tools/configure - rockbox - Gitiles

 #!/bin/sh
 #             __________               __   ___.
 #   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 #   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 #   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 #   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 #                     \/            \/     \/    \/            \/
 # $Id$
 #


 #
 # Begin Function Definitions
 #
 input() {
     read response
     echo $response
 }

 whichsim () {

 if [ -z "$simver" ]; then

   ##################################################################
   # Figure out win32/x11 GUI
   #
   echo ""
   echo "Build (W)in32 or  (X)11 GUI version? (X)"

   option=`input`;

   case $option in
    [Ww])
      simver="win32"
      ;;
    *)
      simver="x11"
      ;;
    esac
    echo "Selected $simver simulator"
 fi
 }


 simul () {

 sed > Makefile \
  -e "s,@ROOTDIR@,${rootdir},g" \
  -e "s,@ARCHOS@,${archos},g" \
  -e "s,@DEBUG@,${debug},g" \
  -e "s,@DISPLAY@,${display},g" \
  -e "s,@KEYPAD@,${keypad},g" \
  -e "s,@PWD@,${pwd},g" \
  -e "s,@LANGUAGE@,${language},g" \
  -e "s,@TARGET@,${target},g" \
  -e "s,@SIMVER@,${simver},g" \
 <<EOF
 ## Automaticly generated. http://rockbox.haxx.se

 ARCHOS=@ARCHOS@
 ROOTDIR=@ROOTDIR@
 SIMDIR=\$(ROOTDIR)/uisimulator/@SIMVER@
 TOOLSDIR=\$(ROOTDIR)/tools
 DEBUG=@DEBUG@
 DISPLAY=@DISPLAY@
 KEYPAD=@KEYPAD@
 THISDIR="@PWD@"
 SIMVER=@SIMVER@
 TARGET=@TARGET@
 LANGUAGE=@LANGUAGE@
 VERSION=\$(shell date +%y%m%d-%H%M)

 .PHONY:

 all: sim

 sim:
 	\$(MAKE) -C \$(SIMDIR) DISPLAY=\$(DISPLAY) KEYPAD=\$(KEYPAD) OBJDIR=\$(THISDIR) VERSION=\$(VERSION) LANGUAGE=\$(LANGUAGE)

 clean:
 	\$(MAKE) -C \$(SIMDIR) DISPLAY=\$(DISPLAY) KEYPAD=\$(KEYPAD) OBJDIR=\$(THISDIR) clean

 tags:
 	@rm -f TAGS
 	make -C \$(SIMDIR) DISPLAY=\$(DISPLAY) KEYPAD=\$(KEYPAD) OBJDIR=\$(THISDIR) tags

 zip:
 	\$(TOOLSDIR)/buildzip.pl sim\$(TARGET)

 install:
 	@echo "installing a full setup in your archos dir"
 	@(make zip && cd archos && unzip -oq ../rockbox.zip)
 EOF

   echo "Created Makefile"

   if [ -d "archos" ]; then
     echo "sub directory archos already present"
   else
     mkdir archos
     echo "created an archos subdirectory for simulating the hard disk"
   fi

 }

 picklang() {
     # figure out which languages that are around
     for file in $rootdir/apps/lang/*.lang; do
         clean=`echo $file | sed -e 's:.*/::g' | cut "-d." -f1`
         langs="$langs $clean"
     done

     num=1
     for one in $langs; do
         echo "$num. $one"
         num=`expr $num + 1`
     done

     read pick
     return $pick;
 }

 whichlang() {
     num=1
     for one in $langs; do
         if [ "$num" = "$pick" ]; then
             echo $one
             return
         fi
         num=`expr $num + 1`
     done
 }

 target=$1
 debug=$2

 if test "$1" = "--help"; then
   echo "Rockbox configure script."
   echo "Invoke this in a directory to generate a Makefile to build Rockbox"
   echo "Do *NOT* run this within the tools directory!"
   exit
 fi

 if test -r "configure"; then
  # this is a check for a configure script in the current directory, it there
  # is one, try to figure out if it is this one!

  if { grep "^#   Jukebox" configure >/dev/null 2>&1 ; } then
    echo "WEEEEEEEEP. Don't run this configure script within the tools directory."
    echo "It will only cause you pain and grief. Instead do this:"
    echo ""
    echo " cd .."
    echo " mkdir build-dir"
    echo " cd build-dir"
    echo " ../tools/configure"
    echo ""
    echo "Much happiness will arise from this. Enjoy"
    exit
  fi
 fi

 if [ "$target" = "--help" -o \
      "$target" = "-h" ]; then
   echo "Just invoke the script and answer the questions."
   echo "This script will write a Makefile for you"
   exit
 fi

 # get our current directory
 pwd=`pwd`;

 if [ "$target" = "update" ]; then
   update="1"
   target=""
   if [ -f Makefile ]; then
     if { grep "^## Auto" Makefile >/dev/null 2>&1 ; } then
       echo "Existing generated Makefile found. Getting defaults from it."
       archos=`grep "^ARCHOS=" Makefile | cut -d= -f2-`
       debug=`grep "^DEBUG=" Makefile | cut -d= -f2-`
       language=`grep "^LANGUAGE=" Makefile | cut -d= -f2-`
       memory=`grep "^MEMORYSIZE=" Makefile | cut -d= -f2-`
       rootdir=`grep "^ROOTDIR=" Makefile | cut -d= -f2-`
       target=`grep "^TARGET=" Makefile | cut -d= -f2-`

       if [ "$debug" = "SIMULATOR=1" ]; then
         simulator="yes"
         display=`grep "^DISPLAY=" Makefile | cut -d= -f2-`
         keypad=`grep "^KEYPAD=" Makefile | cut -d= -f2-`
         simver=`grep "^SIMVER=" Makefile | cut -d= -f2-`
       fi
     fi
   fi
 else

 echo "This script will setup your Rockbox build environment."
 echo "Further docs here: http://rockbox.haxx.se/docs/"
 echo ""

 fi

 if [ -z "$archos" ]; then

 ##################################################################
 # Figure out target platform
 #

   echo "Enter target platform: (default is Archos Recorder)"

   echo "1 - Archos Player/Studio"
   echo "2 - Archos Recorder"
   echo "3 - Archos FM Recorder"
   echo "4 - Archos Recorder v2"
   echo "5 - Neo mStation"
   echo "6 - Neo 35"

   getit=`input`;

   case $getit in

    1)
     archos="player"
     target="-DARCHOS_PLAYER"
     display="-DHAVE_LCD_CHARCELLS"
     keypad="-DHAVE_PLAYER_KEYPAD"
     ;;

    3)
     archos="fmrecorder"
     target="-DARCHOS_FMRECORDER"
     display="-DHAVE_LCD_BITMAP"
     keypad="-DHAVE_RECORDER_KEYPAD"
     ;;

    4)
     archos="recorderv2"
     target="-DARCHOS_RECORDERV2"
     display="-DHAVE_LCD_BITMAP"
     keypad="-DHAVE_RECORDER_KEYPAD"
     ;;

    5)
     archos="neomstation"
     target="-DNEO_MSTATION"
     display="-DHAVE_NEOLCD_CHARCELLS"
     keypad="-DHAVE_NEO_KEYPAD"
     ;;

    6)
     archos="neo35"
     target="-DNEO_35"
     display="-DHAVE_NEOLCD_CHARCELLS"
     keypad="-DHAVE_NEO_KEYPAD"
     ;;

    *)
     archos="recorder"
     target="-DARCHOS_RECORDER"
     display="-DHAVE_LCD_BITMAP"
     keypad="-DHAVE_RECORDER_KEYPAD"
     ;;

   esac

   echo "Platform set to $archos"

 fi

 if [ -z "$memory" ]; then
   size="2"
   if [ -z "$update" ]; then
     echo "Enter size of your RAM (in MB): (defaults to 2)"
     size=`input`;
   fi

   case $size in
    8)
     memory="8"
     ;;
    *)
     memory="2"
     ;;

   esac
   echo "Memory size selected: $memory MB"
 fi

 if [ -z "$debug" ]; then
   ##################################################################
   # Figure out debug on/off
   #
   echo "Build (N)ormal, (D)ebug or (S)imulated version? (N)"

   option=`input`;

   case $option in
     [Ss])
       debug="SIMULATOR=1"
       simulator="yes"
       echo "Simulator build selected"
       whichsim
       ;;
     [Dd])
       debug="DEBUG=1"
       echo "Debug build selected"
       ;;
     *)
       debug="NODEBUG=1"
       echo "Normal build selected"
       ;;

   esac
 fi

 if [ -z "$rootdir" ]; then
   ##################################################################
   # Figure out where the source code root is!
   #

   firmfile="crt0.S" # a file to check for in the firmware root dir

   for dir in  . .. ../.. ../rockbox*; do
     if [ -f $dir/firmware/$firmfile ]; then
      rootdir=$dir
      break
     fi
   done

   if [ -z "$rootdir" ]; then
     echo "This script couldn't find your source code root directory. Please enter the"
     echo "full path to the source code directory here:"

     firmdir=`input`
   fi

   #####################################################################
   # Convert the possibly relative directory name to an absolute version
   #
   now=`pwd`
   cd $rootdir
   rootdir=`pwd`

   echo "Using this source code root directory:"
   echo $rootdir
   echo ""

   # cd back to the build dir
   cd $now
 fi


 if [ -z "$language" ]; then

     echo "Select a number for the language to use (default is english)"

     picklang
     language=`whichlang`

     if [ -z "$language" ]; then
         # pick a default
         language="english"
     fi
     echo "Language set to $language"
 fi

 if [ "yes" = "$simulator" ]; then
     # we have already dealt with the simulator Makefile separately
     simul
     exit
 fi

 sed > Makefile \
  -e "s,@ROOTDIR@,${rootdir},g" \
  -e "s,@DEBUG@,${debug},g" \
  -e "s,@MEMORY@,${memory},g" \
  -e "s,@TARGET@,${target},g" \
  -e "s,@ARCHOS@,${archos},g" \
  -e "s,@LANGUAGE@,${language},g" \
  -e "s,@PWD@,${pwd},g" \
 <<EOF
 ## Automaticly generated. http://rockbox.haxx.se

 ROOTDIR=@ROOTDIR@
 FIRMDIR=\$(ROOTDIR)/firmware
 APPSDIR=\$(ROOTDIR)/apps
 TOOLSDIR=\$(ROOTDIR)/tools
 DEBUG=@DEBUG@
 ARCHOS=@ARCHOS@
 TARGET=@TARGET@
 THISDIR="@PWD@"
 LANGUAGE=@LANGUAGE@
 MEMORYSIZE=@MEMORY@
 VERSION=\$(shell date +%y%m%d-%H%M)

 .PHONY: firmware apps

 all: firmware apps

 firmware:
 	\$(MAKE) -C \$(FIRMDIR) TARGET=\$(TARGET) \$(DEBUG) OBJDIR=\$(THISDIR) MEM=\$(MEMORYSIZE) TOOLSDIR=\$(TOOLSDIR)

 apps:
 	\$(MAKE) -C \$(APPSDIR) TARGET=\$(TARGET) \$(DEBUG) OBJDIR=\$(THISDIR) VERSION=\$(VERSION) LANGUAGE=\$(LANGUAGE) MEM=\$(MEMORYSIZE) TOOLSDIR=\$(TOOLSDIR)

 clean-firmware:
 	\$(MAKE) -C \$(FIRMDIR) TARGET=\$(TARGET) OBJDIR=\$(THISDIR) clean

 clean-apps:
 	\$(MAKE) -C \$(APPSDIR) TARGET=\$(TARGET) OBJDIR=\$(THISDIR) clean

 clean:
 	\$(MAKE) clean-firmware clean-apps
 	rm -f rockbox.zip

 tags-firmware:
 	\$(MAKE) -C \$(FIRMDIR) TARGET=\$(TARGET) OBJDIR=\$(THISDIR) tags

 tags-apps:
 	\$(MAKE) -C \$(APPSDIR) TARGET=\$(TARGET) OBJDIR=\$(THISDIR) tags

 tags:
 	@rm -f TAGS
 	\$(MAKE) tags-firmware tags-apps

 zip:
 	\$(TOOLSDIR)/buildzip.pl \$(TARGET)
 EOF

 echo "Created Makefile"
	#!/bin/sh
	# __________ __ ___.
	# Open \______ \ ____ ____ \| \| _\_ \|__ _______ ___
	# Source \| _// _ \_/ ___\\| \|/ /\| __ \ / _ \ \/ /
	# Jukebox \| \| ( <_> ) \___\| < \| \_\ ( <_> > < <
	# Firmware \|____\|_ /\____/ \___ >__\|_ \\|___ /\____/__/\_ \
	# \/ \/ \/ \/ \/
	# $Id$
	#


	#
	# Begin Function Definitions
	#
	input() {
	read response
	echo $response
	}

	whichsim () {

	if [ -z "$simver" ]; then

	##################################################################
	# Figure out win32/x11 GUI
	#
	echo ""
	echo "Build (W)in32 or (X)11 GUI version? (X)"

	option=`input`;

	case $option in
	[Ww])
	simver="win32"
	;;
	*)
	simver="x11"
	;;
	esac
	echo "Selected $simver simulator"
	fi
	}


	simul () {

	sed > Makefile \
	-e "s,@ROOTDIR@,${rootdir},g" \
	-e "s,@ARCHOS@,${archos},g" \
	-e "s,@DEBUG@,${debug},g" \
	-e "s,@DISPLAY@,${display},g" \
	-e "s,@KEYPAD@,${keypad},g" \
	-e "s,@PWD@,${pwd},g" \
	-e "s,@LANGUAGE@,${language},g" \
	-e "s,@TARGET@,${target},g" \
	-e "s,@SIMVER@,${simver},g" \
	<<EOF
	## Automaticly generated. http://rockbox.haxx.se

	ARCHOS=@ARCHOS@
	ROOTDIR=@ROOTDIR@
	SIMDIR=\$(ROOTDIR)/uisimulator/@SIMVER@
	TOOLSDIR=\$(ROOTDIR)/tools
	DEBUG=@DEBUG@
	DISPLAY=@DISPLAY@
	KEYPAD=@KEYPAD@
	THISDIR="@PWD@"
	SIMVER=@SIMVER@
	TARGET=@TARGET@
	LANGUAGE=@LANGUAGE@
	VERSION=\$(shell date +%y%m%d-%H%M)

	.PHONY:

	all: sim

	sim:
	\$(MAKE) -C \$(SIMDIR) DISPLAY=\$(DISPLAY) KEYPAD=\$(KEYPAD) OBJDIR=\$(THISDIR) VERSION=\$(VERSION) LANGUAGE=\$(LANGUAGE)

	clean:
	\$(MAKE) -C \$(SIMDIR) DISPLAY=\$(DISPLAY) KEYPAD=\$(KEYPAD) OBJDIR=\$(THISDIR) clean

	tags:
	@rm -f TAGS
	make -C \$(SIMDIR) DISPLAY=\$(DISPLAY) KEYPAD=\$(KEYPAD) OBJDIR=\$(THISDIR) tags

	zip:
	\$(TOOLSDIR)/buildzip.pl sim\$(TARGET)

	install:
	@echo "installing a full setup in your archos dir"
	@(make zip && cd archos && unzip -oq ../rockbox.zip)
	EOF

	echo "Created Makefile"

	if [ -d "archos" ]; then
	echo "sub directory archos already present"
	else
	mkdir archos
	echo "created an archos subdirectory for simulating the hard disk"
	fi

	}

	picklang() {
	# figure out which languages that are around
	for file in $rootdir/apps/lang/*.lang; do
	clean=`echo $file \| sed -e 's:.*/::g' \| cut "-d." -f1`
	langs="$langs $clean"
	done

	num=1
	for one in $langs; do
	echo "$num. $one"
	num=`expr $num + 1`
	done

	read pick
	return $pick;
	}

	whichlang() {
	num=1
	for one in $langs; do
	if [ "$num" = "$pick" ]; then
	echo $one
	return
	fi
	num=`expr $num + 1`
	done
	}

	target=$1
	debug=$2

	if test "$1" = "--help"; then
	echo "Rockbox configure script."
	echo "Invoke this in a directory to generate a Makefile to build Rockbox"
	echo "Do NOT run this within the tools directory!"
	exit
	fi

	if test -r "configure"; then
	# this is a check for a configure script in the current directory, it there
	# is one, try to figure out if it is this one!

	if { grep "^# Jukebox" configure >/dev/null 2>&1 ; } then
	echo "WEEEEEEEEP. Don't run this configure script within the tools directory."
	echo "It will only cause you pain and grief. Instead do this:"
	echo ""
	echo " cd .."
	echo " mkdir build-dir"
	echo " cd build-dir"
	echo " ../tools/configure"
	echo ""
	echo "Much happiness will arise from this. Enjoy"
	exit
	fi
	fi

	if [ "$target" = "--help" -o \
	"$target" = "-h" ]; then
	echo "Just invoke the script and answer the questions."
	echo "This script will write a Makefile for you"
	exit
	fi

	# get our current directory
	pwd=`pwd`;

	if [ "$target" = "update" ]; then
	update="1"
	target=""
	if [ -f Makefile ]; then
	if { grep "^## Auto" Makefile >/dev/null 2>&1 ; } then
	echo "Existing generated Makefile found. Getting defaults from it."
	archos=`grep "^ARCHOS=" Makefile \| cut -d= -f2-`
	debug=`grep "^DEBUG=" Makefile \| cut -d= -f2-`
	language=`grep "^LANGUAGE=" Makefile \| cut -d= -f2-`
	memory=`grep "^MEMORYSIZE=" Makefile \| cut -d= -f2-`
	rootdir=`grep "^ROOTDIR=" Makefile \| cut -d= -f2-`
	target=`grep "^TARGET=" Makefile \| cut -d= -f2-`

	if [ "$debug" = "SIMULATOR=1" ]; then
	simulator="yes"
	display=`grep "^DISPLAY=" Makefile \| cut -d= -f2-`
	keypad=`grep "^KEYPAD=" Makefile \| cut -d= -f2-`
	simver=`grep "^SIMVER=" Makefile \| cut -d= -f2-`
	fi
	fi
	fi
	else

	echo "This script will setup your Rockbox build environment."
	echo "Further docs here: http://rockbox.haxx.se/docs/"
	echo ""

	fi

	if [ -z "$archos" ]; then

	##################################################################
	# Figure out target platform
	#

	echo "Enter target platform: (default is Archos Recorder)"

	echo "1 - Archos Player/Studio"
	echo "2 - Archos Recorder"
	echo "3 - Archos FM Recorder"
	echo "4 - Archos Recorder v2"
	echo "5 - Neo mStation"
	echo "6 - Neo 35"

	getit=`input`;

	case $getit in

	1)
	archos="player"
	target="-DARCHOS_PLAYER"
	display="-DHAVE_LCD_CHARCELLS"
	keypad="-DHAVE_PLAYER_KEYPAD"
	;;

	3)
	archos="fmrecorder"
	target="-DARCHOS_FMRECORDER"
	display="-DHAVE_LCD_BITMAP"
	keypad="-DHAVE_RECORDER_KEYPAD"
	;;

	4)
	archos="recorderv2"
	target="-DARCHOS_RECORDERV2"
	display="-DHAVE_LCD_BITMAP"
	keypad="-DHAVE_RECORDER_KEYPAD"
	;;

	5)
	archos="neomstation"
	target="-DNEO_MSTATION"
	display="-DHAVE_NEOLCD_CHARCELLS"
	keypad="-DHAVE_NEO_KEYPAD"
	;;

	6)
	archos="neo35"
	target="-DNEO_35"
	display="-DHAVE_NEOLCD_CHARCELLS"
	keypad="-DHAVE_NEO_KEYPAD"
	;;

	*)
	archos="recorder"
	target="-DARCHOS_RECORDER"
	display="-DHAVE_LCD_BITMAP"
	keypad="-DHAVE_RECORDER_KEYPAD"
	;;

	esac

	echo "Platform set to $archos"

	fi

	if [ -z "$memory" ]; then
	size="2"
	if [ -z "$update" ]; then
	echo "Enter size of your RAM (in MB): (defaults to 2)"
	size=`input`;
	fi

	case $size in
	8)
	memory="8"
	;;
	*)
	memory="2"
	;;

	esac
	echo "Memory size selected: $memory MB"
	fi

	if [ -z "$debug" ]; then
	##################################################################
	# Figure out debug on/off
	#
	echo "Build (N)ormal, (D)ebug or (S)imulated version? (N)"

	option=`input`;

	case $option in
	[Ss])
	debug="SIMULATOR=1"
	simulator="yes"
	echo "Simulator build selected"
	whichsim
	;;
	[Dd])
	debug="DEBUG=1"
	echo "Debug build selected"
	;;
	*)
	debug="NODEBUG=1"
	echo "Normal build selected"
	;;

	esac
	fi

	if [ -z "$rootdir" ]; then
	##################################################################
	# Figure out where the source code root is!
	#

	firmfile="crt0.S" # a file to check for in the firmware root dir

	for dir in . .. ../.. ../rockbox*; do
	if [ -f $dir/firmware/$firmfile ]; then
	rootdir=$dir
	break
	fi
	done

	if [ -z "$rootdir" ]; then
	echo "This script couldn't find your source code root directory. Please enter the"
	echo "full path to the source code directory here:"

	firmdir=`input`
	fi

	#####################################################################
	# Convert the possibly relative directory name to an absolute version
	#
	now=`pwd`
	cd $rootdir
	rootdir=`pwd`

	echo "Using this source code root directory:"
	echo $rootdir
	echo ""

	# cd back to the build dir
	cd $now
	fi


	if [ -z "$language" ]; then

	echo "Select a number for the language to use (default is english)"

	picklang
	language=`whichlang`

	if [ -z "$language" ]; then
	# pick a default
	language="english"
	fi
	echo "Language set to $language"
	fi

	if [ "yes" = "$simulator" ]; then
	# we have already dealt with the simulator Makefile separately
	simul
	exit
	fi

	sed > Makefile \
	-e "s,@ROOTDIR@,${rootdir},g" \
	-e "s,@DEBUG@,${debug},g" \
	-e "s,@MEMORY@,${memory},g" \
	-e "s,@TARGET@,${target},g" \
	-e "s,@ARCHOS@,${archos},g" \
	-e "s,@LANGUAGE@,${language},g" \
	-e "s,@PWD@,${pwd},g" \
	<<EOF
	## Automaticly generated. http://rockbox.haxx.se

	ROOTDIR=@ROOTDIR@
	FIRMDIR=\$(ROOTDIR)/firmware
	APPSDIR=\$(ROOTDIR)/apps
	TOOLSDIR=\$(ROOTDIR)/tools
	DEBUG=@DEBUG@
	ARCHOS=@ARCHOS@
	TARGET=@TARGET@
	THISDIR="@PWD@"
	LANGUAGE=@LANGUAGE@
	MEMORYSIZE=@MEMORY@
	VERSION=\$(shell date +%y%m%d-%H%M)

	.PHONY: firmware apps

	all: firmware apps

	firmware:
	\$(MAKE) -C \$(FIRMDIR) TARGET=\$(TARGET) \$(DEBUG) OBJDIR=\$(THISDIR) MEM=\$(MEMORYSIZE) TOOLSDIR=\$(TOOLSDIR)

	apps:
	\$(MAKE) -C \$(APPSDIR) TARGET=\$(TARGET) \$(DEBUG) OBJDIR=\$(THISDIR) VERSION=\$(VERSION) LANGUAGE=\$(LANGUAGE) MEM=\$(MEMORYSIZE) TOOLSDIR=\$(TOOLSDIR)

	clean-firmware:
	\$(MAKE) -C \$(FIRMDIR) TARGET=\$(TARGET) OBJDIR=\$(THISDIR) clean

	clean-apps:
	\$(MAKE) -C \$(APPSDIR) TARGET=\$(TARGET) OBJDIR=\$(THISDIR) clean

	clean:
	\$(MAKE) clean-firmware clean-apps
	rm -f rockbox.zip

	tags-firmware:
	\$(MAKE) -C \$(FIRMDIR) TARGET=\$(TARGET) OBJDIR=\$(THISDIR) tags

	tags-apps:
	\$(MAKE) -C \$(APPSDIR) TARGET=\$(TARGET) OBJDIR=\$(THISDIR) tags

	tags:
	@rm -f TAGS
	\$(MAKE) tags-firmware tags-apps

	zip:
	\$(TOOLSDIR)/buildzip.pl \$(TARGET)
	EOF

	echo "Created Makefile"