| /*************************************************************************** |
| * __________ __ ___. |
| * Open \______ \ ____ ____ | | _\_ |__ _______ ___ |
| * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / |
| * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < |
| * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ |
| * \/ \/ \/ \/ \/ |
| * $Id$ |
| * |
| * Copyright (C) 2002 Heikki Hannikainen |
| * |
| * All files in this archive are subject to the GNU General Public License. |
| * See the file COPYING in the source tree root for full license agreement. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ****************************************************************************/ |
| |
| #include "config.h" |
| #ifndef SIMULATOR |
| #include <stdio.h> |
| #include <stdbool.h> |
| #include <string.h> |
| #include "lcd.h" |
| #include "menu.h" |
| #include "debug_menu.h" |
| #include "kernel.h" |
| #include "sprintf.h" |
| #include "button.h" |
| #include "adc.h" |
| #include "mas.h" |
| #include "power.h" |
| #include "rtc.h" |
| #include "debug.h" |
| #include "thread.h" |
| #include "powermgmt.h" |
| #include "system.h" |
| #include "font.h" |
| #include "disk.h" |
| #include "audio.h" |
| #include "mp3_playback.h" |
| #include "settings.h" |
| #include "ata.h" |
| #include "fat.h" |
| #include "dir.h" |
| #include "panic.h" |
| #include "screens.h" |
| #include "misc.h" |
| #include "splash.h" |
| |
| #ifdef HAVE_LCD_BITMAP |
| #include "widgets.h" |
| #include "peakmeter.h" |
| #endif |
| #ifdef CONFIG_TUNER |
| #include "radio.h" |
| #endif |
| #ifdef HAVE_MMC |
| #include "ata_mmc.h" |
| #endif |
| #include "logfdisp.h" |
| #if CONFIG_CODEC == SWCODEC |
| #include "pcmbuf.h" |
| #include "pcm_playback.h" |
| #endif |
| |
| /*---------------------------------------------------*/ |
| /* SPECIAL DEBUG STUFF */ |
| /*---------------------------------------------------*/ |
| extern char ata_device; |
| extern int ata_io_address; |
| extern int num_threads; |
| extern const char *thread_name[]; |
| |
| #ifdef HAVE_LCD_BITMAP |
| /* Test code!!! */ |
| bool dbg_os(void) |
| { |
| char buf[32]; |
| int button; |
| int i; |
| int usage; |
| |
| lcd_setmargins(0, 0); |
| lcd_setfont(FONT_SYSFIXED); |
| lcd_clear_display(); |
| |
| while(1) |
| { |
| lcd_puts(0, 0, "Stack usage:"); |
| for(i = 0; i < num_threads;i++) |
| { |
| usage = thread_stack_usage(i); |
| snprintf(buf, 32, "%s: %d%%", thread_name[i], usage); |
| lcd_puts(0, 1+i, buf); |
| } |
| |
| lcd_update(); |
| |
| button = button_get_w_tmo(HZ/10); |
| |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| return false; |
| } |
| } |
| return false; |
| } |
| #else /* !HAVE_LCD_BITMAP */ |
| bool dbg_os(void) |
| { |
| char buf[32]; |
| int button; |
| int usage; |
| int currval = 0; |
| |
| lcd_clear_display(); |
| |
| while(1) |
| { |
| lcd_puts(0, 0, "Stack usage"); |
| |
| usage = thread_stack_usage(currval); |
| snprintf(buf, 32, "%d: %d%% ", currval, usage); |
| lcd_puts(0, 1, buf); |
| |
| button = button_get_w_tmo(HZ/10); |
| |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| return false; |
| |
| case SETTINGS_DEC: |
| currval--; |
| if(currval < 0) |
| currval = num_threads-1; |
| break; |
| |
| case SETTINGS_INC: |
| currval++; |
| if(currval > num_threads-1) |
| currval = 0; |
| break; |
| } |
| } |
| return false; |
| } |
| #endif /* !HAVE_LCD_BITMAP */ |
| |
| #ifdef HAVE_LCD_BITMAP |
| #if CONFIG_CODEC != SWCODEC |
| bool dbg_audio_thread(void) |
| { |
| char buf[32]; |
| int button; |
| struct audio_debug d; |
| |
| lcd_setmargins(0, 0); |
| lcd_setfont(FONT_SYSFIXED); |
| |
| while(1) |
| { |
| button = button_get_w_tmo(HZ/5); |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| return false; |
| } |
| |
| audio_get_debugdata(&d); |
| |
| lcd_clear_display(); |
| |
| snprintf(buf, sizeof(buf), "read: %x", d.audiobuf_read); |
| lcd_puts(0, 0, buf); |
| snprintf(buf, sizeof(buf), "write: %x", d.audiobuf_write); |
| lcd_puts(0, 1, buf); |
| snprintf(buf, sizeof(buf), "swap: %x", d.audiobuf_swapwrite); |
| lcd_puts(0, 2, buf); |
| snprintf(buf, sizeof(buf), "playing: %d", d.playing); |
| lcd_puts(0, 3, buf); |
| snprintf(buf, sizeof(buf), "playable: %x", d.playable_space); |
| lcd_puts(0, 4, buf); |
| snprintf(buf, sizeof(buf), "unswapped: %x", d.unswapped_space); |
| lcd_puts(0, 5, buf); |
| |
| /* Playable space left */ |
| scrollbar(0, 6*8, 112, 4, d.audiobuflen, 0, |
| d.playable_space, HORIZONTAL); |
| |
| /* Show the watermark limit */ |
| scrollbar(0, 6*8+4, 112, 4, d.audiobuflen, 0, |
| d.low_watermark_level, HORIZONTAL); |
| |
| snprintf(buf, sizeof(buf), "wm: %x - %x", |
| d.low_watermark_level, d.lowest_watermark_level); |
| lcd_puts(0, 7, buf); |
| |
| lcd_update(); |
| } |
| return false; |
| } |
| #else /* CONFIG_CODEC == SWCODEC */ |
| extern size_t audiobuffer_free; |
| extern int filebuflen; |
| extern int filebufused; |
| extern int track_count; |
| |
| static int ticks, boost_ticks; |
| |
| void dbg_audio_task(void) |
| { |
| if(FREQ > CPUFREQ_NORMAL) |
| boost_ticks++; |
| |
| ticks++; |
| } |
| |
| bool dbg_audio_thread(void) |
| { |
| char buf[32]; |
| int button; |
| int line; |
| bool done = false; |
| int bufsize = pcmbuf_get_bufsize(); |
| |
| ticks = boost_ticks = 0; |
| |
| tick_add_task(dbg_audio_task); |
| |
| lcd_setmargins(0, 0); |
| lcd_setfont(FONT_SYSFIXED); |
| |
| while(!done) |
| { |
| button = button_get_w_tmo(HZ/5); |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| done = true; |
| break; |
| } |
| |
| line = 0; |
| |
| lcd_clear_display(); |
| |
| snprintf(buf, sizeof(buf), "pcm: %d/%d", |
| bufsize-(int)audiobuffer_free, bufsize); |
| lcd_puts(0, line++, buf); |
| |
| /* Playable space left */ |
| scrollbar(0, line*8, LCD_WIDTH, 6, bufsize, 0, |
| bufsize-audiobuffer_free, HORIZONTAL); |
| line++; |
| |
| snprintf(buf, sizeof(buf), "codec: %d/%d", filebufused, filebuflen); |
| lcd_puts(0, line++, buf); |
| |
| /* Playable space left */ |
| scrollbar(0, line*8, LCD_WIDTH, 6, filebuflen, 0, |
| filebufused, HORIZONTAL); |
| line++; |
| |
| snprintf(buf, sizeof(buf), "track count: %d", track_count); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "cpu freq: %dMHz", |
| (int)((FREQ + 500000) / 1000000)); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "boost ratio: %d%%", |
| boost_ticks * 100 / ticks); |
| lcd_puts(0, line++, buf); |
| |
| lcd_update(); |
| } |
| |
| tick_remove_task(dbg_audio_task); |
| |
| return false; |
| } |
| #endif /* CONFIG_CODEC */ |
| #endif /* HAVE_LCD_BITMAP */ |
| |
| /* Tool function to calculate a CRC16 across some buffer */ |
| unsigned short crc_16(const unsigned char* buf, unsigned len) |
| { |
| /* CCITT standard polynomial 0x1021 */ |
| static const unsigned short crc16_lookup[16] = |
| { /* lookup table for 4 bits at a time is affordable */ |
| 0x0000, 0x1021, 0x2042, 0x3063, |
| 0x4084, 0x50A5, 0x60C6, 0x70E7, |
| 0x8108, 0x9129, 0xA14A, 0xB16B, |
| 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF |
| }; |
| unsigned short crc16 = 0xFFFF; /* initialise to 0xFFFF (CCITT specification) */ |
| unsigned t; |
| unsigned char byte; |
| |
| while (len--) |
| { |
| byte = *buf++; /* get one byte of data */ |
| |
| /* upper nibble of our data */ |
| t = crc16 >> 12; /* extract the 4 most significant bits */ |
| t ^= byte >> 4; /* XOR in 4 bits of the data into the extracted bits */ |
| crc16 <<= 4; /* shift the CRC Register left 4 bits */ |
| crc16 ^= crc16_lookup[t]; /* do the table lookup and XOR the result */ |
| |
| /* lower nibble of our data */ |
| t = crc16 >> 12; /* extract the 4 most significant bits */ |
| t ^= byte & 0x0F; /* XOR in 4 bits of the data into the extracted bits */ |
| crc16 <<= 4; /* shift the CRC Register left 4 bits */ |
| crc16 ^= crc16_lookup[t]; /* do the table lookup and XOR the result */ |
| } |
| |
| return crc16; |
| } |
| |
| |
| #if CONFIG_CPU == TCC730 |
| static unsigned flash_word_temp __attribute__ ((section (".idata"))); |
| |
| static void flash_write_word(unsigned addr, unsigned value) __attribute__ ((section(".icode"))); |
| static void flash_write_word(unsigned addr, unsigned value) { |
| flash_word_temp = value; |
| |
| long extAddr = (long)addr << 1; |
| ddma_transfer(1, 1, &flash_word_temp, extAddr, 2); |
| } |
| |
| static unsigned flash_read_word(unsigned addr) __attribute__ ((section(".icode"))); |
| static unsigned flash_read_word(unsigned addr) { |
| long extAddr = (long)addr << 1; |
| ddma_transfer(1, 1, &flash_word_temp, extAddr, 2); |
| return flash_word_temp; |
| } |
| |
| #endif |
| |
| /* Tool function to read the flash manufacturer and type, if available. |
| Only chips which could be reprogrammed in system will return values. |
| (The mode switch addresses vary between flash manufacturers, hence addr1/2) */ |
| /* In IRAM to avoid problems when running directly from Flash */ |
| bool dbg_flash_id(unsigned* p_manufacturer, unsigned* p_device, |
| unsigned addr1, unsigned addr2) |
| __attribute__ ((section (".icode"))); |
| bool dbg_flash_id(unsigned* p_manufacturer, unsigned* p_device, |
| unsigned addr1, unsigned addr2) |
| |
| { |
| #if (CONFIG_CPU == PP5002) || (CONFIG_CPU == PP5020) |
| /* TODO: Implement for iPod */ |
| (void)p_manufacturer; |
| (void)p_device; |
| (void)addr1; |
| (void)addr2; |
| #elif CONFIG_CPU == PNX0101 |
| /* TODO: Implement for iFP7xx */ |
| (void)p_manufacturer; |
| (void)p_device; |
| (void)addr1; |
| (void)addr2; |
| #else |
| unsigned not_manu, not_id; /* read values before switching to ID mode */ |
| unsigned manu, id; /* read values when in ID mode */ |
| #if CONFIG_CPU == TCC730 |
| #define FLASH(addr) (flash_read_word(addr)) |
| #define SET_FLASH(addr, val) (flash_write_word((addr), (val))) |
| |
| #else /* memory mapped */ |
| #if CONFIG_CPU == SH7034 |
| volatile unsigned char* flash = (unsigned char*)0x2000000; /* flash mapping */ |
| #elif CONFIG_CPU == MCF5249 |
| volatile unsigned short* flash = (unsigned short*)0; /* flash mapping */ |
| #endif |
| #define FLASH(addr) (flash[addr]) |
| #define SET_FLASH(addr, val) (flash[addr] = val) |
| #endif |
| int old_level; /* saved interrupt level */ |
| |
| not_manu = FLASH(0); /* read the normal content */ |
| not_id = FLASH(1); /* should be 'A' (0x41) and 'R' (0x52) from the "ARCH" marker */ |
| |
| /* disable interrupts, prevent any stray flash access */ |
| old_level = set_irq_level(HIGHEST_IRQ_LEVEL); |
| |
| SET_FLASH(addr1, 0xAA); /* enter command mode */ |
| SET_FLASH(addr2, 0x55); |
| SET_FLASH(addr1, 0x90); /* ID command */ |
| /* Atmel wants 20ms pause here */ |
| /* sleep(HZ/50); no sleeping possible while interrupts are disabled */ |
| |
| manu = FLASH(0); /* read the IDs */ |
| id = FLASH(1); |
| |
| SET_FLASH(0, 0xF0); /* reset flash (back to normal read mode) */ |
| /* Atmel wants 20ms pause here */ |
| /* sleep(HZ/50); no sleeping possible while interrupts are disabled */ |
| |
| set_irq_level(old_level); /* enable interrupts again */ |
| |
| /* I assume success if the obtained values are different from |
| the normal flash content. This is not perfectly bulletproof, they |
| could theoretically be the same by chance, causing us to fail. */ |
| if (not_manu != manu || not_id != id) /* a value has changed */ |
| { |
| *p_manufacturer = manu; /* return the results */ |
| *p_device = id; |
| return true; /* success */ |
| } |
| #endif |
| return false; /* fail */ |
| } |
| |
| #ifdef HAVE_LCD_BITMAP |
| bool dbg_hw_info(void) |
| { |
| #if CONFIG_CPU == SH7034 |
| char buf[32]; |
| int button; |
| int usb_polarity; |
| int pr_polarity; |
| int bitmask = *(unsigned short*)0x20000fc; |
| int rom_version = *(unsigned short*)0x20000fe; |
| unsigned manu, id; /* flash IDs */ |
| bool got_id; /* flag if we managed to get the flash IDs */ |
| unsigned rom_crc = 0xFFFF; /* CRC16 of the boot ROM */ |
| bool has_bootrom; /* flag for boot ROM present */ |
| int oldmode; /* saved memory guard mode */ |
| |
| #ifdef USB_ENABLE_ONDIOSTYLE |
| if(PADRL & 0x20) |
| #else |
| if(PADRH & 0x04) |
| #endif |
| usb_polarity = 0; /* Negative */ |
| else |
| usb_polarity = 1; /* Positive */ |
| |
| if(PADRH & 0x08) |
| pr_polarity = 0; /* Negative */ |
| else |
| pr_polarity = 1; /* Positive */ |
| |
| oldmode = system_memory_guard(MEMGUARD_NONE); /* disable memory guard */ |
| |
| /* get flash ROM type */ |
| got_id = dbg_flash_id(&manu, &id, 0x5555, 0x2AAA); /* try SST, Atmel, NexFlash */ |
| if (!got_id) |
| got_id = dbg_flash_id(&manu, &id, 0x555, 0x2AA); /* try AMD, Macronix */ |
| |
| /* check if the boot ROM area is a flash mirror */ |
| has_bootrom = (memcmp((char*)0, (char*)0x02000000, 64*1024) != 0); |
| if (has_bootrom) /* if ROM and Flash different */ |
| { |
| /* calculate CRC16 checksum of boot ROM */ |
| rom_crc = crc_16((unsigned char*)0x0000, 64*1024); |
| } |
| |
| system_memory_guard(oldmode); /* re-enable memory guard */ |
| |
| lcd_setmargins(0, 0); |
| lcd_setfont(FONT_SYSFIXED); |
| lcd_clear_display(); |
| |
| lcd_puts(0, 0, "[Hardware info]"); |
| |
| snprintf(buf, 32, "ROM: %d.%02d", rom_version/100, rom_version%100); |
| lcd_puts(0, 1, buf); |
| |
| snprintf(buf, 32, "Mask: 0x%04x", bitmask); |
| lcd_puts(0, 2, buf); |
| |
| snprintf(buf, 32, "USB: %s", usb_polarity?"positive":"negative"); |
| lcd_puts(0, 3, buf); |
| |
| snprintf(buf, 32, "PR: %s", pr_polarity?"positive":"negative"); |
| lcd_puts(0, 4, buf); |
| |
| if (got_id) |
| snprintf(buf, 32, "Flash: M=%02x D=%02x", manu, id); |
| else |
| snprintf(buf, 32, "Flash: M=?? D=??"); /* unknown, sorry */ |
| lcd_puts(0, 5, buf); |
| |
| if (has_bootrom) |
| { |
| snprintf(buf, 32-3, "ROM CRC: 0x%04x", rom_crc); |
| if (rom_crc == 0x222F) /* known Version 1 */ |
| strcat(buf, " V1"); |
| } |
| else |
| { |
| snprintf(buf, 32, "Boot ROM: none"); |
| } |
| lcd_puts(0, 6, buf); |
| |
| #ifndef HAVE_MMC /* have ATA */ |
| snprintf(buf, 32, "ATA: 0x%x,%s", ata_io_address, |
| ata_device ? "slave":"master"); |
| lcd_puts(0, 7, buf); |
| #endif |
| lcd_update(); |
| |
| while(1) |
| { |
| button = button_get(true); |
| if(button == SETTINGS_CANCEL) |
| return false; |
| } |
| #elif CONFIG_CPU == MCF5249 |
| char buf[32]; |
| int button; |
| unsigned manu, id; /* flash IDs */ |
| bool got_id; /* flag if we managed to get the flash IDs */ |
| int oldmode; /* saved memory guard mode */ |
| |
| oldmode = system_memory_guard(MEMGUARD_NONE); /* disable memory guard */ |
| |
| /* get flash ROM type */ |
| got_id = dbg_flash_id(&manu, &id, 0x5555, 0x2AAA); /* try SST, Atmel, NexFlash */ |
| if (!got_id) |
| got_id = dbg_flash_id(&manu, &id, 0x555, 0x2AA); /* try AMD, Macronix */ |
| |
| system_memory_guard(oldmode); /* re-enable memory guard */ |
| |
| lcd_setmargins(0, 0); |
| lcd_setfont(FONT_SYSFIXED); |
| lcd_clear_display(); |
| |
| lcd_puts(0, 0, "[Hardware info]"); |
| |
| if (got_id) |
| snprintf(buf, 32, "Flash: M=%04x D=%04x", manu, id); |
| else |
| snprintf(buf, 32, "Flash: M=???? D=????"); /* unknown, sorry */ |
| lcd_puts(0, 1, buf); |
| |
| lcd_update(); |
| |
| while(1) |
| { |
| button = button_get(true); |
| if(button == SETTINGS_CANCEL) |
| return false; |
| } |
| #endif /* CONFIG_CPU */ |
| return false; |
| } |
| #else /* !HAVE_LCD_BITMAP */ |
| bool dbg_hw_info(void) |
| { |
| char buf[32]; |
| int button; |
| int currval = 0; |
| int usb_polarity; |
| int bitmask = *(unsigned short*)0x20000fc; |
| int rom_version = *(unsigned short*)0x20000fe; |
| unsigned manu, id; /* flash IDs */ |
| bool got_id; /* flag if we managed to get the flash IDs */ |
| unsigned rom_crc = 0xFFFF; /* CRC16 of the boot ROM */ |
| bool has_bootrom; /* flag for boot ROM present */ |
| int oldmode; /* saved memory guard mode */ |
| |
| if(PADRH & 0x04) |
| usb_polarity = 0; /* Negative */ |
| else |
| usb_polarity = 1; /* Positive */ |
| |
| oldmode = system_memory_guard(MEMGUARD_NONE); /* disable memory guard */ |
| |
| /* get flash ROM type */ |
| got_id = dbg_flash_id(&manu, &id, 0x5555, 0x2AAA); /* try SST, Atmel, NexFlash */ |
| if (!got_id) |
| got_id = dbg_flash_id(&manu, &id, 0x555, 0x2AA); /* try AMD, Macronix */ |
| |
| /* check if the boot ROM area is a flash mirror */ |
| has_bootrom = (memcmp((char*)0, (char*)0x02000000, 64*1024) != 0); |
| if (has_bootrom) /* if ROM and Flash different */ |
| { |
| /* calculate CRC16 checksum of boot ROM */ |
| rom_crc = crc_16((unsigned char*)0x0000, 64*1024); |
| } |
| |
| system_memory_guard(oldmode); /* re-enable memory guard */ |
| |
| lcd_clear_display(); |
| |
| lcd_puts(0, 0, "[HW Info]"); |
| while(1) |
| { |
| switch(currval) |
| { |
| case 0: |
| snprintf(buf, 32, "ROM: %d.%02d", |
| rom_version/100, rom_version%100); |
| break; |
| case 1: |
| snprintf(buf, 32, "USB: %s", |
| usb_polarity?"pos":"neg"); |
| break; |
| case 2: |
| snprintf(buf, 32, "ATA: 0x%x%s", |
| ata_io_address, ata_device ? "s":"m"); |
| break; |
| case 3: |
| snprintf(buf, 32, "Mask: %04x", bitmask); |
| break; |
| case 4: |
| if (got_id) |
| snprintf(buf, 32, "Flash:%02x,%02x", manu, id); |
| else |
| snprintf(buf, 32, "Flash:??,??"); /* unknown, sorry */ |
| break; |
| case 5: |
| if (has_bootrom) |
| snprintf(buf, 32, "RomCRC:%04x", rom_crc); |
| else |
| snprintf(buf, 32, "BootROM: no"); |
| } |
| |
| lcd_puts(0, 1, buf); |
| lcd_update(); |
| |
| button = button_get(true); |
| |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| return false; |
| |
| case SETTINGS_DEC: |
| currval--; |
| if(currval < 0) |
| currval = 5; |
| break; |
| |
| case SETTINGS_INC: |
| currval++; |
| if(currval > 5) |
| currval = 0; |
| break; |
| } |
| } |
| return false; |
| } |
| #endif /* !HAVE_LCD_BITMAP */ |
| |
| bool dbg_partitions(void) |
| { |
| int partition=0; |
| |
| lcd_clear_display(); |
| lcd_puts(0, 0, "Partition"); |
| lcd_puts(0, 1, "list"); |
| lcd_update(); |
| sleep(HZ/2); |
| |
| while(1) |
| { |
| char buf[32]; |
| int button; |
| struct partinfo* p = disk_partinfo(partition); |
| |
| lcd_clear_display(); |
| snprintf(buf, sizeof buf, "P%d: S:%lx", partition, p->start); |
| lcd_puts(0, 0, buf); |
| snprintf(buf, sizeof buf, "T:%x %ld MB", p->type, p->size / 2048); |
| lcd_puts(0, 1, buf); |
| lcd_update(); |
| |
| button = button_get(true); |
| |
| switch(button) |
| { |
| case SETTINGS_OK: |
| case SETTINGS_CANCEL: |
| return false; |
| |
| case SETTINGS_DEC: |
| partition--; |
| if (partition < 0) |
| partition = 3; |
| break; |
| |
| case SETTINGS_INC: |
| partition++; |
| if (partition > 3) |
| partition = 0; |
| break; |
| |
| default: |
| if(default_event_handler(button) == SYS_USB_CONNECTED) |
| return true; |
| break; |
| } |
| } |
| return false; |
| } |
| |
| #ifdef CPU_COLDFIRE |
| bool dbg_spdif(void) |
| { |
| char buf[128]; |
| int button; |
| int line; |
| unsigned int control; |
| int x; |
| char *s; |
| int category; |
| int generation; |
| unsigned int interruptstat; |
| bool valnogood, symbolerr, parityerr; |
| |
| lcd_setmargins(0, 0); |
| lcd_clear_display(); |
| lcd_setfont(FONT_SYSFIXED); |
| |
| while(1) |
| { |
| line = 0; |
| |
| control = EBU1RCVCCHANNEL1; |
| interruptstat = INTERRUPTSTAT; |
| INTERRUPTCLEAR = 0x03c00000; |
| |
| valnogood = (interruptstat & 0x01000000)?true:false; |
| symbolerr = (interruptstat & 0x00800000)?true:false; |
| parityerr = (interruptstat & 0x00400000)?true:false; |
| |
| snprintf(buf, sizeof(buf), "Val: %s Sym: %s Par: %s", |
| valnogood?"--":"OK", |
| symbolerr?"--":"OK", |
| parityerr?"--":"OK"); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "Status word: %08x", (int)control); |
| lcd_puts(0, line++, buf); |
| |
| line++; |
| |
| x = control >> 31; |
| snprintf(buf, sizeof(buf), "PRO: %d (%s)", |
| x, x?"Professional":"Consumer"); |
| lcd_puts(0, line++, buf); |
| |
| x = (control >> 30) & 1; |
| snprintf(buf, sizeof(buf), "Audio: %d (%s)", |
| x, x?"Non-PCM":"PCM"); |
| lcd_puts(0, line++, buf); |
| |
| x = (control >> 29) & 1; |
| snprintf(buf, sizeof(buf), "Copy: %d (%s)", |
| x, x?"Permitted":"Inhibited"); |
| lcd_puts(0, line++, buf); |
| |
| x = (control >> 27) & 7; |
| switch(x) |
| { |
| case 0: |
| s = "None"; |
| break; |
| case 1: |
| s = "50/15us"; |
| break; |
| default: |
| s = "Reserved"; |
| break; |
| } |
| snprintf(buf, sizeof(buf), "Preemphasis: %d (%s)", x, s); |
| lcd_puts(0, line++, buf); |
| |
| x = (control >> 24) & 3; |
| snprintf(buf, sizeof(buf), "Mode: %d", x); |
| lcd_puts(0, line++, buf); |
| |
| category = (control >> 17) & 127; |
| switch(category) |
| { |
| case 0x00: |
| s = "General"; |
| break; |
| case 0x40: |
| s = "Audio CD"; |
| break; |
| default: |
| s = "Unknown"; |
| } |
| snprintf(buf, sizeof(buf), "Category: 0x%02x (%s)", category, s); |
| lcd_puts(0, line++, buf); |
| |
| x = (control >> 16) & 1; |
| generation = x; |
| if(((category & 0x70) == 0x10) || |
| ((category & 0x70) == 0x40) || |
| ((category & 0x78) == 0x38)) |
| { |
| generation = !generation; |
| } |
| snprintf(buf, sizeof(buf), "Generation: %d (%s)", |
| x, generation?"Original":"No ind."); |
| lcd_puts(0, line++, buf); |
| |
| x = (control >> 12) & 15; |
| snprintf(buf, sizeof(buf), "Source: %d", x); |
| lcd_puts(0, line++, buf); |
| |
| x = (control >> 8) & 15; |
| switch(x) |
| { |
| case 0: |
| s = "Unspecified"; |
| break; |
| case 8: |
| s = "A (Left)"; |
| break; |
| case 4: |
| s = "B (Right)"; |
| break; |
| default: |
| s = ""; |
| break; |
| } |
| snprintf(buf, sizeof(buf), "Channel: %d (%s)", x, s); |
| lcd_puts(0, line++, buf); |
| |
| x = (control >> 4) & 15; |
| switch(x) |
| { |
| case 0: |
| s = "44.1kHz"; |
| break; |
| case 0x4: |
| s = "48kHz"; |
| break; |
| case 0xc: |
| s = "32kHz"; |
| break; |
| } |
| snprintf(buf, sizeof(buf), "Frequency: %d (%s)", x, s); |
| lcd_puts(0, line++, buf); |
| |
| x = (control >> 2) & 3; |
| snprintf(buf, sizeof(buf), "Clock accuracy: %d", x); |
| lcd_puts(0, line++, buf); |
| |
| lcd_update(); |
| button = button_get_w_tmo(HZ/10); |
| |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| case SETTINGS_OK2: |
| return false; |
| } |
| } |
| |
| return false; |
| } |
| #endif /* CPU_COLDFIRE */ |
| |
| #ifdef HAVE_LCD_BITMAP |
| /* Test code!!! */ |
| bool dbg_ports(void) |
| { |
| #if CONFIG_CPU == SH7034 |
| unsigned short porta; |
| unsigned short portb; |
| unsigned char portc; |
| char buf[32]; |
| int button; |
| int battery_voltage; |
| int batt_int, batt_frac; |
| |
| lcd_setfont(FONT_SYSFIXED); |
| lcd_setmargins(0, 0); |
| lcd_clear_display(); |
| |
| while(1) |
| { |
| porta = PADR; |
| portb = PBDR; |
| portc = PCDR; |
| |
| snprintf(buf, 32, "PADR: %04x", porta); |
| lcd_puts(0, 0, buf); |
| snprintf(buf, 32, "PBDR: %04x", portb); |
| lcd_puts(0, 1, buf); |
| |
| snprintf(buf, 32, "AN0: %03x AN4: %03x", adc_read(0), adc_read(4)); |
| lcd_puts(0, 2, buf); |
| snprintf(buf, 32, "AN1: %03x AN5: %03x", adc_read(1), adc_read(5)); |
| lcd_puts(0, 3, buf); |
| snprintf(buf, 32, "AN2: %03x AN6: %03x", adc_read(2), adc_read(6)); |
| lcd_puts(0, 4, buf); |
| snprintf(buf, 32, "AN3: %03x AN7: %03x", adc_read(3), adc_read(7)); |
| lcd_puts(0, 5, buf); |
| |
| battery_voltage = (adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR) / 10000; |
| batt_int = battery_voltage / 100; |
| batt_frac = battery_voltage % 100; |
| |
| snprintf(buf, 32, "Batt: %d.%02dV %d%% ", batt_int, batt_frac, |
| battery_level()); |
| lcd_puts(0, 6, buf); |
| #ifndef HAVE_MMC /* have ATA */ |
| snprintf(buf, 32, "ATA: %s, 0x%x", |
| ata_device?"slave":"master", ata_io_address); |
| lcd_puts(0, 7, buf); |
| #endif |
| lcd_update(); |
| button = button_get_w_tmo(HZ/10); |
| |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| return false; |
| } |
| } |
| #elif defined(CPU_COLDFIRE) |
| unsigned int gpio_out; |
| unsigned int gpio1_out; |
| unsigned int gpio_read; |
| unsigned int gpio1_read; |
| unsigned int gpio_function; |
| unsigned int gpio1_function; |
| unsigned int gpio_enable; |
| unsigned int gpio1_enable; |
| int adc_buttons, adc_remote, adc_battery; |
| char buf[128]; |
| int button; |
| int line; |
| int battery_voltage; |
| int batt_int, batt_frac; |
| |
| lcd_setmargins(0, 0); |
| lcd_clear_display(); |
| lcd_setfont(FONT_SYSFIXED); |
| |
| while(1) |
| { |
| line = 0; |
| gpio_read = GPIO_READ; |
| gpio1_read = GPIO1_READ; |
| gpio_out = GPIO_OUT; |
| gpio1_out = GPIO1_OUT; |
| gpio_function = GPIO_FUNCTION; |
| gpio1_function = GPIO1_FUNCTION; |
| gpio_enable = GPIO_ENABLE; |
| gpio1_enable = GPIO1_ENABLE; |
| |
| snprintf(buf, sizeof(buf), "GPIO_READ: %08x", gpio_read); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO_OUT: %08x", gpio_out); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO_FUNCTION: %08x", gpio_function); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO_ENABLE: %08x", gpio_enable); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "GPIO1_READ: %08x", gpio1_read); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO1_OUT: %08x", gpio1_out); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO1_FUNCTION: %08x", gpio1_function); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO1_ENABLE: %08x", gpio1_enable); |
| lcd_puts(0, line++, buf); |
| |
| adc_buttons = adc_read(ADC_BUTTONS); |
| adc_remote = adc_read(ADC_REMOTE); |
| adc_battery = adc_read(ADC_BATTERY); |
| |
| snprintf(buf, sizeof(buf), "ADC_BUTTONS: %02x", adc_buttons); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "ADC_REMOTE: %02x", adc_remote); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "ADC_BATTERY: %02x", adc_battery); |
| lcd_puts(0, line++, buf); |
| |
| battery_voltage = (adc_battery * BATTERY_SCALE_FACTOR) / 10000; |
| batt_int = battery_voltage / 100; |
| batt_frac = battery_voltage % 100; |
| |
| snprintf(buf, 32, "Batt: %d.%02dV %d%% ", batt_int, batt_frac, |
| battery_level()); |
| lcd_puts(0, line++, buf); |
| |
| lcd_update(); |
| button = button_get_w_tmo(HZ/10); |
| |
| switch(button) |
| { /* quit on release to allow for reading the cancel button input */ |
| case (SETTINGS_CANCEL|BUTTON_REL): |
| return false; |
| } |
| } |
| |
| #elif CONFIG_CPU == PP5020 |
| |
| unsigned int gpio_a, gpio_b, gpio_c, gpio_d; |
| |
| char buf[128]; |
| int button; |
| int line; |
| |
| lcd_setmargins(0, 0); |
| lcd_clear_display(); |
| lcd_setfont(FONT_SYSFIXED); |
| |
| while(1) |
| { |
| gpio_a = GPIOA_INPUT_VAL; |
| gpio_b = GPIOB_INPUT_VAL; |
| gpio_c = GPIOC_INPUT_VAL; |
| gpio_d = GPIOD_INPUT_VAL; |
| |
| line = 0; |
| snprintf(buf, sizeof(buf), "IPOD version: 0x%08x", ipod_hw_rev); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO_A: %02x", gpio_a); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO_B: %02x", gpio_b); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO_C: %02x", gpio_c); |
| lcd_puts(0, line++, buf); |
| snprintf(buf, sizeof(buf), "GPIO_D: %02x", gpio_d); |
| lcd_puts(0, line++, buf); |
| |
| lcd_update(); |
| button = button_get_w_tmo(HZ/10); |
| |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| return false; |
| } |
| } |
| |
| #endif /* CPU */ |
| return false; |
| } |
| #else /* !HAVE_LCD_BITMAP */ |
| bool dbg_ports(void) |
| { |
| unsigned short porta; |
| unsigned short portb; |
| unsigned char portc; |
| char buf[32]; |
| int button; |
| int battery_voltage; |
| int batt_int, batt_frac; |
| int currval = 0; |
| |
| lcd_clear_display(); |
| |
| while(1) |
| { |
| porta = PADR; |
| portb = PBDR; |
| portc = PCDR; |
| |
| switch(currval) |
| { |
| case 0: |
| snprintf(buf, 32, "PADR: %04x ", porta); |
| break; |
| case 1: |
| snprintf(buf, 32, "PBDR: %04x ", portb); |
| break; |
| case 2: |
| snprintf(buf, 32, "AN0: %03x ", adc_read(0)); |
| break; |
| case 3: |
| snprintf(buf, 32, "AN1: %03x ", adc_read(1)); |
| break; |
| case 4: |
| snprintf(buf, 32, "AN2: %03x ", adc_read(2)); |
| break; |
| case 5: |
| snprintf(buf, 32, "AN3: %03x ", adc_read(3)); |
| break; |
| case 6: |
| snprintf(buf, 32, "AN4: %03x ", adc_read(4)); |
| break; |
| case 7: |
| snprintf(buf, 32, "AN5: %03x ", adc_read(5)); |
| break; |
| case 8: |
| snprintf(buf, 32, "AN6: %03x ", adc_read(6)); |
| break; |
| case 9: |
| snprintf(buf, 32, "AN7: %03x ", adc_read(7)); |
| break; |
| case 10: |
| snprintf(buf, 32, "%s, 0x%x ", |
| ata_device?"slv":"mst", ata_io_address); |
| break; |
| } |
| lcd_puts(0, 0, buf); |
| |
| battery_voltage = (adc_read(ADC_UNREG_POWER) * |
| BATTERY_SCALE_FACTOR) / 10000; |
| batt_int = battery_voltage / 100; |
| batt_frac = battery_voltage % 100; |
| |
| snprintf(buf, 32, "Batt: %d.%02dV", batt_int, batt_frac); |
| lcd_puts(0, 1, buf); |
| |
| button = button_get_w_tmo(HZ/5); |
| |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| return false; |
| |
| case SETTINGS_DEC: |
| currval--; |
| if(currval < 0) |
| currval = 10; |
| break; |
| |
| case SETTINGS_INC: |
| currval++; |
| if(currval > 10) |
| currval = 0; |
| break; |
| } |
| } |
| return false; |
| } |
| #endif /* !HAVE_LCD_BITMAP */ |
| |
| #ifdef HAVE_ADJUSTABLE_CPU_FREQ |
| extern int boost_counter; |
| bool dbg_cpufreq(void) |
| { |
| char buf[128]; |
| int line; |
| int button; |
| |
| #ifdef HAVE_LCD_BITMAP |
| lcd_setmargins(0, 0); |
| lcd_setfont(FONT_SYSFIXED); |
| #endif |
| lcd_clear_display(); |
| |
| while(1) |
| { |
| line = 0; |
| |
| snprintf(buf, sizeof(buf), "Frequency: %ld", FREQ); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "boost_counter: %d", boost_counter); |
| lcd_puts(0, line++, buf); |
| |
| lcd_update(); |
| button = button_get_w_tmo(HZ/10); |
| |
| switch(button) |
| { |
| case BUTTON_UP: |
| cpu_boost(true); |
| break; |
| |
| case BUTTON_DOWN: |
| cpu_boost(false); |
| break; |
| |
| #if (CONFIG_KEYPAD == IRIVER_H100_PAD) || \ |
| (CONFIG_KEYPAD == IRIVER_H300_PAD) |
| case BUTTON_SELECT: |
| #else |
| case BUTTON_PLAY: |
| #endif |
| set_cpu_frequency(CPUFREQ_DEFAULT); |
| boost_counter = 0; |
| break; |
| |
| case SETTINGS_CANCEL: |
| case SETTINGS_OK2: |
| return false; |
| } |
| } |
| |
| return false; |
| } |
| #endif /* HAVE_ADJUSTABLE_CPU_FREQ */ |
| |
| #ifdef HAVE_LCD_BITMAP |
| /* |
| * view_battery() shows a automatically scaled graph of the battery voltage |
| * over time. Usable for estimating battery life / charging rate. |
| * The power_history array is updated in power_thread of powermgmt.c. |
| */ |
| |
| #define BAT_LAST_VAL MIN(LCD_WIDTH, POWER_HISTORY_LEN) |
| #define BAT_YSPACE (LCD_HEIGHT - 20) |
| |
| bool view_battery(void) |
| { |
| int view = 0; |
| int i, x, y; |
| unsigned short maxv, minv; |
| char buf[32]; |
| |
| lcd_setmargins(0, 0); |
| lcd_setfont(FONT_SYSFIXED); |
| |
| while(1) |
| { |
| switch (view) { |
| case 0: /* voltage history graph */ |
| /* Find maximum and minimum voltage for scaling */ |
| maxv = 0; |
| minv = 65535; |
| for (i = 0; i < BAT_LAST_VAL; i++) { |
| if (power_history[i] > maxv) |
| maxv = power_history[i]; |
| if (power_history[i] && (power_history[i] < minv)) |
| { |
| minv = power_history[i]; |
| } |
| } |
| |
| if ((minv < 1) || (minv >= 65535)) |
| minv = 1; |
| if (maxv < 2) |
| maxv = 2; |
| |
| lcd_clear_display(); |
| snprintf(buf, 30, "Battery %d.%02d", power_history[0] / 100, |
| power_history[0] % 100); |
| lcd_puts(0, 0, buf); |
| snprintf(buf, 30, "scale %d.%02d-%d.%02d V", |
| minv / 100, minv % 100, maxv / 100, maxv % 100); |
| lcd_puts(0, 1, buf); |
| |
| x = 0; |
| for (i = BAT_LAST_VAL - 1; i >= 0; i--) { |
| y = (power_history[i] - minv) * BAT_YSPACE / (maxv - minv); |
| lcd_set_drawmode(DRMODE_SOLID|DRMODE_INVERSEVID); |
| lcd_vline(x, LCD_HEIGHT-1, 20); |
| lcd_set_drawmode(DRMODE_SOLID); |
| lcd_vline(x, LCD_HEIGHT-1, |
| MIN(MAX(LCD_HEIGHT-1 - y, 20), LCD_HEIGHT-1)); |
| x++; |
| } |
| |
| break; |
| |
| case 1: /* status: */ |
| lcd_clear_display(); |
| lcd_puts(0, 0, "Power status:"); |
| |
| y = (adc_read(ADC_UNREG_POWER) * BATTERY_SCALE_FACTOR) / 10000; |
| snprintf(buf, 30, "Battery: %d.%02d V", y / 100, y % 100); |
| lcd_puts(0, 1, buf); |
| #ifdef ADC_EXT_POWER |
| y = (adc_read(ADC_EXT_POWER) * EXT_SCALE_FACTOR) / 10000; |
| snprintf(buf, 30, "External: %d.%02d V", y / 100, y % 100); |
| lcd_puts(0, 2, buf); |
| #endif |
| #ifdef HAVE_CHARGING |
| #ifdef HAVE_CHARGE_CTRL |
| snprintf(buf, 30, "Chgr: %s %s", |
| charger_inserted() ? "present" : "absent", |
| charger_enabled ? "on" : "off"); |
| lcd_puts(0, 3, buf); |
| snprintf(buf, 30, "short delta: %d", short_delta); |
| lcd_puts(0, 5, buf); |
| snprintf(buf, 30, "long delta: %d", long_delta); |
| lcd_puts(0, 6, buf); |
| lcd_puts(0, 7, power_message); |
| #else /* !HAVE_CHARGE_CTRL */ |
| snprintf(buf, 30, "Charger: %s", |
| charger_inserted() ? "present" : "absent"); |
| lcd_puts(0, 3, buf); |
| #endif /* !HAVE_CHARGE_CTRL */ |
| #endif /* HAVE_CHARGING */ |
| break; |
| |
| case 2: /* voltage deltas: */ |
| lcd_clear_display(); |
| lcd_puts(0, 0, "Voltage deltas:"); |
| |
| for (i = 0; i <= 6; i++) { |
| y = power_history[i] - power_history[i+i]; |
| snprintf(buf, 30, "-%d min: %s%d.%02d V", i, |
| (y < 0) ? "-" : "", ((y < 0) ? y * -1 : y) / 100, |
| ((y < 0) ? y * -1 : y ) % 100); |
| lcd_puts(0, i+1, buf); |
| } |
| break; |
| |
| case 3: /* remaining time estimation: */ |
| lcd_clear_display(); |
| |
| #ifdef HAVE_CHARGE_CTRL |
| snprintf(buf, 30, "charge_state: %d", charge_state); |
| lcd_puts(0, 0, buf); |
| |
| snprintf(buf, 30, "Cycle time: %d m", powermgmt_last_cycle_startstop_min); |
| lcd_puts(0, 1, buf); |
| |
| snprintf(buf, 30, "Lvl@cyc st: %d%%", powermgmt_last_cycle_level); |
| lcd_puts(0, 2, buf); |
| |
| snprintf(buf, 30, "P=%2d I=%2d", pid_p, pid_i); |
| lcd_puts(0, 3, buf); |
| |
| snprintf(buf, 30, "Trickle sec: %d/60", trickle_sec); |
| lcd_puts(0, 4, buf); |
| #endif /* HAVE_CHARGE_CTRL */ |
| |
| snprintf(buf, 30, "Last PwrHist: %d.%02d V", |
| power_history[0] / 100, |
| power_history[0] % 100); |
| lcd_puts(0, 5, buf); |
| |
| snprintf(buf, 30, "battery level: %d%%", battery_level()); |
| lcd_puts(0, 6, buf); |
| |
| snprintf(buf, 30, "Est. remain: %d m", battery_time()); |
| lcd_puts(0, 7, buf); |
| break; |
| } |
| |
| lcd_update(); |
| |
| switch(button_get_w_tmo(HZ/2)) |
| { |
| case SETTINGS_DEC: |
| if (view) |
| view--; |
| break; |
| |
| case SETTINGS_INC: |
| if (view < 3) |
| view++; |
| break; |
| |
| case SETTINGS_OK: |
| case SETTINGS_CANCEL: |
| return false; |
| } |
| } |
| return false; |
| } |
| |
| #endif /* HAVE_LCD_BITMAP */ |
| |
| static bool view_runtime(void) |
| { |
| char s[32]; |
| bool done = false; |
| int state = 1; |
| |
| while(!done) |
| { |
| int y=0; |
| int t; |
| int key; |
| lcd_clear_display(); |
| #ifdef HAVE_LCD_BITMAP |
| lcd_puts(0, y++, "Running time:"); |
| y++; |
| #endif |
| |
| if (state & 1) { |
| #ifdef HAVE_CHARGING |
| if (charger_inserted()) |
| { |
| global_settings.runtime = 0; |
| } |
| else |
| #endif |
| { |
| global_settings.runtime += ((current_tick - lasttime) / HZ); |
| } |
| lasttime = current_tick; |
| |
| t = global_settings.runtime; |
| lcd_puts(0, y++, "Current time"); |
| } |
| else { |
| t = global_settings.topruntime; |
| lcd_puts(0, y++, "Top time"); |
| } |
| |
| snprintf(s, sizeof(s), "%dh %dm %ds", |
| t / 3600, (t % 3600) / 60, t % 60); |
| lcd_puts(0, y++, s); |
| lcd_update(); |
| |
| /* Wait for a key to be pushed */ |
| key = button_get_w_tmo(HZ); |
| switch(key) { |
| case SETTINGS_CANCEL: |
| done = true; |
| break; |
| |
| case SETTINGS_INC: |
| case SETTINGS_DEC: |
| if (state == 1) |
| state = 2; |
| else |
| state = 1; |
| break; |
| |
| case SETTINGS_OK: |
| lcd_clear_display(); |
| lcd_puts(0,0,"Clear time?"); |
| lcd_puts(0,1,"PLAY = Yes"); |
| lcd_update(); |
| while (1) { |
| key = button_get(true); |
| if ( key == SETTINGS_OK ) { |
| if ( state == 1 ) |
| global_settings.runtime = 0; |
| else |
| global_settings.topruntime = 0; |
| break; |
| } |
| if (!(key & BUTTON_REL)) /* ignore button releases */ |
| break; |
| } |
| break; |
| } |
| } |
| |
| return false; |
| } |
| |
| #ifdef HAVE_MMC |
| bool dbg_mmc_info(void) |
| { |
| bool done = false; |
| int currval = 0; |
| tCardInfo *card; |
| unsigned char pbuf[32], pbuf2[32]; |
| unsigned char card_name[7]; |
| |
| static const unsigned char i_vmin[] = { 0, 1, 5, 10, 25, 35, 60, 100 }; |
| static const unsigned char i_vmax[] = { 1, 5, 10, 25, 35, 45, 80, 200 }; |
| static const unsigned char *kbit_units[] = { "kBit/s", "MBit/s", "GBit/s" }; |
| static const unsigned char *nsec_units[] = { "ns", "µs", "ms" }; |
| |
| card_name[6] = '\0'; |
| |
| lcd_setmargins(0, 0); |
| lcd_setfont(FONT_SYSFIXED); |
| |
| while (!done) |
| { |
| card = mmc_card_info(currval / 2); |
| |
| lcd_clear_display(); |
| snprintf(pbuf, sizeof(pbuf), "[MMC%d p%d]", currval / 2, |
| (currval % 2) + 1); |
| lcd_puts(0, 0, pbuf); |
| |
| if (card->initialized) |
| { |
| if (!(currval % 2)) /* General info */ |
| { |
| strncpy(card_name, ((unsigned char*)card->cid) + 3, 6); |
| snprintf(pbuf, sizeof(pbuf), "%s Rev %d.%d", card_name, |
| (int) mmc_extract_bits(card->cid, 72, 4), |
| (int) mmc_extract_bits(card->cid, 76, 4)); |
| lcd_puts(0, 1, pbuf); |
| snprintf(pbuf, sizeof(pbuf), "Prod: %d/%d", |
| (int) mmc_extract_bits(card->cid, 112, 4), |
| (int) mmc_extract_bits(card->cid, 116, 4) + 1997); |
| lcd_puts(0, 2, pbuf); |
| snprintf(pbuf, sizeof(pbuf), "Ser#: 0x%08lx", |
| mmc_extract_bits(card->cid, 80, 32)); |
| lcd_puts(0, 3, pbuf); |
| snprintf(pbuf, sizeof(pbuf), "M=%02x, O=%04x", |
| (int) mmc_extract_bits(card->cid, 0, 8), |
| (int) mmc_extract_bits(card->cid, 8, 16)); |
| lcd_puts(0, 4, pbuf); |
| snprintf(pbuf, sizeof(pbuf), "Blocks: 0x%06lx", card->numblocks); |
| lcd_puts(0, 5, pbuf); |
| snprintf(pbuf, sizeof(pbuf), "Blksz.: %d", card->blocksize); |
| lcd_puts(0, 6, pbuf); |
| } |
| else /* Technical details */ |
| { |
| output_dyn_value(pbuf2, sizeof pbuf2, card->speed / 1000, |
| kbit_units, false); |
| snprintf(pbuf, sizeof pbuf, "Speed: %s", pbuf2); |
| lcd_puts(0, 1, pbuf); |
| |
| output_dyn_value(pbuf2, sizeof pbuf2, card->tsac, |
| nsec_units, false); |
| snprintf(pbuf, sizeof pbuf, "Tsac: %s", pbuf2); |
| lcd_puts(0, 2, pbuf); |
| |
| snprintf(pbuf, sizeof(pbuf), "Nsac: %d clk", card->nsac); |
| lcd_puts(0, 3, pbuf); |
| snprintf(pbuf, sizeof(pbuf), "R2W: *%d", card->r2w_factor); |
| lcd_puts(0, 4, pbuf); |
| snprintf(pbuf, sizeof(pbuf), "IRmax: %d..%d mA", |
| i_vmin[mmc_extract_bits(card->csd, 66, 3)], |
| i_vmax[mmc_extract_bits(card->csd, 69, 3)]); |
| lcd_puts(0, 5, pbuf); |
| snprintf(pbuf, sizeof(pbuf), "IWmax: %d..%d mA", |
| i_vmin[mmc_extract_bits(card->csd, 72, 3)], |
| i_vmax[mmc_extract_bits(card->csd, 75, 3)]); |
| lcd_puts(0, 6, pbuf); |
| } |
| } |
| else |
| lcd_puts(0, 1, "Not found!"); |
| |
| lcd_update(); |
| |
| switch (button_get_w_tmo(HZ/2)) |
| { |
| case SETTINGS_OK: |
| case SETTINGS_CANCEL: |
| done = true; |
| break; |
| |
| case SETTINGS_DEC: |
| currval--; |
| if (currval < 0) |
| currval = 3; |
| break; |
| |
| case SETTINGS_INC: |
| currval++; |
| if (currval > 3) |
| currval = 0; |
| break; |
| } |
| } |
| |
| return false; |
| } |
| #else /* !HAVE_MMC */ |
| static bool dbg_disk_info(void) |
| { |
| char buf[128]; |
| bool done = false; |
| int i; |
| int page = 0; |
| const int max_page = 11; |
| unsigned short* identify_info = ata_get_identify(); |
| bool timing_info_present = false; |
| char pio3[2], pio4[2]; |
| |
| #ifdef HAVE_LCD_BITMAP |
| lcd_setmargins(0, 0); |
| #endif |
| |
| while(!done) |
| { |
| int y=0; |
| int key; |
| lcd_clear_display(); |
| #ifdef HAVE_LCD_BITMAP |
| lcd_puts(0, y++, "Disk info:"); |
| y++; |
| #endif |
| |
| switch (page) { |
| case 0: |
| for (i=0; i < 20; i++) |
| ((unsigned short*)buf)[i]=htobe16(identify_info[i+27]); |
| buf[40]=0; |
| /* kill trailing space */ |
| for (i=39; i && buf[i]==' '; i--) |
| buf[i] = 0; |
| lcd_puts(0, y++, "Model"); |
| lcd_puts_scroll(0, y++, buf); |
| break; |
| |
| case 1: |
| for (i=0; i < 4; i++) |
| ((unsigned short*)buf)[i]=htobe16(identify_info[i+23]); |
| buf[8]=0; |
| lcd_puts(0, y++, "Firmware"); |
| lcd_puts(0, y++, buf); |
| break; |
| |
| case 2: |
| snprintf(buf, sizeof buf, "%ld MB", |
| ((unsigned long)identify_info[61] << 16 | |
| (unsigned long)identify_info[60]) / 2048 ); |
| lcd_puts(0, y++, "Size"); |
| lcd_puts(0, y++, buf); |
| break; |
| |
| case 3: { |
| unsigned long free; |
| fat_size( IF_MV2(0,) NULL, &free ); |
| snprintf(buf, sizeof buf, "%ld MB", free / 1024 ); |
| lcd_puts(0, y++, "Free"); |
| lcd_puts(0, y++, buf); |
| break; |
| } |
| |
| case 4: |
| snprintf(buf, sizeof buf, "%d ms", ata_spinup_time * (1000/HZ)); |
| lcd_puts(0, y++, "Spinup time"); |
| lcd_puts(0, y++, buf); |
| break; |
| |
| case 5: |
| i = identify_info[83] & (1<<3); |
| lcd_puts(0, y++, "Power mgmt:"); |
| lcd_puts(0, y++, i ? "enabled" : "unsupported"); |
| break; |
| |
| case 6: |
| i = identify_info[83] & (1<<9); |
| lcd_puts(0, y++, "Noise mgmt:"); |
| lcd_puts(0, y++, i ? "enabled" : "unsupported"); |
| break; |
| |
| case 7: |
| i = identify_info[82] & (1<<6); |
| lcd_puts(0, y++, "Read-ahead:"); |
| lcd_puts(0, y++, i ? "enabled" : "unsupported"); |
| break; |
| |
| case 8: |
| timing_info_present = identify_info[53] & (1<<1); |
| if(timing_info_present) { |
| pio3[1] = 0; |
| pio4[1] = 0; |
| lcd_puts(0, y++, "PIO modes:"); |
| pio3[0] = (identify_info[64] & (1<<0)) ? '3' : 0; |
| pio4[0] = (identify_info[64] & (1<<1)) ? '4' : 0; |
| snprintf(buf, 128, "0 1 2 %s %s", pio3, pio4); |
| lcd_puts(0, y++, buf); |
| } else { |
| lcd_puts(0, y++, "No PIO mode info"); |
| } |
| break; |
| |
| case 9: |
| timing_info_present = identify_info[53] & (1<<1); |
| if(timing_info_present) { |
| lcd_puts(0, y++, "Cycle times"); |
| snprintf(buf, 128, "%dns/%dns", |
| identify_info[67], |
| identify_info[68]); |
| lcd_puts(0, y++, buf); |
| } else { |
| lcd_puts(0, y++, "No timing info"); |
| } |
| break; |
| |
| case 10: |
| timing_info_present = identify_info[53] & (1<<1); |
| if(timing_info_present) { |
| i = identify_info[49] & (1<<11); |
| snprintf(buf, 128, "IORDY support: %s", i ? "yes" : "no"); |
| lcd_puts(0, y++, buf); |
| i = identify_info[49] & (1<<10); |
| snprintf(buf, 128, "IORDY disable: %s", i ? "yes" : "no"); |
| lcd_puts(0, y++, buf); |
| } else { |
| lcd_puts(0, y++, "No timing info"); |
| } |
| break; |
| |
| case 11: |
| lcd_puts(0, y++, "Cluster size"); |
| snprintf(buf, 128, "%d bytes", fat_get_cluster_size(IF_MV(0))); |
| lcd_puts(0, y++, buf); |
| break; |
| } |
| lcd_update(); |
| |
| /* Wait for a key to be pushed */ |
| key = button_get_w_tmo(HZ*5); |
| switch(key) { |
| case SETTINGS_CANCEL: |
| done = true; |
| break; |
| |
| case SETTINGS_DEC: |
| if (--page < 0) |
| page = max_page; |
| break; |
| |
| case SETTINGS_INC: |
| if (++page > max_page) |
| page = 0; |
| break; |
| |
| case SETTINGS_OK: |
| if (page == 3) { |
| audio_stop(); /* stop playback, to avoid disk access */ |
| lcd_clear_display(); |
| lcd_puts(0,0,"Scanning"); |
| lcd_puts(0,1,"disk..."); |
| lcd_update(); |
| fat_recalc_free(IF_MV(0)); |
| } |
| break; |
| } |
| lcd_stop_scroll(); |
| } |
| |
| return false; |
| } |
| #endif /* !HAVE_MMC */ |
| |
| #ifdef HAVE_DIRCACHE |
| static bool dbg_dircache_info(void) |
| { |
| bool done = false; |
| int line; |
| char buf[32]; |
| |
| lcd_setmargins(0, 0); |
| lcd_setfont(FONT_SYSFIXED); |
| |
| while (!done) |
| { |
| line = 0; |
| |
| lcd_clear_display(); |
| snprintf(buf, sizeof(buf), "Cache initialized: %s", |
| dircache_is_enabled() ? "Yes" : "No"); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "Cache size: %d B", |
| dircache_get_cache_size()); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "Last size: %d B", |
| global_settings.dircache_size); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "Limit: %d B", DIRCACHE_LIMIT); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "Reserve: %d/%d B", |
| dircache_get_reserve_used(), DIRCACHE_RESERVE); |
| lcd_puts(0, line++, buf); |
| |
| snprintf(buf, sizeof(buf), "Scanning took: %d s", |
| dircache_get_build_ticks() / HZ); |
| lcd_puts(0, line++, buf); |
| |
| lcd_update(); |
| |
| switch (button_get_w_tmo(HZ/2)) |
| { |
| case SETTINGS_OK: |
| case SETTINGS_CANCEL: |
| done = true; |
| break; |
| } |
| } |
| |
| return false; |
| } |
| |
| #endif /* HAVE_DIRCACHE */ |
| |
| #if CONFIG_CPU == SH7034 |
| bool dbg_save_roms(void) |
| { |
| int fd; |
| int oldmode = system_memory_guard(MEMGUARD_NONE); |
| |
| fd = creat("/internal_rom_0000-FFFF.bin", O_WRONLY); |
| if(fd >= 0) |
| { |
| write(fd, (void *)0, 0x10000); |
| close(fd); |
| } |
| |
| fd = creat("/internal_rom_2000000-203FFFF.bin", O_WRONLY); |
| if(fd >= 0) |
| { |
| write(fd, (void *)0x2000000, 0x40000); |
| close(fd); |
| } |
| |
| system_memory_guard(oldmode); |
| return false; |
| } |
| #elif defined CPU_COLDFIRE |
| bool dbg_save_roms(void) |
| { |
| int fd; |
| int oldmode = system_memory_guard(MEMGUARD_NONE); |
| |
| #if defined(IRIVER_H100_SERIES) |
| fd = creat("/internal_rom_000000-1FFFFF.bin", O_WRONLY); |
| #elif defined(IRIVER_H300_SERIES) |
| fd = creat("/internal_rom_000000-3FFFFF.bin", O_WRONLY); |
| #endif |
| if(fd >= 0) |
| { |
| write(fd, (void *)0, FLASH_SIZE); |
| close(fd); |
| } |
| system_memory_guard(oldmode); |
| return false; |
| } |
| #endif /* CPU */ |
| |
| #ifdef CONFIG_TUNER |
| bool dbg_fm_radio(void) |
| { |
| char buf[32]; |
| int button; |
| bool fm_detected; |
| |
| #ifdef HAVE_LCD_BITMAP |
| lcd_setmargins(0, 0); |
| #endif |
| |
| while(1) |
| { |
| lcd_clear_display(); |
| fm_detected = radio_hardware_present(); |
| |
| snprintf(buf, sizeof buf, "HW detected: %s", fm_detected?"yes":"no"); |
| lcd_puts(0, 0, buf); |
| lcd_update(); |
| |
| button = button_get(true); |
| |
| switch(button) |
| { |
| case SETTINGS_CANCEL: |
| return false; |
| } |
| } |
| return false; |
| } |
| #endif /* CONFIG_TUNER */ |
| |
| #ifdef HAVE_LCD_BITMAP |
| extern bool do_screendump_instead_of_usb; |
| |
| bool dbg_screendump(void) |
| { |
| do_screendump_instead_of_usb = !do_screendump_instead_of_usb; |
| gui_syncsplash(HZ, true, "Screendump %s", |
| do_screendump_instead_of_usb?"enabled":"disabled"); |
| return false; |
| } |
| #endif /* HAVE_LCD_BITMAP */ |
| |
| #if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) |
| bool dbg_set_memory_guard(void) |
| { |
| static const struct opt_items names[MAXMEMGUARD] = { |
| { "None", -1 }, |
| { "Flash ROM writes", -1 }, |
| { "Zero area (all)", -1 } |
| }; |
| int mode = system_memory_guard(MEMGUARD_KEEP); |
| |
| set_option( "Catch mem accesses", &mode, INT, names, MAXMEMGUARD, NULL); |
| system_memory_guard(mode); |
| |
| return false; |
| } |
| #endif /* CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) */ |
| |
| bool debug_menu(void) |
| { |
| int m; |
| bool result; |
| |
| static const struct menu_item items[] = { |
| #if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) |
| { "Dump ROM contents", dbg_save_roms }, |
| #endif |
| #if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) || (CONFIG_CPU == PP5020) |
| { "View I/O ports", dbg_ports }, |
| #endif |
| #ifdef HAVE_ADJUSTABLE_CPU_FREQ |
| { "CPU frequency", dbg_cpufreq }, |
| #endif |
| #if defined(IRIVER_H100_SERIES) && !defined(SIMULATOR) |
| { "S/PDIF analyzer", dbg_spdif }, |
| #endif |
| #if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) |
| { "Catch mem accesses", dbg_set_memory_guard }, |
| #endif |
| { "View OS stacks", dbg_os }, |
| #ifdef HAVE_LCD_BITMAP |
| { "View battery", view_battery }, |
| { "Screendump", dbg_screendump }, |
| #endif |
| { "View HW info", dbg_hw_info }, |
| { "View partitions", dbg_partitions }, |
| #ifdef HAVE_MMC |
| { "View MMC info", dbg_mmc_info }, |
| #else |
| { "View disk info", dbg_disk_info }, |
| #endif |
| #ifdef HAVE_DIRCACHE |
| { "View dircache info", dbg_dircache_info }, |
| #endif |
| #ifdef HAVE_LCD_BITMAP |
| { "View audio thread", dbg_audio_thread }, |
| #ifdef PM_DEBUG |
| { "pm histogram", peak_meter_histogram}, |
| #endif /* PM_DEBUG */ |
| #endif /* HAVE_LCD_BITMAP */ |
| { "View runtime", view_runtime }, |
| #ifdef CONFIG_TUNER |
| { "FM Radio", dbg_fm_radio }, |
| #endif |
| #ifdef ROCKBOX_HAS_LOGF |
| {"logf", logfdisplay }, |
| {"logfdump", logfdump }, |
| #endif |
| }; |
| |
| m=menu_init( items, sizeof items / sizeof(struct menu_item), NULL, |
| NULL, NULL, NULL); |
| result = menu_run(m); |
| menu_exit(m); |
| |
| return result; |
| } |
| |
| #endif /* SIMULATOR */ |