| /*************************************************************************** |
| * __________ __ ___. |
| * Open \______ \ ____ ____ | | _\_ |__ _______ ___ |
| * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / |
| * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < |
| * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ |
| * \/ \/ \/ \/ \/ |
| * $Id$ |
| * |
| * Copyright (C) 2002 by Linus Nielsen Feltzing |
| * |
| * All files in this archive are subject to the GNU General Public License. |
| * See the file COPYING in the source tree root for full license agreement. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ****************************************************************************/ |
| #include "config.h" |
| #include "cpu.h" |
| #include "kernel.h" |
| #include "thread.h" |
| #include "system.h" |
| #include "debug.h" |
| #include "ata.h" |
| #include "fat.h" |
| #include "disk.h" |
| #include "panic.h" |
| #include "lcd.h" |
| #include "adc.h" |
| #include "usb.h" |
| #include "button.h" |
| #include "sprintf.h" |
| #include "hwcompat.h" |
| #ifdef HAVE_MMC |
| #include "ata_mmc.h" |
| #endif |
| |
| extern void dbg_ports(void); /* NASTY! defined in apps/ */ |
| |
| #ifdef HAVE_LCD_BITMAP |
| bool do_screendump_instead_of_usb = false; |
| void screen_dump(void); /* Nasty again. Defined in apps/ too */ |
| #endif |
| |
| #define USB_REALLY_BRAVE |
| |
| #if !defined(SIMULATOR) && !defined(USB_NONE) |
| |
| /* Messages from usb_tick and thread states */ |
| #define USB_INSERTED 1 |
| #define USB_EXTRACTED 2 |
| #ifdef HAVE_MMC |
| #define USB_REENABLE 3 |
| #endif |
| #ifdef HAVE_USB_POWER |
| #define USB_POWERED 4 |
| |
| #if CONFIG_KEYPAD == RECORDER_PAD |
| #define USBPOWER_BUTTON BUTTON_F1 |
| #elif CONFIG_KEYPAD == ONDIO_PAD |
| #define USBPOWER_BUTTON BUTTON_MENU |
| #endif |
| #endif /* HAVE_USB_POWER */ |
| |
| /* The ADC tick reads one channel per tick, and we want to check 3 successive |
| readings on the USB voltage channel. This doesn't apply to the Player, but |
| debouncing the USB detection port won't hurt us either. */ |
| #define NUM_POLL_READINGS (NUM_ADC_CHANNELS * 3) |
| static int countdown; |
| |
| static int usb_state; |
| |
| #ifdef HAVE_MMC |
| static int usb_mmc_countdown = 0; |
| #endif |
| |
| /* FIXME: The extra 0x800 is consumed by fat_mount() when the fsinfo |
| needs updating */ |
| static long usb_stack[(DEFAULT_STACK_SIZE + 0x800)/sizeof(long)]; |
| static const char usb_thread_name[] = "usb"; |
| static struct event_queue usb_queue; |
| static bool last_usb_status; |
| static bool usb_monitor_enabled; |
| |
| |
| static void usb_enable(bool on) |
| { |
| #ifdef USB_ENABLE_ONDIOSTYLE |
| PACR2 &= ~0x04C0; /* use PA3, PA5 as GPIO */ |
| if(on) |
| { |
| #ifdef HAVE_MMC |
| mmc_enable_int_flash_clock(!mmc_detect()); |
| #endif |
| if (!(read_hw_mask() & MMC_CLOCK_POLARITY)) |
| and_b(~0x20, &PBDRH); /* old circuit needs SCK1 = low while on USB */ |
| or_b(0x20, &PADRL); /* enable USB */ |
| and_b(~0x08, &PADRL); /* assert card detect */ |
| } |
| else |
| { |
| if (!(read_hw_mask() & MMC_CLOCK_POLARITY)) |
| or_b(0x20, &PBDRH); /* reset SCK1 = high for old circuit */ |
| and_b(~0x20, &PADRL); /* disable USB */ |
| or_b(0x08, &PADRL); /* deassert card detect */ |
| } |
| or_b(0x28, &PAIORL); /* output for USB enable and card detect */ |
| #elif defined(USB_GMINISTYLE) |
| { |
| int smsc_ver = smsc_version(); |
| if (on) { |
| if (smsc_ver < 4) { |
| P6 &= ~0x04; |
| P10 &= ~0x20; |
| |
| smsc_delay(); |
| |
| P6 |= 0x08; |
| P10 |= 0x20; |
| |
| smsc_delay(); |
| } |
| P6 |= 0x10; |
| } else { |
| P6 &= ~0x10; |
| if (smsc_ver < 4) { |
| P6 &= ~0x04; |
| P10 &= ~0x20; |
| } |
| } |
| } |
| #elif defined(USB_IRIVERSTYLE) |
| if(on) |
| { |
| /* Power on the Cypress chip */ |
| or_l(0x01000000, &GPIO_OUT); |
| sleep(2); |
| } |
| else |
| { |
| /* Power off the Cypress chip */ |
| and_l(~0x01000000, &GPIO_OUT); |
| } |
| |
| #else |
| #ifdef HAVE_LCD_BITMAP |
| if(read_hw_mask() & USB_ACTIVE_HIGH) |
| on = !on; |
| #endif |
| if(on) |
| { |
| and_b(~0x04, &PADRH); /* enable USB */ |
| } |
| else |
| { |
| or_b(0x04, &PADRH); |
| } |
| or_b(0x04, &PAIORH); |
| #endif |
| } |
| |
| static void usb_slave_mode(bool on) |
| { |
| int rc; |
| |
| if(on) |
| { |
| DEBUGF("Entering USB slave mode\n"); |
| ata_soft_reset(); |
| ata_init(); |
| ata_standby(15); |
| ata_enable(false); |
| usb_enable(true); |
| } |
| else |
| { |
| DEBUGF("Leaving USB slave mode\n"); |
| |
| /* Let the ISDx00 settle */ |
| sleep(HZ*1); |
| |
| usb_enable(false); |
| |
| rc = ata_init(); |
| if(rc) |
| { |
| /* fixme: can we remove this? (already such in main.c) */ |
| char str[32]; |
| lcd_clear_display(); |
| snprintf(str, 31, "ATA error: %d", rc); |
| lcd_puts(0, 0, str); |
| lcd_puts(0, 1, "Press ON to debug"); |
| lcd_update(); |
| while(!(button_get(true) & BUTTON_REL)) {}; |
| dbg_ports(); |
| panicf("ata: %d",rc); |
| } |
| |
| rc = disk_mount_all(); |
| if (rc <= 0) /* no partition */ |
| panicf("mount: %d",rc); |
| |
| } |
| } |
| |
| static void usb_thread(void) |
| { |
| int num_acks_to_expect = -1; |
| bool waiting_for_ack; |
| struct event ev; |
| |
| waiting_for_ack = false; |
| |
| while(1) |
| { |
| queue_wait(&usb_queue, &ev); |
| switch(ev.id) |
| { |
| case USB_INSERTED: |
| #ifdef HAVE_LCD_BITMAP |
| if(do_screendump_instead_of_usb) |
| { |
| screen_dump(); |
| } |
| else |
| #endif |
| #ifdef HAVE_USB_POWER |
| if(button_status() == USBPOWER_BUTTON) |
| { |
| usb_state = USB_POWERED; |
| } |
| else |
| #endif |
| { |
| /* Tell all threads that they have to back off the ATA. |
| We subtract one for our own thread. */ |
| num_acks_to_expect = |
| queue_broadcast(SYS_USB_CONNECTED, NULL) - 1; |
| waiting_for_ack = true; |
| DEBUGF("USB inserted. Waiting for ack from %d threads...\n", |
| num_acks_to_expect); |
| } |
| break; |
| |
| case SYS_USB_CONNECTED_ACK: |
| if(waiting_for_ack) |
| { |
| num_acks_to_expect--; |
| if(num_acks_to_expect == 0) |
| { |
| DEBUGF("All threads have acknowledged the connect.\n"); |
| #ifdef USB_REALLY_BRAVE |
| usb_slave_mode(true); |
| usb_state = USB_INSERTED; |
| cpu_idle_mode(true); |
| #else |
| system_reboot(); |
| #endif |
| } |
| else |
| { |
| DEBUGF("usb: got ack, %d to go...\n", |
| num_acks_to_expect); |
| } |
| } |
| break; |
| |
| case USB_EXTRACTED: |
| #ifdef HAVE_LCD_BITMAP |
| if(do_screendump_instead_of_usb) |
| break; |
| #endif |
| #ifdef HAVE_USB_POWER |
| if(usb_state == USB_POWERED) |
| { |
| usb_state = USB_EXTRACTED; |
| break; |
| } |
| #endif |
| if(usb_state == USB_INSERTED) |
| { |
| /* Only disable the USB mode if we really have enabled it |
| some threads might not have acknowledged the |
| insertion */ |
| usb_slave_mode(false); |
| cpu_idle_mode(false); |
| } |
| |
| usb_state = USB_EXTRACTED; |
| |
| /* Tell all threads that we are back in business */ |
| num_acks_to_expect = |
| queue_broadcast(SYS_USB_DISCONNECTED, NULL) - 1; |
| waiting_for_ack = true; |
| DEBUGF("USB extracted. Waiting for ack from %d threads...\n", |
| num_acks_to_expect); |
| #ifdef HAVE_LCD_CHARCELLS |
| lcd_icon(ICON_USB, false); |
| #endif |
| break; |
| |
| case SYS_USB_DISCONNECTED_ACK: |
| if(waiting_for_ack) |
| { |
| num_acks_to_expect--; |
| if(num_acks_to_expect == 0) |
| { |
| DEBUGF("All threads have acknowledged. " |
| "We're in business.\n"); |
| } |
| else |
| { |
| DEBUGF("usb: got ack, %d to go...\n", |
| num_acks_to_expect); |
| } |
| } |
| break; |
| |
| #ifdef HAVE_MMC |
| case SYS_MMC_INSERTED: |
| case SYS_MMC_EXTRACTED: |
| if(usb_state == USB_INSERTED) |
| { |
| usb_enable(false); |
| usb_mmc_countdown = HZ/2; /* re-enable after 0.5 sec */ |
| } |
| break; |
| |
| case USB_REENABLE: |
| if(usb_state == USB_INSERTED) |
| usb_enable(true); /* reenable only if still inserted */ |
| break; |
| #endif |
| } |
| } |
| } |
| |
| bool usb_detect(void) |
| { |
| bool current_status; |
| |
| #ifdef USB_RECORDERSTYLE |
| current_status = (adc_read(ADC_USB_POWER) > 500)?true:false; |
| #endif |
| #ifdef USB_FMRECORDERSTYLE |
| current_status = (adc_read(ADC_USB_POWER) <= 512)?true:false; |
| #endif |
| #ifdef USB_PLAYERSTYLE |
| current_status = (PADR & 0x8000)?false:true; |
| #endif |
| #ifdef USB_IRIVERSTYLE |
| current_status = (GPIO1_READ & 0x80)?true:false; |
| #endif |
| #ifdef USB_GMINISTYLE |
| current_status = (P5 & 0x10)?true:false; |
| #endif |
| #ifdef IRIVER_H300 |
| /* TODO: add proper code code for H300 USB style */ |
| current_status = false; |
| #endif |
| |
| return current_status; |
| } |
| |
| |
| static void usb_tick(void) |
| { |
| bool current_status; |
| |
| #ifdef USB_GMINISTYLE |
| /* Keep usb chip in usb state (?) */ |
| if (P5 & 0x10) { |
| if ((P10 & 0x20) == 0 || (P6 & 0x08) == 0) { |
| if (smsc_version() < 4) { |
| P6 |= 0x08; |
| P10 |= 0x20; |
| } |
| } |
| } |
| #endif |
| |
| if(usb_monitor_enabled) |
| { |
| current_status = usb_detect(); |
| |
| /* Only report when the status has changed */ |
| if(current_status != last_usb_status) |
| { |
| last_usb_status = current_status; |
| countdown = NUM_POLL_READINGS; |
| } |
| else |
| { |
| /* Count down until it gets negative */ |
| if(countdown >= 0) |
| countdown--; |
| |
| /* Report to the thread if we have had 3 identical status |
| readings in a row */ |
| if(countdown == 0) |
| { |
| if(current_status) |
| queue_post(&usb_queue, USB_INSERTED, NULL); |
| else |
| queue_post(&usb_queue, USB_EXTRACTED, NULL); |
| } |
| } |
| } |
| #ifdef HAVE_MMC |
| if(usb_mmc_countdown > 0) |
| { |
| usb_mmc_countdown--; |
| if (usb_mmc_countdown == 0) |
| queue_post(&usb_queue, USB_REENABLE, NULL); |
| } |
| #endif |
| } |
| |
| void usb_acknowledge(long id) |
| { |
| queue_post(&usb_queue, id, NULL); |
| } |
| |
| void usb_init(void) |
| { |
| usb_state = USB_EXTRACTED; |
| usb_monitor_enabled = false; |
| countdown = -1; |
| |
| #ifdef USB_IRIVERSTYLE |
| and_l(~0x01000000, &GPIO_OUT); /* GPIO24 is the Cypress chip power */ |
| or_l(0x01000000, &GPIO_ENABLE); |
| or_l(0x01000000, &GPIO_FUNCTION); |
| |
| or_l(0x00000080, &GPIO1_FUNCTION); /* GPIO39 is the USB detect input */ |
| #endif |
| |
| usb_enable(false); |
| |
| /* We assume that the USB cable is extracted */ |
| last_usb_status = false; |
| |
| queue_init(&usb_queue); |
| create_thread(usb_thread, usb_stack, sizeof(usb_stack), usb_thread_name); |
| |
| tick_add_task(usb_tick); |
| } |
| |
| void usb_wait_for_disconnect(struct event_queue *q) |
| { |
| struct event ev; |
| |
| /* Don't return until we get SYS_USB_DISCONNECTED */ |
| while(1) |
| { |
| queue_wait(q, &ev); |
| if(ev.id == SYS_USB_DISCONNECTED) |
| { |
| usb_acknowledge(SYS_USB_DISCONNECTED_ACK); |
| return; |
| } |
| } |
| } |
| |
| int usb_wait_for_disconnect_w_tmo(struct event_queue *q, int ticks) |
| { |
| struct event ev; |
| |
| /* Don't return until we get SYS_USB_DISCONNECTED or SYS_TIMEOUT */ |
| while(1) |
| { |
| queue_wait_w_tmo(q, &ev, ticks); |
| switch(ev.id) |
| { |
| case SYS_USB_DISCONNECTED: |
| usb_acknowledge(SYS_USB_DISCONNECTED_ACK); |
| return 0; |
| break; |
| case SYS_TIMEOUT: |
| return 1; |
| break; |
| } |
| } |
| } |
| |
| void usb_start_monitoring(void) |
| { |
| usb_monitor_enabled = true; |
| } |
| |
| bool usb_inserted(void) |
| { |
| return usb_state == USB_INSERTED; |
| } |
| |
| #ifdef HAVE_USB_POWER |
| bool usb_powered(void) |
| { |
| return usb_state == USB_POWERED; |
| } |
| #endif |
| |
| #else |
| |
| #ifdef USB_NONE |
| bool usb_inserted(void) |
| { |
| return false; |
| } |
| #endif |
| |
| /* Dummy simulator functions */ |
| void usb_acknowledge(long id) |
| { |
| id = id; |
| } |
| |
| void usb_init(void) |
| { |
| } |
| |
| void usb_start_monitoring(void) |
| { |
| } |
| |
| bool usb_detect(void) |
| { |
| return false; |
| } |
| |
| #endif /* USB_NONE or SIMULATOR */ |