| /*************************************************************************** |
| * __________ __ ___. |
| * Open \______ \ ____ ____ | | _\_ |__ _______ ___ |
| * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / |
| * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < |
| * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ |
| * \/ \/ \/ \/ \/ |
| * $Id$ |
| * |
| * Copyright (C) 2008 by Maurus Cuelenaere |
| * |
| * based on tcctool.c by Dave Chapman |
| * |
| * USB code based on ifp-line - http://ifp-driver.sourceforge.net |
| * |
| * ifp-line is (C) Pavel Kriz, Jun Yamishiro and Joe Roback and |
| * licensed under the GPL (v2) |
| * |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ****************************************************************************/ |
| |
| #include <stdio.h> |
| #include <inttypes.h> |
| #include <usb.h> |
| #include <string.h> |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <stdbool.h> |
| #include <unistd.h> |
| #include "jz4740.h" |
| #include "jz_xloader.h" |
| |
| #define VERSION "0.4" |
| |
| #define MAX_FIRMWARESIZE (64*1024*1024) /* Arbitrary limit (for safety) */ |
| |
| /* For win32 compatibility: */ |
| #ifndef O_BINARY |
| #define O_BINARY 0 |
| #endif |
| |
| /* USB IDs for USB Boot Mode */ |
| #define VID 0x601A |
| #define PID 0x4740 |
| |
| #define EP_BULK_TO 0x01 |
| #define TOUT 5000 |
| |
| enum USB_JZ4740_REQUEST |
| { |
| VR_GET_CPU_INFO = 0, |
| VR_SET_DATA_ADDRESS, |
| VR_SET_DATA_LENGTH, |
| VR_FLUSH_CACHES, |
| VR_PROGRAM_START1, |
| VR_PROGRAM_START2, |
| VR_NOR_OPS, |
| VR_NAND_OPS, |
| VR_SDRAM_OPS, |
| VR_CONFIGURATION |
| }; |
| |
| enum NOR_OPS_TYPE |
| { |
| NOR_INIT = 0, |
| NOR_QUERY, |
| NOR_WRITE, |
| NOR_ERASE_CHIP, |
| NOR_ERASE_SECTOR |
| }; |
| |
| enum NOR_FLASH_TYPE |
| { |
| NOR_AM29 = 0, |
| NOR_SST28, |
| NOR_SST39x16, |
| NOR_SST39x8 |
| }; |
| |
| enum NAND_OPS_TYPE |
| { |
| NAND_QUERY = 0, |
| NAND_INIT, |
| NAND_MARK_BAD, |
| NAND_READ_OOB, |
| NAND_READ_RAW, |
| NAND_ERASE, |
| NAND_READ, |
| NAND_PROGRAM, |
| NAND_READ_TO_RAM |
| }; |
| |
| enum SDRAM_OPS_TYPE |
| { |
| SDRAM_LOAD, |
| }; |
| |
| enum DATA_STRUCTURE_OB |
| { |
| DS_flash_info, |
| DS_hand |
| }; |
| |
| enum OPTION |
| { |
| OOB_ECC, |
| OOB_NO_ECC, |
| NO_OOB, |
| }; |
| |
| int filesize(FILE* fd) |
| { |
| int ret; |
| |
| fseek(fd, 0, SEEK_END); |
| ret = ftell(fd); |
| fseek(fd, 0, SEEK_SET); |
| |
| return ret; |
| } |
| |
| bool file_exists(const char* filename) |
| { |
| FILE* fp = fopen(filename, "r"); |
| |
| if(fp) |
| { |
| fclose(fp); |
| return true; |
| } |
| else |
| return false; |
| } |
| |
| |
| #define SEND_COMMAND(cmd, arg) err = usb_control_msg(dh, USB_ENDPOINT_OUT | USB_TYPE_VENDOR, (cmd), (arg)>>16, (arg)&0xFFFF, NULL, 0, TOUT);\ |
| if (err < 0) \ |
| { \ |
| fprintf(stderr,"\n[ERR] Error sending control message (%d, %s)\n", err, usb_strerror()); \ |
| return -1; \ |
| } |
| |
| #define GET_CPU_INFO(s) err = usb_control_msg(dh, USB_ENDPOINT_IN | USB_TYPE_VENDOR, VR_GET_CPU_INFO, 0, 0, (s), 8, TOUT); \ |
| if (err < 0) \ |
| { \ |
| fprintf(stderr,"\n[ERR] Error sending control message (%d, %s)\n", err, usb_strerror()); \ |
| return -1; \ |
| } |
| |
| #define SEND_DATA(ptr, size) err = usb_bulk_write(dh, USB_ENDPOINT_OUT | EP_BULK_TO, ((char*)(ptr)), (size), TOUT); \ |
| if (err != (size)) \ |
| { \ |
| fprintf(stderr,"\n[ERR] Error writing data\n"); \ |
| fprintf(stderr,"[ERR] Bulk write error (%d, %s)\n", err, strerror(-err)); \ |
| return -1; \ |
| } |
| |
| #define GET_DATA(ptr, size) err = usb_bulk_read(dh, USB_ENDPOINT_IN | EP_BULK_TO, ((char*)(ptr)), (size), TOUT); \ |
| if (err != (size)) \ |
| { \ |
| fprintf(stderr,"\n[ERR] Error writing data\n"); \ |
| fprintf(stderr,"[ERR] Bulk write error (%d, %s)\n", err, strerror(-err)); \ |
| return -1; \ |
| } |
| int upload_data(usb_dev_handle* dh, int address, unsigned char* p, int len) |
| { |
| int err; |
| char buf[9]; |
| unsigned char* tmp_buf; |
| |
| fprintf(stderr, "[INFO] GET_CPU_INFO: "); |
| GET_CPU_INFO(buf); |
| buf[8] = 0; |
| fprintf(stderr, "%s\n", buf); |
| |
| fprintf(stderr, "[INFO] SET_DATA_ADDRESS to 0x%x...", address); |
| SEND_COMMAND(VR_SET_DATA_ADDRESS, address); |
| fprintf(stderr, " Done!\n"); |
| |
| fprintf(stderr, "[INFO] Sending data..."); |
| /* Must not split the file in several packages! */ |
| SEND_DATA(p, len); |
| fprintf(stderr, " Done!\n"); |
| |
| fprintf(stderr, "[INFO] Verifying data..."); |
| SEND_COMMAND(VR_SET_DATA_ADDRESS, address); |
| SEND_COMMAND(VR_SET_DATA_LENGTH, len); |
| tmp_buf = malloc(len); |
| if (tmp_buf == NULL) |
| { |
| fprintf(stderr, "\n[ERR] Could not allocate memory.\n"); |
| return -1; |
| } |
| GET_DATA(tmp_buf, len); |
| if (memcmp(tmp_buf, p, len) != 0) |
| fprintf(stderr, "\n[WARN] Sent data isn't the same as received data...\n"); |
| else |
| fprintf(stderr, " Done!\n"); |
| free(tmp_buf); |
| |
| return 0; |
| } |
| |
| int boot(usb_dev_handle* dh, int address, bool stage2) |
| { |
| int err; |
| |
| fprintf(stderr, "[INFO] Booting device STAGE%d...", (stage2 ? 2 : 1)); |
| SEND_COMMAND((stage2 ? VR_PROGRAM_START2 : VR_PROGRAM_START1), address ); |
| fprintf(stderr, " Done!\n"); |
| |
| return err; |
| } |
| |
| int upload_app(usb_dev_handle* dh, int address, unsigned char* p, int len, bool stage2) |
| { |
| int err = upload_data(dh, address, p, len); |
| if(err == 0) |
| { |
| err = boot(dh, address, stage2); |
| if(err == 0) |
| fprintf(stderr, "[INFO] Done!\n"); |
| } |
| |
| return err; |
| } |
| |
| int read_data(usb_dev_handle* dh, int address, unsigned char *p, int len) |
| { |
| int err; |
| char buf[9]; |
| |
| fprintf(stderr, "[INFO] GET_CPU_INFO: "); |
| GET_CPU_INFO(buf); |
| buf[8] = 0; |
| fprintf(stderr, "%s\n", buf); |
| |
| fprintf(stderr, "[INFO] Reading data..."); |
| SEND_COMMAND(VR_SET_DATA_ADDRESS, address); |
| SEND_COMMAND(VR_SET_DATA_LENGTH, len); |
| GET_DATA(p, len); |
| fprintf(stderr, " Done!\n"); |
| return 0; |
| } |
| |
| unsigned int read_reg(usb_dev_handle* dh, int address, int size) |
| { |
| int err; /* set by SEND_COMMAND macro */ |
| unsigned char buf[4]; |
| |
| SEND_COMMAND(VR_SET_DATA_ADDRESS, address); |
| SEND_COMMAND(VR_SET_DATA_LENGTH, size); |
| GET_DATA(buf, size); |
| |
| if(size == 1) |
| return buf[0]; |
| else if(size == 2) |
| return (buf[1] << 8) | buf[0]; |
| else if(size == 4) |
| return (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0]; |
| else |
| return 0; |
| } |
| |
| int set_reg(usb_dev_handle* dh, int address, unsigned int val, int size) |
| { |
| int err; /* set by SEND_COMMAND macro */ |
| unsigned char buf[4]; |
| |
| buf[0] = val & 0xff; |
| if(size > 1) |
| { |
| buf[1] = (val >> 8) & 0xff; |
| if(size > 2) |
| { |
| buf[2] = (val >> 16) & 0xff; |
| buf[3] = (val >> 24) & 0xff; |
| } |
| } |
| |
| SEND_COMMAND(VR_SET_DATA_ADDRESS, address); |
| SEND_DATA(buf, size); |
| |
| return 0; |
| } |
| #define or_reg(dh, adr, val, size) set_reg(dh, adr, (read_reg(dh, adr, size) | (val)), size); |
| #define and_reg(dh, adr, val, size) set_reg(dh, adr, (read_reg(dh, adr, size) & (val)), size); |
| #define bc_reg(dh, adr, val, size) set_reg(dh, adr, (read_reg(dh, adr, size) & ~(val)), size); |
| #define xor_reg(dh, adr, val, size) set_reg(dh, adr, (read_reg(dh, adr, size) ^ (val)), size); |
| |
| #define TEST(m, size) fprintf(stderr, "%s -> %x\n", #m, read_reg(dh, m, size)); |
| int test_device(usb_dev_handle* dh) |
| { |
| TEST(INTC_ISR, 4); |
| TEST(INTC_IMR, 4); |
| TEST(INTC_IMSR, 4); |
| TEST(INTC_IMCR, 4); |
| TEST(INTC_IPR, 4); |
| |
| fprintf(stderr, "\n"); |
| TEST(RTC_RCR, 4); |
| TEST(RTC_RSR, 4); |
| TEST(RTC_RSAR, 4); |
| TEST(RTC_RGR, 4); |
| TEST(RTC_HCR, 4); |
| TEST(RTC_RCR, 4); |
| TEST(RTC_HWFCR, 4); |
| TEST(RTC_HRCR, 4); |
| TEST(RTC_HWCR, 4); |
| TEST(RTC_HWSR, 4); |
| |
| fprintf(stderr, "\n"); |
| TEST(GPIO_PXPIN(0), 4); |
| TEST(GPIO_PXPIN(1), 4); |
| TEST(GPIO_PXPIN(2), 4); |
| TEST(GPIO_PXPIN(3), 4); |
| |
| fprintf(stderr, "\n"); |
| TEST(CPM_CLKGR, 4); |
| |
| fprintf(stderr, "\n"); |
| TEST(SADC_ENA, 1); |
| TEST(SADC_CTRL, 1); |
| TEST(SADC_TSDAT, 4); |
| TEST(SADC_BATDAT, 2); |
| TEST(SADC_STATE, 1); |
| |
| fprintf(stderr, "\n"); |
| |
| TEST(SLCD_CFG, 4); |
| TEST(SLCD_CTRL, 1); |
| TEST(SLCD_STATE, 1); |
| |
| return 0; |
| } |
| |
| unsigned int read_file(const char *name, unsigned char **buffer) |
| { |
| FILE *fd; |
| int len, n; |
| |
| fd = fopen(name, "rb"); |
| if (fd == NULL) |
| { |
| fprintf(stderr, "[ERR] Could not open %s\n", name); |
| return 0; |
| } |
| |
| len = filesize(fd); |
| |
| *buffer = (unsigned char*)malloc(len); |
| if (*buffer == NULL) |
| { |
| fprintf(stderr, "[ERR] Could not allocate memory.\n"); |
| fclose(fd); |
| return 0; |
| } |
| |
| n = fread(*buffer, 1, len, fd); |
| if (n != len) |
| { |
| fprintf(stderr, "[ERR] Short read.\n"); |
| fclose(fd); |
| return 0; |
| } |
| fclose(fd); |
| |
| return len; |
| } |
| #define _GET_CPU fprintf(stderr, "[INFO] GET_CPU_INFO:"); \ |
| GET_CPU_INFO(cpu); \ |
| cpu[8] = 0; \ |
| fprintf(stderr, " %s\n", cpu); |
| #define _SET_ADDR(a) fprintf(stderr, "[INFO] Set address to 0x%x...", a); \ |
| SEND_COMMAND(VR_SET_DATA_ADDRESS, a); \ |
| fprintf(stderr, " Done!\n"); |
| #define _SEND_FILE(a) fsize = read_file(a, &buffer); \ |
| if(fsize == 0) \ |
| return -1; \ |
| fprintf(stderr, "[INFO] Sending file %s: %d bytes...", a, fsize); \ |
| SEND_DATA(buffer, fsize); \ |
| free(buffer); \ |
| fprintf(stderr, " Done!\n"); |
| #define _VERIFY_DATA(a,c) fprintf(stderr, "[INFO] Verifying data (%s)...", a); \ |
| fsize = read_file(a, &buffer); \ |
| if(fsize == 0) \ |
| return -1; \ |
| buffer2 = (unsigned char*)malloc(fsize); \ |
| SEND_COMMAND(VR_SET_DATA_ADDRESS, c); \ |
| SEND_COMMAND(VR_SET_DATA_LENGTH, fsize); \ |
| GET_DATA(buffer2, fsize); \ |
| if(memcmp(buffer, buffer2, fsize) != 0) \ |
| fprintf(stderr, "\n[WARN] Sent data isn't the same as received data...\n"); \ |
| else \ |
| fprintf(stderr, " Done!\n"); \ |
| free(buffer); \ |
| free(buffer2); |
| #define _STAGE1(a) fprintf(stderr, "[INFO] Stage 1 at 0x%x\n", a); \ |
| SEND_COMMAND(VR_PROGRAM_START1, a); |
| #define _STAGE2(a) fprintf(stderr, "[INFO] Stage 2 at 0x%x\n", a); \ |
| SEND_COMMAND(VR_PROGRAM_START2, a); |
| #define _FLUSH fprintf(stderr, "[INFO] Flushing caches...\n"); \ |
| SEND_COMMAND(VR_FLUSH_CACHES, 0); |
| #ifdef _WIN32 |
| #define _SLEEP(x) Sleep(x*1000); |
| #else |
| #define _SLEEP(x) sleep(x); |
| #endif |
| int mimic_of(usb_dev_handle *dh, bool vx767) |
| { |
| int err, fsize; |
| unsigned char *buffer, *buffer2; |
| char cpu[9]; |
| |
| fprintf(stderr, "[INFO] Start!\n"); |
| _GET_CPU; |
| _SET_ADDR(0x8000 << 16); |
| _SEND_FILE("1.bin"); |
| _GET_CPU; |
| _VERIFY_DATA("1.bin", 0x8000 << 16); |
| _STAGE1(0x8000 << 16); |
| _SLEEP(3); |
| _VERIFY_DATA("2.bin", 0xB3020060); |
| _GET_CPU; |
| _GET_CPU; |
| _FLUSH; |
| _GET_CPU; |
| _GET_CPU; |
| _SET_ADDR(0x8000 << 16); |
| _SEND_FILE("3.bin"); |
| _GET_CPU; |
| _VERIFY_DATA("3.bin", 0x8000 << 16); |
| _GET_CPU; |
| _FLUSH; |
| _GET_CPU; |
| _GET_CPU; |
| _SET_ADDR(0x80D0 << 16); |
| _SEND_FILE("4.bin"); |
| _GET_CPU; |
| _VERIFY_DATA("4.bin", 0x80D0 << 16); |
| _GET_CPU; |
| _FLUSH; |
| _GET_CPU; |
| _GET_CPU; |
| _SET_ADDR(0x80E0 << 16); |
| _SEND_FILE("5.bin"); |
| _GET_CPU; |
| _VERIFY_DATA("5.bin", 0x80E0 << 16); |
| _GET_CPU; |
| _FLUSH; |
| _GET_CPU; |
| _GET_CPU; |
| _SET_ADDR(0x80004000); |
| _SEND_FILE("6.bin"); |
| _GET_CPU; |
| _VERIFY_DATA("6.bin", 0x80004000); |
| _GET_CPU; |
| _FLUSH; |
| _GET_CPU; |
| _GET_CPU; |
| _SET_ADDR(0x80FD << 16); |
| _SEND_FILE("7.bin"); |
| _GET_CPU; |
| _VERIFY_DATA("7.bin", 0x80FD << 16); |
| _GET_CPU; |
| _FLUSH; |
| _GET_CPU; |
| _STAGE2(0x80FD0004); |
| _VERIFY_DATA("8.bin", 0x80004004); |
| _VERIFY_DATA("9.bin", 0x80004008); |
| _SLEEP(2); |
| _GET_CPU; |
| _SET_ADDR(0x80E0 << 16); |
| _SEND_FILE("10.bin"); |
| _GET_CPU; |
| _VERIFY_DATA("10.bin", 0x80E0 << 16); |
| _GET_CPU; |
| _FLUSH; |
| _GET_CPU; |
| if(vx767) |
| { |
| _STAGE2(0x80E10008); |
| } |
| else |
| { |
| _STAGE2(0x80E00008); |
| } |
| fprintf(stderr, "[INFO] Done!\n"); |
| return 0; |
| } |
| |
| int send_rockbox(usb_dev_handle *dh, const char* filename) |
| { |
| int fsize; |
| unsigned char *buffer; |
| |
| fprintf(stderr, "[INFO] Start!\n"); |
| if(file_exists("jz_xloader.bin")) |
| { |
| fprintf(stderr, "[INFO] Using jz_xloader.bin\n"); |
| fsize = read_file("jz_xloader.bin", &buffer); |
| upload_data(dh, 0x080000000, buffer, fsize); |
| free(buffer); |
| } |
| else |
| { |
| fprintf(stderr, "[INFO] Using built-in jz_xloader.bin\n"); |
| upload_data(dh, 0x080000000, jz_xloader, LEN_jz_xloader); |
| } |
| boot(dh, 0x080000000, false); |
| _SLEEP(1); |
| |
| fsize = read_file(filename, &buffer); |
| upload_data(dh, 0x080004000, buffer, fsize); |
| free(buffer); |
| boot(dh, 0x080004000, true); |
| |
| fprintf(stderr, "[INFO] Done!\n"); |
| |
| return 0; |
| } |
| |
| #define SEND_NAND_COMMAND(cs, cmd, option) SEND_COMMAND(VR_NAND_OPS, ((cmd&0xF)|((cs&0xFF)<<4)|((option&0xFF)<<12)) ); |
| #define LENGTH 1024*1024*5 |
| int nand_dump(usb_dev_handle *dh) |
| { |
| int err; |
| unsigned int n; |
| FILE *fd; |
| unsigned char* buffer; |
| |
| fd = fopen("nand_dump.bin", "wb"); |
| if (fd == NULL) |
| { |
| fprintf(stderr, "[ERR] Could not open nand_dump.bin\n"); |
| return 0; |
| } |
| |
| buffer = (unsigned char*)malloc(LENGTH); |
| if (buffer == NULL) |
| { |
| fprintf(stderr, "[ERR] Could not allocate memory.\n"); |
| fclose(fd); |
| return 0; |
| } |
| |
| SEND_NAND_COMMAND(0, NAND_INIT, 0); |
| /* |
| fprintf(stderr, "[INFO] Querying NAND...\n"); |
| SEND_NAND_COMMAND(0, NAND_QUERY, 0); |
| GET_DATA(buffer, 4); |
| printf("[INFO] %x %x %x %x\n", buffer[0], buffer[1], buffer[2], buffer[3]); |
| */ |
| SEND_COMMAND(VR_SET_DATA_ADDRESS, 0); |
| SEND_COMMAND(VR_SET_DATA_LENGTH, LENGTH); |
| SEND_NAND_COMMAND(0, NAND_READ, NO_OOB); |
| |
| fprintf(stderr, "[INFO] Reading data...\n"); |
| err = usb_bulk_read(dh, USB_ENDPOINT_IN | EP_BULK_TO, (char*)buffer, LENGTH, TOUT); |
| if (err != LENGTH) |
| { |
| fprintf(stderr,"\n[ERR] Error writing data\n"); |
| fprintf(stderr,"[ERR] Bulk write error (%d, %s)\n", err, strerror(-err)); |
| fclose(fd); |
| free(buffer); |
| return -1; |
| } |
| |
| n = fwrite(buffer, 1, LENGTH, fd); |
| if (n != LENGTH) |
| { |
| fprintf(stderr, "[ERR] Short write.\n"); |
| fclose(fd); |
| free(buffer); |
| return 0; |
| } |
| fclose(fd); |
| free(buffer); |
| |
| return n; |
| } |
| |
| #define ROM_LENGTH 0x1000*16 |
| int rom_dump(usb_dev_handle *dh) |
| { |
| int err; |
| unsigned int n; |
| FILE *fd; |
| unsigned char* buffer; |
| |
| fd = fopen("rom_dump.bin", "wb"); |
| if (fd == NULL) |
| { |
| fprintf(stderr, "[ERR] Could not open rom_dump.bin\n"); |
| return 0; |
| } |
| |
| buffer = (unsigned char*)malloc(ROM_LENGTH); |
| if (buffer == NULL) |
| { |
| fprintf(stderr, "[ERR] Could not allocate memory.\n"); |
| fclose(fd); |
| return 0; |
| } |
| |
| SEND_COMMAND(VR_SET_DATA_ADDRESS, 0x1FC00000); |
| SEND_COMMAND(VR_SET_DATA_LENGTH, ROM_LENGTH); |
| |
| fprintf(stderr, "[INFO] Reading data...\n"); |
| err = usb_bulk_read(dh, USB_ENDPOINT_IN | EP_BULK_TO, (char*)buffer, ROM_LENGTH, TOUT); |
| if (err != ROM_LENGTH) |
| { |
| fprintf(stderr,"\n[ERR] Error writing data\n"); |
| fprintf(stderr,"[ERR] Bulk write error (%d, %s)\n", err, strerror(-err)); |
| fclose(fd); |
| free(buffer); |
| return -1; |
| } |
| |
| n = fwrite(buffer, 1, ROM_LENGTH, fd); |
| if (n != ROM_LENGTH) |
| { |
| fprintf(stderr, "[ERR] Short write.\n"); |
| fclose(fd); |
| free(buffer); |
| return 0; |
| } |
| fclose(fd); |
| free(buffer); |
| |
| return n; |
| } |
| |
| int jzconnect(int address, unsigned char* buf, int len, int func) |
| { |
| struct usb_bus *bus; |
| struct usb_device *tmp_dev; |
| struct usb_device *dev = NULL; |
| usb_dev_handle *dh; |
| int err; |
| |
| fprintf(stderr,"[INFO] Searching for device...\n"); |
| |
| usb_init(); |
| if(usb_find_busses() < 0) |
| { |
| fprintf(stderr, "[ERR] Could not find any USB busses.\n"); |
| return -2; |
| } |
| |
| if (usb_find_devices() < 0) |
| { |
| fprintf(stderr, "[ERR] USB devices not found(nor hubs!).\n"); |
| return -3; |
| } |
| |
| for (bus = usb_get_busses(); bus; bus = bus->next) |
| { |
| for (tmp_dev = bus->devices; tmp_dev; tmp_dev = tmp_dev->next) |
| { |
| if (tmp_dev->descriptor.idVendor == VID && |
| tmp_dev->descriptor.idProduct == PID) |
| { |
| dev = tmp_dev; |
| goto found; |
| } |
| } |
| } |
| |
| fprintf(stderr, "[ERR] Device not found.\n"); |
| fprintf(stderr, "[ERR] Ensure your device is in USB boot mode and run usbtool again.\n"); |
| return -4; |
| |
| found: |
| if ( (dh = usb_open(dev)) == NULL) |
| { |
| fprintf(stderr,"[ERR] Unable to open device.\n"); |
| return -5; |
| } |
| |
| /* usb_set_configuration() calls are already done in Linux */ |
| #ifdef _WIN32 |
| err = usb_set_configuration(dh, 1); |
| |
| if (err < 0) |
| { |
| fprintf(stderr, "[ERR] usb_set_configuration failed (%d, %s)\n", err, usb_strerror()); |
| usb_close(dh); |
| return -6; |
| } |
| #endif |
| |
| /* "must be called" written in the libusb documentation */ |
| err = usb_claim_interface(dh, 0); |
| if (err < 0) |
| { |
| fprintf(stderr, "[ERR] Unable to claim interface (%d, %s)\n", err, usb_strerror()); |
| usb_close(dh); |
| return -7; |
| } |
| |
| fprintf(stderr,"[INFO] Found device, uploading application.\n"); |
| |
| /* Now we can transfer the application to the device. */ |
| |
| switch(func) |
| { |
| case 1: |
| case 5: |
| err = upload_app(dh, address, buf, len, (func == 5)); |
| break; |
| case 2: |
| err = read_data(dh, address, buf, len); |
| break; |
| case 3: |
| err = test_device(dh); |
| break; |
| case 6: |
| case 7: |
| err = mimic_of(dh, (func == 7)); |
| break; |
| case 8: |
| err = nand_dump(dh); |
| break; |
| case 9: |
| err = rom_dump(dh); |
| break; |
| case 10: |
| err = send_rockbox(dh, (char*)buf); |
| break; |
| } |
| |
| /* release claimed interface */ |
| usb_release_interface(dh, 0); |
| |
| usb_close(dh); |
| |
| return err; |
| } |
| |
| void print_usage(void) |
| { |
| #ifdef _WIN32 |
| fprintf(stderr, "Usage: usbtool.exe <CMD> [FILE] [ADDRESS] [LEN]\n"); |
| #else |
| fprintf(stderr, "Usage: usbtool <CMD> [FILE] [ADDRESS] [LEN]\n"); |
| #endif |
| |
| fprintf(stderr, "\t[ADDRESS] has to be in 0xHEXADECIMAL format\n"); |
| fprintf(stderr, "\tCMD:\n"); |
| fprintf(stderr, "\t\t 1 -> upload file to specified address and boot from it\n"); |
| fprintf(stderr, "\t\t 2 -> read data from [ADDRESS] with length [LEN] to [FILE]\n"); |
| fprintf(stderr, "\t\t 3 -> read device status\n"); |
| fprintf(stderr, "\t\t 5 -> same as 1 but do a stage 2 boot\n"); |
| fprintf(stderr, "\t\t 6 -> mimic VX747 OF fw recovery\n"); |
| fprintf(stderr, "\t\t 7 -> mimic VX767 OF fw recovery\n"); |
| fprintf(stderr, "\t\t 8 -> do a NAND dump\n"); |
| fprintf(stderr, "\t\t 9 -> do a ROM dump\n"); |
| fprintf(stderr, "\t\t10 -> send Rockbox bootloader at [FILE] to SDRAM\n"); |
| |
| #ifdef _WIN32 |
| fprintf(stderr, "\nExample:\n\t usbtool.exe 1 fw.bin 0x80000000\n"); |
| fprintf(stderr, "\t usbtool.exe 2 save.bin 0x81000000 1024\n"); |
| #else |
| fprintf(stderr, "\nExample:\n\t usbtool 1 fw.bin 0x80000000\n"); |
| fprintf(stderr, "\t usbtool 2 save.bin 0x81000000 1024\n"); |
| #endif |
| } |
| |
| int main(int argc, char* argv[]) |
| { |
| unsigned char* buf; |
| int n, len, address, cmd=0; |
| FILE* fd; |
| |
| fprintf(stderr, "USBtool v" VERSION " - (C) 2008 Maurus Cuelenaere\n"); |
| fprintf(stderr, "This is free software; see the source for copying conditions. There is NO\n"); |
| fprintf(stderr, "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n\n"); |
| |
| if(argc > 1) |
| sscanf(argv[1], "%d", &cmd); |
| switch(cmd) |
| { |
| case 5: |
| case 1: |
| if (strcmp(argv[3], "-1") == 0) |
| address = 0x80000000; |
| else |
| { |
| if (sscanf(argv[3], "0x%x", &address) <= 0) |
| { |
| print_usage(); |
| return -1; |
| } |
| } |
| |
| fd = fopen(argv[2], "rb"); |
| if (fd < 0) |
| { |
| fprintf(stderr, "[ERR] Could not open %s\n", argv[2]); |
| return 4; |
| } |
| |
| len = filesize(fd); |
| |
| if (len > MAX_FIRMWARESIZE) |
| { |
| fprintf(stderr, "[ERR] Firmware file too big\n"); |
| fclose(fd); |
| return 5; |
| } |
| |
| buf = malloc(len); |
| if (buf == NULL) |
| { |
| fprintf(stderr, "[ERR] Could not allocate memory.\n"); |
| fclose(fd); |
| return 6; |
| } |
| |
| n = fread(buf, 1, len, fd); |
| if (n != len) |
| { |
| fprintf(stderr, "[ERR] Short read.\n"); |
| fclose(fd); |
| return 7; |
| } |
| fclose(fd); |
| |
| fprintf(stderr, "[INFO] File size: %d bytes\n", n); |
| |
| return jzconnect(address, buf, len, cmd); |
| case 2: |
| if (sscanf(argv[3], "0x%x", &address) <= 0) |
| { |
| print_usage(); |
| return -1; |
| } |
| |
| fd = fopen(argv[2], "wb"); |
| if (fd < 0) |
| { |
| fprintf(stderr, "[ERR] Could not open %s\n", argv[2]); |
| return 4; |
| } |
| |
| sscanf(argv[4], "%d", &len); |
| |
| buf = malloc(len); |
| if (buf == NULL) |
| { |
| fprintf(stderr, "[ERR] Could not allocate memory.\n"); |
| fclose(fd); |
| return 6; |
| } |
| |
| int err = jzconnect(address, buf, len, 2); |
| |
| n = fwrite(buf, 1, len, fd); |
| if (n != len) |
| { |
| fprintf(stderr, "[ERR] Short write.\n"); |
| fclose(fd); |
| return 7; |
| } |
| fclose(fd); |
| |
| return err; |
| case 10: |
| if(argc < 3) |
| { |
| print_usage(); |
| return 1; |
| } |
| |
| if(!file_exists(argv[2])) |
| { |
| print_usage(); |
| return 1; |
| } |
| return jzconnect(address, (unsigned char*)argv[2], 0, 10); |
| case 3: |
| case 6: |
| case 7: |
| case 8: |
| case 9: |
| return jzconnect(address, NULL, 0, cmd); |
| default: |
| print_usage(); |
| return 1; |
| } |
| |
| return 0; |
| } |