs r12, r12, asr #15 @ |
| beq 15f @ no clamp @ |
| movs r12, r0, asr #15 @ clamp b |
| mvnne r0, r12, lsr #15 @ |
| andne r0, r0, #0x7c00 @ mask b only if clamped |
| movs r12, r11, asr #16 @ clamp r |
| mvnne r11, r12, lsr #16 @ |
| movs r12, r7, asr #15 @ clamp g |
| mvnne r7, r12, lsr #15 @ |
| 15: @ no clamp @ |
| |
| and r11, r11, #0xf800 @ pack pixel |
| mov r11, r11, lsr #8 |
| and r7, r7, #0x7e00 |
| orr r11, r11, r7, lsr #12 |
| mov r7, r7, lsr#4 |
| orr r0, r7, r0, lsr #10 |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r11, [r3, #0x10] @ send MSB |
| 1: @ busy @ |
| ldr r7, [r3] @ r7 = LCD1_BASE |
| tst r7, #LCD1_BUSY_MASK @ bridge busy? |
| bne 1b @ |
| str r0, [r3, #0x10] @ send LSB |
| |
| subs r1, r1, #2 @ subtract block from width |
| bgt 10b @ loop line @ |
| @ |
| ldmfd sp!, { r4-r12, pc } @ restore registers and return |
| .ltorg @ dump constant pool |
| .size lcd_write_yuv420_lines_odither, .-lcd_write_yuv420_lines_odither |