| /* |
| * This config file is for the Creative Zen X-Fi |
| */ |
| #define IMX233_SUBTARGET 3700 |
| #define IMX233_PACKAGE IMX233_BGA169 |
| #define IMX233_PARTITIONS IMX233_CREATIVE |
| |
| /* For Rolo and boot loader */ |
| #define MODEL_NUMBER 86 |
| #define MODEL_NAME "Creative Zen X-Fi" |
| |
| #define HW_SAMPR_CAPS SAMPR_CAP_ALL |
| |
| /* define this if you have recording possibility */ |
| #define HAVE_RECORDING |
| |
| #define REC_SAMPR_CAPS SAMPR_CAP_ALL |
| |
| /* Default recording levels */ |
| #define DEFAULT_REC_MIC_GAIN 23 |
| #define DEFAULT_REC_LEFT_GAIN 23 |
| #define DEFAULT_REC_RIGHT_GAIN 23 |
| |
| /* Define bitmask of input sources - recordable bitmask can be defined |
| explicitly if different */ |
| #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) |
| |
| /* define this if you have a bitmap LCD display */ |
| #define HAVE_LCD_BITMAP |
| /* define this if you have a colour LCD */ |
| #define HAVE_LCD_COLOR |
| |
| #ifndef BOOTLOADER |
| #define HAVE_ALBUMART |
| |
| /* define this to enable bitmap scaling */ |
| #define HAVE_BMP_SCALING |
| |
| /* define this to enable JPEG decoding */ |
| #define HAVE_JPEG |
| |
| /* Define this if a programmable hotkey is mapped */ |
| #define HAVE_HOTKEY |
| |
| /* define this if you have access to the quickscreen */ |
| #define HAVE_QUICKSCREEN |
| |
| |
| /* define this if you would like tagcache to build on this target */ |
| #define HAVE_TAGCACHE |
| |
| /* define this if the target has volume keys which can be used in the lists */ |
| #define HAVE_VOLUME_IN_LIST |
| |
| /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE |
| should be defined as well. |
| #define HAVE_LCD_SLEEP |
| #define HAVE_LCD_SLEEP_SETTING |
| */ |
| |
| /* define this if you can flip your LCD |
| #define HAVE_LCD_FLIP |
| */ |
| |
| /* define this if you can invert the colours on your LCD |
| #define HAVE_LCD_INVERT |
| */ |
| |
| /* define this if you have a real-time clock */ |
| #define CONFIG_RTC RTC_IMX233 |
| |
| /* define this if you have a real-time clock with alarm facilities */ |
| #define HAVE_RTC_ALARM |
| |
| #endif /* !BOOTLOADER */ |
| |
| /* define this if you have LCD enable function */ |
| #define HAVE_LCD_ENABLE |
| |
| /* define this if you have an i.MX23 codec */ |
| #define HAVE_IMX233_CODEC |
| |
| /* Define this if you have a speaker */ |
| #define HAVE_SPEAKER |
| |
| #define CONFIG_TUNER TEA5760 |
| |
| /* There is no hardware tone control */ |
| #define HAVE_SW_TONE_CONTROLS |
| |
| #define CONFIG_KEYPAD CREATIVE_ZEN_PAD |
| #define HAVE_HEADPHONE_DETECTION |
| |
| /* Define this to enable morse code input */ |
| #define HAVE_MORSE_INPUT |
| |
| /* Define this if you do software codec */ |
| #define CONFIG_CODEC SWCODEC |
| |
| /* LCD dimensions */ |
| #define LCD_WIDTH 320 |
| #define LCD_HEIGHT 240 |
| /* sqrt(320^2 + 240^2) / 2.5 = 160.0 */ |
| #define LCD_DPI 160 |
| #define LCD_DEPTH 24 /* 16M colours */ |
| #define LCD_PIXELFORMAT RGB888 /* rgb888 */ |
| |
| /* Define this if you have a software controlled poweroff */ |
| #define HAVE_SW_POWEROFF |
| |
| /* Some Sansa Fuzes seem to be FAT16 formatted */ |
| #define HAVE_FAT16SUPPORT |
| |
| /* The number of bytes reserved for loadable codecs */ |
| #define CODEC_SIZE 0x100000 |
| |
| /* The number of bytes reserved for loadable plugins */ |
| #define PLUGIN_BUFFER_SIZE 0x100000 |
| |
| #define AB_REPEAT_ENABLE |
| |
| /* Define this for LCD backlight available */ |
| #define HAVE_BACKLIGHT |
| #define HAVE_BACKLIGHT_BRIGHTNESS |
| |
| /* Main LCD backlight brightness range and defaults */ |
| #define MIN_BRIGHTNESS_SETTING 0 |
| #define MAX_BRIGHTNESS_SETTING 100 |
| #define DEFAULT_BRIGHTNESS_SETTING 50 |
| |
| /* Which backlight fading type? */ |
| #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING |
| |
| /* define this if you have a flash memory storage */ |
| #define HAVE_FLASH_STORAGE |
| |
| /* define this if the flash memory uses the SecureDigital Memory Card protocol */ |
| #define CONFIG_STORAGE STORAGE_SD |
| #define NUM_DRIVES 2 |
| #define HAVE_MULTIDRIVE |
| #define HAVE_MULTIVOLUME |
| #define HAVE_HOTSWAP |
| |
| /* todo */ |
| #define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */ |
| #define BATTERY_CAPACITY_MIN 550 /* min. capacity selectable */ |
| #define BATTERY_CAPACITY_MAX 550 /* max. capacity selectable */ |
| #define BATTERY_CAPACITY_INC 0 /* capacity increment */ |
| #define BATTERY_TYPES_COUNT 1 /* only one type */ |
| |
| #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE |
| |
| /* Charging implemented in a target-specific algorithm */ |
| #define CONFIG_CHARGING CHARGING_TARGET |
| |
| /* define this if the unit can be powered or charged via USB */ |
| #define HAVE_USB_POWER |
| |
| /* Define this if you have an IMX233*/ |
| #define CONFIG_CPU IMX233 |
| |
| /* Define this if you want to use the IMX233 i2c interface */ |
| #define CONFIG_I2C I2C_IMX233 |
| |
| /* define current usage levels (based on battery bench) */ |
| #define CURRENT_NORMAL 35 |
| #define CURRENT_BACKLIGHT 30 |
| #define CURRENT_RECORD CURRENT_NORMAL |
| |
| /* maximum charging current */ |
| #define CURRENT_MAX_CHG 200 |
| |
| /* Define this to the CPU frequency */ |
| #define CPU_FREQ 454000000 |
| |
| /* Type of LCD */ |
| #define CONFIG_LCD LCD_CREATIVEZEN |
| |
| /* Offset ( in the firmware file's header ) to the file CRC and data. These are |
| only used when loading the old format rockbox.e200 file */ |
| #define FIRMWARE_OFFSET_FILE_CRC 0x0 |
| #define FIRMWARE_OFFSET_FILE_DATA 0x8 |
| |
| /* USB On-the-go */ |
| #define CONFIG_USBOTG USBOTG_ARC |
| |
| /* enable these for the experimental usb stack */ |
| #define HAVE_USBSTACK |
| //#define USB_HANDLED_BY_OF |
| #define USB_VENDOR_ID 0x041e |
| #define USB_PRODUCT_ID 0x4162 |
| #define HAVE_USB_HID_MOUSE |
| #define HAVE_BOOTLOADER_USB_MODE |
| |
| /* Define this if you have adjustable CPU frequency */ |
| #define HAVE_ADJUSTABLE_CPU_FREQ |
| |
| #define BOOTFILE_EXT "creative" |
| #define BOOTFILE "rockbox." BOOTFILE_EXT |
| #define BOOTDIR "/.rockbox" |
| |
| #define INCLUDE_TIMEOUT_API |
| |