| /*************************************************************************** |
| * __________ __ ___. |
| * Open \______ \ ____ ____ | | _\_ |__ _______ ___ |
| * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / |
| * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < |
| * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ |
| * \/ \/ \/ \/ \/ |
| * $Id$ |
| * |
| * Copyright (C) 2007 by Dave Chapman |
| * |
| * Based on Rockbox iriver bootloader by Linus Nielsen Feltzing |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ****************************************************************************/ |
| #include "config.h" |
| |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <string.h> |
| #include "cpu.h" |
| #include "system.h" |
| #include "lcd.h" |
| #include "kernel.h" |
| #include "thread.h" |
| #include "ata.h" |
| #include "fat.h" |
| #include "disk.h" |
| #include "font.h" |
| #include "button.h" |
| #include "adc.h" |
| #include "adc-target.h" |
| #include "backlight.h" |
| #include "backlight-target.h" |
| #include "panic.h" |
| #include "power.h" |
| #include "file.h" |
| #include "common.h" |
| |
| #if defined(COWON_D2) |
| #include "pcf50606.h" |
| #define LOAD_ADDRESS 0x20000000 /* DRAM_START */ |
| #endif |
| |
| char version[] = APPSVERSION; |
| |
| extern int line; |
| |
| #define MAX_LOAD_SIZE (8*1024*1024) /* Arbitrary, but plenty. */ |
| |
| /* The following function is just test/development code */ |
| #ifdef CPU_TCC77X |
| void show_debug_screen(void) |
| { |
| int button; |
| int power_count = 0; |
| int count = 0; |
| bool do_power_off = false; |
| |
| /*lcd_puts_scroll(0,0,"this is a very long line to test scrolling");*/ |
| while(!do_power_off) { |
| |
| line = 1; |
| button = button_get(false); |
| |
| /* Power-off if POWER button has been held for a long time |
| This loop is currently running at about 100 iterations/second |
| */ |
| if (button & POWEROFF_BUTTON) { |
| power_count++; |
| if (power_count > 200) |
| do_power_off = true; |
| } else { |
| power_count = 0; |
| } |
| |
| if (button & BUTTON_SELECT){ |
| _backlight_off(); |
| } |
| else{ |
| _backlight_on(); |
| } |
| |
| /*printf("Btn: 0x%08x",button); |
| printf("Tick: %d",current_tick); |
| printf("GPIOA: 0x%08x",GPIOA); |
| printf("GPIOB: 0x%08x",GPIOB); |
| printf("GPIOC: 0x%08x",GPIOC); |
| printf("GPIOD: 0x%08x",GPIOD); |
| printf("GPIOE: 0x%08x",GPIOE);*/ |
| |
| #if 0 |
| int i; |
| for (i = 1; i<4; i++) |
| { |
| printf("ADC%d: 0x%04x",i,adc_read(i)); |
| } |
| #endif |
| count++; |
| printf("Count: %d",count); |
| sleep(HZ/10); |
| |
| } |
| |
| lcd_clear_display(); |
| line = 0; |
| printf("POWER-OFF"); |
| |
| /* Power-off */ |
| power_off(); |
| |
| printf("(NOT) POWERED OFF"); |
| while (true); |
| |
| } |
| #else /* !CPU_TCC77X */ |
| void show_debug_screen(void) |
| { |
| int button; |
| int power_count = 0; |
| int count = 0; |
| bool do_power_off = false; |
| #ifdef HAVE_BUTTON_DATA |
| unsigned int data; |
| #endif |
| |
| while(!do_power_off) { |
| line = 0; |
| printf("Hello World!"); |
| |
| #ifdef HAVE_BUTTON_DATA |
| button = button_read_device(&data); |
| #else |
| button = button_read_device(); |
| #endif |
| |
| /* Power-off if POWER button has been held for a long time |
| This loop is currently running at about 100 iterations/second |
| */ |
| if (button & POWEROFF_BUTTON) { |
| power_count++; |
| if (power_count > 200) |
| do_power_off = true; |
| } else { |
| power_count = 0; |
| } |
| |
| printf("Btn: 0x%08x",button); |
| |
| count++; |
| printf("Count: %d",count); |
| } |
| |
| lcd_clear_display(); |
| line = 0; |
| printf("POWER-OFF"); |
| |
| /* Power-off */ |
| power_off(); |
| |
| printf("(NOT) POWERED OFF"); |
| while (true); |
| } |
| #endif |
| |
| void* main(void) |
| { |
| #if defined(COWON_D2) && defined(TCCBOOT) |
| int rc; |
| unsigned char* loadbuffer = (unsigned char*)LOAD_ADDRESS; |
| #endif |
| |
| power_init(); |
| system_init(); |
| #ifndef COWON_D2 |
| /* The D2 doesn't enable threading or interrupts */ |
| kernel_init(); |
| enable_irq(); |
| #endif |
| lcd_init(); |
| |
| adc_init(); |
| button_init(); |
| backlight_init(); |
| |
| font_init(); |
| lcd_setfont(FONT_SYSFIXED); |
| |
| _backlight_on(); |
| |
| /* Only load the firmware if TCCBOOT is defined - this ensures SDRAM_START is |
| available for loading the firmware. Otherwise display the debug screen. */ |
| #if defined(COWON_D2) && defined(TCCBOOT) |
| printf("Rockbox boot loader"); |
| printf("Version %s", version); |
| |
| printf("ATA"); |
| rc = ata_init(); |
| if(rc) |
| { |
| reset_screen(); |
| error(EATA, rc); |
| } |
| |
| printf("mount"); |
| rc = disk_mount_all(); |
| if (rc<=0) |
| { |
| error(EDISK,rc); |
| } |
| |
| rc = load_firmware(loadbuffer, BOOTFILE, MAX_LOAD_SIZE); |
| |
| if (rc < 0) |
| { |
| error(EBOOTFILE,rc); |
| } |
| else if (rc == EOK) |
| { |
| int(*kernel_entry)(void); |
| |
| kernel_entry = (void*) loadbuffer; |
| rc = kernel_entry(); |
| } |
| #else |
| show_debug_screen(); |
| #endif |
| |
| return 0; |
| } |
| |
| /* These functions are present in the firmware library, but we reimplement |
| them here because the originals do a lot more than we want */ |
| void usb_acknowledge(void) |
| { |
| } |
| |
| void usb_wait_for_disconnect(void) |
| { |
| } |