| /*************************************************************************** |
| * __________ __ ___. |
| * Open \______ \ ____ ____ | | _\_ |__ _______ ___ |
| * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / |
| * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < |
| * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ |
| * \/ \/ \/ \/ \/ |
| * $Id$ |
| * |
| * Copyright (C) 2007 by Karl Kurbjun |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ****************************************************************************/ |
| |
| #include "config.h" |
| #include "cpu.h" |
| #include "system.h" |
| #include "string.h" |
| #include <stdbool.h> |
| #include "button.h" |
| #include "lcd.h" |
| #include "sprintf.h" |
| #include "font.h" |
| #include "debug-target.h" |
| #include "lcd-target.h" |
| |
| bool __dbg_ports(void) |
| { |
| return false; |
| } |
| |
| #ifndef CREATIVE_ZVx |
| extern char r_buffer[5]; |
| extern int r_button; |
| #endif |
| bool __dbg_hw_info(void) |
| { |
| int line = 0, oldline; |
| int button; |
| #ifndef CREATIVE_ZVx |
| int *address=0x0; |
| #endif |
| bool done=false; |
| char buf[100]; |
| |
| lcd_setfont(FONT_SYSFIXED); |
| lcd_clear_display(); |
| |
| /* Put all the static text befor the while loop */ |
| lcd_puts(0, line++, "[Hardware info]"); |
| |
| lcd_puts(0, line++, "Clock info:"); |
| #if LCD_WIDTH > 320 |
| snprintf(buf, sizeof(buf), "IO_CLK_PLLA: 0x%04x IO_CLK_PLLB: 0x%04x IO_CLK_SEL0: 0x%04x IO_CLK_SEL1: 0x%04x", |
| IO_CLK_PLLA, IO_CLK_PLLB, IO_CLK_SEL0, IO_CLK_SEL1); lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "IO_CLK_SEL2: 0x%04x IO_CLK_DIV0: 0x%04x IO_CLK_DIV1: 0x%04x IO_CLK_DIV2: 0x%04x", |
| IO_CLK_SEL2, IO_CLK_DIV0, IO_CLK_DIV1, IO_CLK_DIV2); lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "IO_CLK_DIV3: 0x%04x IO_CLK_DIV4: 0x%04x IO_CLK_BYP : 0x%04x IO_CLK_INV : 0x%04x", |
| IO_CLK_DIV3, IO_CLK_DIV4, IO_CLK_BYP, IO_CLK_INV); lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "IO_CLK_MOD0: 0x%04x IO_CLK_MOD1: 0x%04x IO_CLK_MOD2: 0x%04x IO_CLK_LPCTL0: 0x%04x", |
| IO_CLK_MOD0, IO_CLK_MOD1, IO_CLK_MOD2, IO_CLK_LPCTL0); lcd_puts(0, line++, buf); |
| #else |
| snprintf(buf, sizeof(buf), " IO_CLK_PLLA: 0x%04x IO_CLK_PLLB: 0x%04x", IO_CLK_PLLA, IO_CLK_PLLB); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), " IO_CLK_SEL0: 0x%04x IO_CLK_SEL1: 0x%04x", IO_CLK_SEL0, IO_CLK_SEL1); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), " IO_CLK_SEL2: 0x%04x IO_CLK_DIV0: 0x%04x", IO_CLK_SEL2, IO_CLK_DIV0); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), " IO_CLK_DIV1: 0x%04x IO_CLK_DIV2: 0x%04x", IO_CLK_DIV1, IO_CLK_DIV2); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), " IO_CLK_DIV3: 0x%04x IO_CLK_DIV4: 0x%04x", IO_CLK_DIV3, IO_CLK_DIV4); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), " IO_CLK_BYP : 0x%04x IO_CLK_INV : 0x%04x", IO_CLK_BYP, IO_CLK_INV); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), " IO_CLK_MOD0: 0x%04x IO_CLK_MOD1: 0x%04x ", IO_CLK_MOD0, IO_CLK_MOD1); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), " IO_CLK_MOD2: 0x%04x IO_CLK_LPCTL0: 0x%04x ", IO_CLK_MOD2, IO_CLK_LPCTL0); |
| lcd_puts(0, line++, buf); |
| lcd_puts(0, line++, "Interrupt info:"); |
| snprintf(buf, sizeof(buf), " IO_INTC_EINT0: 0x%04x IO_INTC_EINT1: 0x%04x ", IO_INTC_EINT0, IO_INTC_EINT1); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), " IO_INTC_EINT2: 0x%04x IO_INTC_IRQ0: 0x%04x ", IO_INTC_EINT2, IO_INTC_IRQ0); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), " IO_INTC_IRQ1: 0x%04x IO_INTC_IRQ2: 0x%04x ", IO_INTC_IRQ1, IO_INTC_IRQ2); |
| lcd_puts(0, line++, buf); |
| #endif |
| |
| lcd_puts(0, line++, "Board revision:"); |
| switch (IO_BUSC_REVR) { |
| case 0x0010: |
| lcd_puts(0, line++, " DM320 Rev. A"); |
| break; |
| case 0x0011: |
| lcd_puts(0, line++, " DM320 Rev. B/C"); |
| break; |
| default: |
| lcd_puts(0, line++, " Unknown DM320 Chip ID"); |
| } |
| |
| #ifndef CREATIVE_ZVx |
| line++; |
| #endif |
| oldline=line; |
| while(!done) |
| { |
| line = oldline; |
| #ifndef CREATIVE_ZVx |
| button = button_get(false); |
| button&=~BUTTON_REPEAT; |
| if (button == BUTTON_POWER) |
| done=true; |
| if(button==BUTTON_RC_PLAY) |
| address+=0x01; |
| else if (button==BUTTON_RC_DOWN) |
| address-=0x01; |
| else if (button==BUTTON_RC_FF) |
| address+=0x800; |
| else if (button==BUTTON_RC_REW) |
| address-=0x800; |
| |
| snprintf(buf, sizeof(buf), "Buffer: 0x%02x%02x%02x%02x%02x", |
| r_buffer[0], r_buffer[1], r_buffer[2], r_buffer[3],r_buffer[4] ); lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "Button: 0x%08x, HWread: 0x%08x", |
| (unsigned int)button, r_button); lcd_puts(0, line++, buf); |
| #else |
| button = button_get(false); |
| if(button & BUTTON_POWER) |
| done = true; |
| else if(button & BUTTON_LEFT) |
| lcd_set_direct_fb(false); |
| else if(button & BUTTON_RIGHT) |
| lcd_set_direct_fb(true); |
| |
| lcd_puts(0, line++, "LCD info:"); |
| snprintf(buf, sizeof(buf), " LCD direct FB access? %s", (lcd_get_direct_fb() ? "yes" : "no")); |
| lcd_puts(0, line++, buf); |
| line++; |
| #endif |
| lcd_puts(0, line++, "[Rockbox info]"); |
| snprintf(buf, sizeof(buf), "current tick: %08x Seconds running: %08d", |
| (unsigned int)current_tick, (unsigned int)current_tick/100); lcd_puts(0, line++, buf); |
| #ifndef CREATIVE_ZVx |
| snprintf(buf, sizeof(buf), "Address: 0x%08x Data: 0x%08x", |
| (unsigned int)address, *address); lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "Address: 0x%08x Data: 0x%08x", |
| (unsigned int)(address+1), *(address+1)); lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "Address: 0x%08x Data: 0x%08x", |
| (unsigned int)(address+2), *(address+2)); lcd_puts(0, line++, buf); |
| #endif |
| |
| lcd_update(); |
| } |
| return false; |
| } |