| /*************************************************************************** |
| * __________ __ ___. |
| * Open \______ \ ____ ____ | | _\_ |__ _______ ___ |
| * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / |
| * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < |
| * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ |
| * \/ \/ \/ \/ \/ |
| * $Id$ |
| * |
| * Copyright (C) 2006 by Barry Wardell |
| * |
| * Based on Rockbox iriver bootloader by Linus Nielsen Feltzing |
| * and the ipodlinux bootloader by Daniel Palffy and Bernard Leach |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ****************************************************************************/ |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include "common.h" |
| #include "cpu.h" |
| #include "file.h" |
| #include "system.h" |
| #include "kernel.h" |
| #include "lcd.h" |
| #include "font.h" |
| #include "ata.h" |
| #include "button.h" |
| #include "disk.h" |
| #include "crc32-mi4.h" |
| #include <string.h> |
| #include "power.h" |
| #if defined(SANSA_E200) || defined(PHILIPS_SA9200) |
| #include "i2c.h" |
| #include "backlight-target.h" |
| #endif |
| #if defined(SANSA_E200) || defined(SANSA_C200) || defined(PHILIPS_SA9200) |
| #include "usb.h" |
| #include "usb_drv.h" |
| #endif |
| |
| /* Show the Rockbox logo - in show_logo.c */ |
| extern int show_logo(void); |
| |
| /* Button definitions */ |
| #if CONFIG_KEYPAD == IRIVER_H10_PAD |
| #define BOOTLOADER_BOOT_OF BUTTON_LEFT |
| |
| #elif CONFIG_KEYPAD == SANSA_E200_PAD |
| #define BOOTLOADER_BOOT_OF BUTTON_LEFT |
| |
| #elif CONFIG_KEYPAD == SANSA_C200_PAD |
| #define BOOTLOADER_BOOT_OF BUTTON_LEFT |
| |
| #elif CONFIG_KEYPAD == MROBE100_PAD |
| #define BOOTLOADER_BOOT_OF BUTTON_POWER |
| |
| #elif CONFIG_KEYPAD == PHILIPS_SA9200_PAD |
| #define BOOTLOADER_BOOT_OF BUTTON_VOL_UP |
| |
| #elif CONFIG_KEYPAD == PHILIPS_HDD1630_PAD |
| #define BOOTLOADER_BOOT_OF BUTTON_MENU |
| |
| #endif |
| |
| /* Maximum allowed firmware image size. 10MB is more than enough */ |
| #define MAX_LOADSIZE (10*1024*1024) |
| |
| /* A buffer to load the original firmware or Rockbox into */ |
| unsigned char *loadbuffer = (unsigned char *)DRAM_START; |
| |
| /* Bootloader version */ |
| char version[] = APPSVERSION; |
| |
| /* Locations and sizes in hidden partition on Sansa */ |
| #if defined(HAVE_ATA_SD) |
| #define PPMI_SECTOR_OFFSET 1024 |
| #define PPMI_SECTORS 1 |
| #define MI4_HEADER_SECTORS 1 |
| #define NUM_PARTITIONS 2 |
| |
| #else |
| #define NUM_PARTITIONS 1 |
| |
| #endif |
| |
| #define MI4_HEADER_SIZE 0x200 |
| |
| /* mi4 header structure */ |
| struct mi4header_t { |
| unsigned char magic[4]; |
| uint32_t version; |
| uint32_t length; |
| uint32_t crc32; |
| uint32_t enctype; |
| uint32_t mi4size; |
| uint32_t plaintext; |
| uint32_t dsa_key[10]; |
| uint32_t pad[109]; |
| unsigned char type[4]; |
| unsigned char model[4]; |
| }; |
| |
| /* PPMI header structure */ |
| struct ppmi_header_t { |
| unsigned char magic[4]; |
| uint32_t length; |
| uint32_t pad[126]; |
| }; |
| |
| inline unsigned int le2int(unsigned char* buf) |
| { |
| int32_t res = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; |
| |
| return res; |
| } |
| |
| inline void int2le(unsigned int val, unsigned char* addr) |
| { |
| addr[0] = val & 0xFF; |
| addr[1] = (val >> 8) & 0xff; |
| addr[2] = (val >> 16) & 0xff; |
| addr[3] = (val >> 24) & 0xff; |
| } |
| |
| struct tea_key { |
| const char * name; |
| uint32_t key[4]; |
| }; |
| |
| #define NUM_KEYS (sizeof(tea_keytable)/sizeof(tea_keytable[0])) |
| struct tea_key tea_keytable[] = { |
| { "default" , { 0x20d36cc0, 0x10e8c07d, 0xc0e7dcaa, 0x107eb080 } }, |
| { "sansa", { 0xe494e96e, 0x3ee32966, 0x6f48512b, 0xa93fbb42 } }, |
| { "sansa_gh", { 0xd7b10538, 0xc662945b, 0x1b3fce68, 0xf389c0e6 } }, |
| { "sansa_103", { 0x1d29ddc0, 0x2579c2cd, 0xce339e1a, 0x75465dfe } }, |
| { "rhapsody", { 0x7aa9c8dc, 0xbed0a82a, 0x16204cc7, 0x5904ef38 } }, |
| { "p610", { 0x950e83dc, 0xec4907f9, 0x023734b9, 0x10cfb7c7 } }, |
| { "p640", { 0x220c5f23, 0xd04df68e, 0x431b5e25, 0x4dcc1fa1 } }, |
| { "virgin", { 0xe83c29a1, 0x04862973, 0xa9b3f0d4, 0x38be2a9c } }, |
| { "20gc_eng", { 0x0240772c, 0x6f3329b5, 0x3ec9a6c5, 0xb0c9e493 } }, |
| { "20gc_fre", { 0xbede8817, 0xb23bfe4f, 0x80aa682d, 0xd13f598c } }, |
| { "elio_p722", { 0x6af3b9f8, 0x777483f5, 0xae8181cc, 0xfa6d8a84 } }, |
| { "c200", { 0xbf2d06fa, 0xf0e23d59, 0x29738132, 0xe2d04ca7 } }, |
| { "c200_103", { 0x2a7968de, 0x15127979, 0x142e60a7, 0xe49c1893 } }, |
| { "c200_106", { 0xa913d139, 0xf842f398, 0x3e03f1a6, 0x060ee012 } }, |
| { "view", { 0x70e19bda, 0x0c69ea7d, 0x2b8b1ad1, 0xe9767ced } }, |
| { "sa9200", { 0x33ea0236, 0x9247bdc5, 0xdfaedf9f, 0xd67c9d30 } }, |
| { "hdd1630", { 0x04543ced, 0xcebfdbad, 0xf7477872, 0x0d12342e } }, |
| }; |
| |
| /* |
| |
| tea_decrypt() from http://en.wikipedia.org/wiki/Tiny_Encryption_Algorithm |
| |
| "Following is an adaptation of the reference encryption and decryption |
| routines in C, released into the public domain by David Wheeler and |
| Roger Needham:" |
| |
| */ |
| |
| /* NOTE: The mi4 version of TEA uses a different initial value to sum compared |
| to the reference implementation and the main loop is 8 iterations, not |
| 32. |
| */ |
| |
| static void tea_decrypt(uint32_t* v0, uint32_t* v1, uint32_t* k) { |
| uint32_t sum=0xF1BBCDC8, i; /* set up */ |
| uint32_t delta=0x9E3779B9; /* a key schedule constant */ |
| uint32_t k0=k[0], k1=k[1], k2=k[2], k3=k[3]; /* cache key */ |
| for(i=0; i<8; i++) { /* basic cycle start */ |
| *v1 -= ((*v0<<4) + k2) ^ (*v0 + sum) ^ ((*v0>>5) + k3); |
| *v0 -= ((*v1<<4) + k0) ^ (*v1 + sum) ^ ((*v1>>5) + k1); |
| sum -= delta; /* end cycle */ |
| } |
| } |
| |
| /* mi4 files are encrypted in 64-bit blocks (two little-endian 32-bit |
| integers) and the key is incremented after each block |
| */ |
| |
| static void tea_decrypt_buf(unsigned char* src, unsigned char* dest, size_t n, uint32_t * key) |
| { |
| uint32_t v0, v1; |
| unsigned int i; |
| |
| for (i = 0; i < (n / 8); i++) { |
| v0 = le2int(src); |
| v1 = le2int(src+4); |
| |
| tea_decrypt(&v0, &v1, key); |
| |
| int2le(v0, dest); |
| int2le(v1, dest+4); |
| |
| src += 8; |
| dest += 8; |
| |
| /* Now increment the key */ |
| key[0]++; |
| if (key[0]==0) { |
| key[1]++; |
| if (key[1]==0) { |
| key[2]++; |
| if (key[2]==0) { |
| key[3]++; |
| } |
| } |
| } |
| } |
| } |
| |
| static inline bool tea_test_key(unsigned char magic_enc[8], uint32_t * key, int unaligned) |
| { |
| unsigned char magic_dec[8]; |
| tea_decrypt_buf(magic_enc, magic_dec, 8, key); |
| |
| return (le2int(&magic_dec[4*unaligned]) == 0xaa55aa55); |
| } |
| |
| static int tea_find_key(struct mi4header_t *mi4header, int fd) |
| { |
| unsigned int i; |
| int rc; |
| unsigned int j; |
| uint32_t key[4]; |
| unsigned char magic_enc[8]; |
| int key_found = -1; |
| unsigned int magic_location = mi4header->length-4; |
| int unaligned = 0; |
| |
| if ( (magic_location % 8) != 0 ) |
| { |
| unaligned = 1; |
| magic_location -= 4; |
| } |
| |
| /* Load encrypted magic 0xaa55aa55 to check key */ |
| lseek(fd, MI4_HEADER_SIZE + magic_location, SEEK_SET); |
| rc = read(fd, magic_enc, 8); |
| if(rc < 8 ) |
| return EREAD_IMAGE_FAILED; |
| |
| printf("Searching for key:"); |
| |
| for (i=0; i < NUM_KEYS && (key_found<0) ; i++) { |
| key[0] = tea_keytable[i].key[0]; |
| key[1] = tea_keytable[i].key[1]; |
| key[2] = tea_keytable[i].key[2]; |
| key[3] = tea_keytable[i].key[3]; |
| |
| /* Now increment the key */ |
| for(j=0; j<((magic_location-mi4header->plaintext)/8); j++){ |
| key[0]++; |
| if (key[0]==0) { |
| key[1]++; |
| if (key[1]==0) { |
| key[2]++; |
| if (key[2]==0) { |
| key[3]++; |
| } |
| } |
| } |
| } |
| |
| if (tea_test_key(magic_enc,key,unaligned)) |
| { |
| key_found = i; |
| printf("%s...found", tea_keytable[i].name); |
| } else { |
| /* printf("%s...failed", tea_keytable[i].name); */ |
| } |
| } |
| |
| return key_found; |
| } |
| |
| |
| /* Load mi4 format firmware image */ |
| int load_mi4(unsigned char* buf, char* firmware, unsigned int buffer_size) |
| { |
| int fd; |
| struct mi4header_t mi4header; |
| int rc; |
| unsigned long sum; |
| char filename[MAX_PATH]; |
| |
| snprintf(filename,sizeof(filename),"/.rockbox/%s",firmware); |
| fd = open(filename, O_RDONLY); |
| if(fd < 0) |
| { |
| snprintf(filename,sizeof(filename),"/%s",firmware); |
| fd = open(filename, O_RDONLY); |
| if(fd < 0) |
| return EFILE_NOT_FOUND; |
| } |
| |
| read(fd, &mi4header, MI4_HEADER_SIZE); |
| |
| /* MI4 file size */ |
| printf("mi4 size: %x", mi4header.mi4size); |
| |
| if ((mi4header.mi4size-MI4_HEADER_SIZE) > buffer_size) |
| return EFILE_TOO_BIG; |
| |
| /* CRC32 */ |
| printf("CRC32: %x", mi4header.crc32); |
| |
| /* Rockbox model id */ |
| printf("Model id: %.4s", mi4header.model); |
| |
| /* Read binary type (RBOS, RBBL) */ |
| printf("Binary type: %.4s", mi4header.type); |
| |
| /* Load firmware file */ |
| lseek(fd, MI4_HEADER_SIZE, SEEK_SET); |
| rc = read(fd, buf, mi4header.mi4size-MI4_HEADER_SIZE); |
| if(rc < (int)mi4header.mi4size-MI4_HEADER_SIZE) |
| return EREAD_IMAGE_FAILED; |
| |
| /* Check CRC32 to see if we have a valid file */ |
| sum = chksum_crc32 (buf, mi4header.mi4size - MI4_HEADER_SIZE); |
| |
| printf("Calculated CRC32: %x", sum); |
| |
| if(sum != mi4header.crc32) |
| return EBAD_CHKSUM; |
| |
| if( (mi4header.plaintext + MI4_HEADER_SIZE) != mi4header.mi4size) |
| { |
| /* Load encrypted firmware */ |
| int key_index = tea_find_key(&mi4header, fd); |
| |
| if (key_index < 0) |
| return EINVALID_FORMAT; |
| |
| /* Plaintext part is already loaded */ |
| buf += mi4header.plaintext; |
| |
| /* Decrypt in-place */ |
| tea_decrypt_buf(buf, buf, |
| mi4header.mi4size-(mi4header.plaintext+MI4_HEADER_SIZE), |
| tea_keytable[key_index].key); |
| |
| printf("%s key used", tea_keytable[key_index].name); |
| |
| /* Check decryption was successfull */ |
| if(le2int(&buf[mi4header.length-mi4header.plaintext-4]) != 0xaa55aa55) |
| { |
| return EREAD_IMAGE_FAILED; |
| } |
| } |
| |
| return EOK; |
| } |
| |
| #if defined(HAVE_ATA_SD) |
| /* Load mi4 firmware from a hidden disk partition */ |
| int load_mi4_part(unsigned char* buf, struct partinfo* pinfo, |
| unsigned int buffer_size, bool disable_rebuild) |
| { |
| struct mi4header_t mi4header; |
| struct ppmi_header_t ppmi_header; |
| unsigned long sum; |
| |
| /* Read header to find out how long the mi4 file is. */ |
| ata_read_sectors(IF_MV2(0,) pinfo->start + PPMI_SECTOR_OFFSET, |
| PPMI_SECTORS, &ppmi_header); |
| |
| /* The first four characters at 0x80000 (sector 1024) should be PPMI*/ |
| if( memcmp(ppmi_header.magic, "PPMI", 4) ) |
| return EFILE_NOT_FOUND; |
| |
| printf("BL mi4 size: %x", ppmi_header.length); |
| |
| /* Read mi4 header of the OF */ |
| ata_read_sectors(IF_MV2(0,) pinfo->start + PPMI_SECTOR_OFFSET + PPMI_SECTORS |
| + (ppmi_header.length/512), MI4_HEADER_SECTORS, &mi4header); |
| |
| /* We don't support encrypted mi4 files yet */ |
| if( (mi4header.plaintext) != (mi4header.mi4size-MI4_HEADER_SIZE)) |
| return EINVALID_FORMAT; |
| |
| /* MI4 file size */ |
| printf("OF mi4 size: %x", mi4header.mi4size); |
| |
| if ((mi4header.mi4size-MI4_HEADER_SIZE) > buffer_size) |
| return EFILE_TOO_BIG; |
| |
| /* CRC32 */ |
| printf("CRC32: %x", mi4header.crc32); |
| |
| /* Rockbox model id */ |
| printf("Model id: %.4s", mi4header.model); |
| |
| /* Read binary type (RBOS, RBBL) */ |
| printf("Binary type: %.4s", mi4header.type); |
| |
| /* Load firmware */ |
| ata_read_sectors(IF_MV2(0,) pinfo->start + PPMI_SECTOR_OFFSET + PPMI_SECTORS |
| + (ppmi_header.length/512) + MI4_HEADER_SECTORS, |
| (mi4header.mi4size-MI4_HEADER_SIZE)/512, buf); |
| |
| /* Check CRC32 to see if we have a valid file */ |
| sum = chksum_crc32 (buf,mi4header.mi4size-MI4_HEADER_SIZE); |
| |
| printf("Calculated CRC32: %x", sum); |
| |
| if(sum != mi4header.crc32) |
| return EBAD_CHKSUM; |
| |
| #ifdef SANSA_E200 |
| if (disable_rebuild) |
| { |
| char block[512]; |
| |
| printf("Disabling database rebuild"); |
| |
| ata_read_sectors(IF_MV2(0,) pinfo->start + 0x3c08, 1, block); |
| block[0xe1] = 0; |
| ata_write_sectors(IF_MV2(0,) pinfo->start + 0x3c08, 1, block); |
| } |
| #else |
| (void) disable_rebuild; |
| #endif |
| |
| return EOK; |
| } |
| #endif |
| |
| void* main(void) |
| { |
| int i; |
| int btn; |
| int rc; |
| int num_partitions; |
| struct partinfo* pinfo; |
| #if defined(SANSA_E200) || defined(SANSA_C200) || defined(PHILIPS_SA9200) |
| int usb_retry = 0; |
| bool usb = false; |
| #else |
| char buf[256]; |
| unsigned short* identify_info; |
| #endif |
| |
| chksum_crc32gentab (); |
| |
| system_init(); |
| kernel_init(); |
| |
| lcd_init(); |
| |
| font_init(); |
| show_logo(); |
| |
| button_init(); |
| #if defined(SANSA_E200) || defined(PHILIPS_SA9200) |
| i2c_init(); |
| _backlight_on(); |
| #endif |
| |
| if (button_hold()) |
| { |
| verbose = true; |
| lcd_clear_display(); |
| printf("Hold switch on"); |
| printf("Shutting down..."); |
| sleep(HZ); |
| power_off(); |
| } |
| |
| btn = button_read_device(); |
| |
| /* Enable bootloader messages if any button is pressed */ |
| if (btn) { |
| lcd_clear_display(); |
| verbose = true; |
| } |
| |
| #if defined(SANSA_E200) || defined(SANSA_C200) || defined(PHILIPS_SA9200) |
| #if !defined(USE_ROCKBOX_USB) |
| usb_init(); |
| while (usb_drv_powered() && usb_retry < 5 && !usb) |
| { |
| usb_retry++; |
| sleep(HZ/4); |
| usb = (usb_detect() == USB_INSERTED); |
| } |
| if (usb) |
| btn |= BOOTLOADER_BOOT_OF; |
| #endif /* USE_ROCKBOX_USB */ |
| #endif |
| |
| lcd_setfont(FONT_SYSFIXED); |
| |
| printf("Rockbox boot loader"); |
| printf("Version: %s", version); |
| printf(MODEL_NAME); |
| |
| i=ata_init(); |
| #if !defined(HAVE_ATA_SD) |
| if (i==0) { |
| identify_info=ata_get_identify(); |
| /* Show model */ |
| for (i=0; i < 20; i++) { |
| ((unsigned short*)buf)[i]=htobe16(identify_info[i+27]); |
| } |
| buf[40]=0; |
| for (i=39; i && buf[i]==' '; i--) { |
| buf[i]=0; |
| } |
| printf(buf); |
| } else { |
| error(EATA, i); |
| } |
| #endif |
| |
| disk_init(IF_MV(0)); |
| num_partitions = disk_mount_all(); |
| if (num_partitions<=0) |
| { |
| error(EDISK,num_partitions); |
| } |
| |
| /* Just list the first 2 partitions since we don't have any devices yet |
| that have more than that */ |
| for(i=0; i<NUM_PARTITIONS; i++) |
| { |
| pinfo = disk_partinfo(i); |
| printf("Partition %d: 0x%02x %ld MB", |
| i, pinfo->type, pinfo->size / 2048); |
| } |
| |
| if(btn & BOOTLOADER_BOOT_OF) |
| { |
| /* Load original mi4 firmware in to a memory buffer called loadbuffer. |
| The rest of the loading is done in crt0.S. |
| 1) First try reading from the hidden partition (on Sansa only). |
| 2) Next try a decrypted mi4 file in /System/OF.mi4 |
| 3) Finally, try a raw firmware binary in /System/OF.mi4. It should be |
| a mi4 firmware decrypted and header stripped using mi4code. |
| */ |
| printf("Loading original firmware..."); |
| |
| #if defined(HAVE_ATA_SD) |
| /* First try a (hidden) firmware partition */ |
| printf("Trying firmware partition"); |
| pinfo = disk_partinfo(1); |
| if(pinfo->type == PARTITION_TYPE_OS2_HIDDEN_C_DRIVE) |
| { |
| rc = load_mi4_part(loadbuffer, pinfo, MAX_LOADSIZE, usb); |
| if (rc < EOK) { |
| printf("Can't load from partition"); |
| printf(strerror(rc)); |
| } else { |
| return (void*)loadbuffer; |
| } |
| } else { |
| printf("No hidden partition found."); |
| } |
| #endif |
| |
| printf("Trying /System/OF.mi4"); |
| rc=load_mi4(loadbuffer, "/System/OF.mi4", MAX_LOADSIZE); |
| if (rc < EOK) { |
| printf("Can't load /System/OF.mi4"); |
| printf(strerror(rc)); |
| } else { |
| return (void*)loadbuffer; |
| } |
| |
| printf("Trying /System/OF.bin"); |
| rc=load_raw_firmware(loadbuffer, "/System/OF.bin", MAX_LOADSIZE); |
| if (rc < EOK) { |
| printf("Can't load /System/OF.bin"); |
| printf(strerror(rc)); |
| } else { |
| return (void*)loadbuffer; |
| } |
| |
| error(0, 0); |
| |
| } else { |
| #if 0 /* e200: enable to be able to dump the hidden partition */ |
| if(btn & BUTTON_UP) |
| { |
| int fd; |
| pinfo = disk_partinfo(1); |
| fd = open("/part.bin", O_CREAT|O_RDWR); |
| char sector[512]; |
| for(i=0; i<40960; i++){ |
| if (!(i%100)) |
| { |
| printf("dumping sector %d", i); |
| } |
| ata_read_sectors(IF_MV2(0,) pinfo->start + i, 1, sector); |
| write(fd,sector,512); |
| } |
| close(fd); |
| } |
| #endif |
| printf("Loading Rockbox..."); |
| rc=load_mi4(loadbuffer, BOOTFILE, MAX_LOADSIZE); |
| if (rc < EOK) { |
| printf("Can't load %s:", BOOTFILE); |
| printf(strerror(rc)); |
| |
| #ifdef OLD_BOOTFILE |
| /* Try loading rockbox from old rockbox.e200/rockbox.h10 format */ |
| rc=load_firmware(loadbuffer, OLD_BOOTFILE, MAX_LOADSIZE); |
| if (rc < EOK) { |
| printf("Can't load %s:", OLD_BOOTFILE); |
| error(EBOOTFILE, rc); |
| } |
| #endif |
| } |
| } |
| |
| return (void*)loadbuffer; |
| } |
| |
| #if !defined(SANSA_E200) && !defined(SANSA_C200) && !defined(PHILIPS_SA9200) |
| /* These functions are present in the firmware library, but we reimplement |
| them here because the originals do a lot more than we want */ |
| void usb_acknowledge(void) |
| { |
| } |
| |
| void usb_wait_for_disconnect(void) |
| { |
| } |
| #endif |
| |