blob: 35b6175227fa8f7222189a5c4e9d78a843824d3f [file] [log] [blame]
/*
* This config file is for toshiba Gigabeat F
*/
#define TARGET_TREE /* this target is using the target tree system */
#define TOSHIBA_GIGABEAT_F 1
/* For Rolo and boot loader */
#define MODEL_NUMBER 18
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
/* LCD dimensions */
#define LCD_WIDTH 240
#define LCD_HEIGHT 320
#define LCD_DEPTH 16 /* 65k colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
#define CONFIG_KEYPAD GIGABEAT_PAD
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_S3C2440
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_LCD_ENABLE
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 0 /* 0.5 mA */
#define MIN_ACTIVE_BRIGHTNESS_SETTING 16 /* lowest active brightness */
#define MAX_DIM_BRIGHTNESS_SETTING 15 /* highest 'dimness' */
#define MAX_BRIGHTNESS_SETTING 63 /* 32 mA */
#define DEFAULT_BRIGHTNESS_SETTING 39 /* 20 mA */
#define DEFAULT_DIMNESS_SETTING 9 /* 5 mA */
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x80000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* Define this if you have the WM8975 audio codec */
#define HAVE_WM8751
#define BATTERY_CAPACITY_DEFAULT 2000 /* default battery capacity */
#define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
SAMPR_CAP_11)
#ifndef SIMULATOR
/* The LCD on a Gigabeat is 240x320 - it is portrait */
#define HAVE_PORTRAIT_LCD
/* Define this if you have a Motorola SCF5249 */
#define CONFIG_CPU S3C2440
/* Define this if you want to use coldfire's i2c interface */
#define CONFIG_I2C I2C_S3C2440
/* Type of mobile power - check this out */
#define CONFIG_BATTERY BATT_LIION830 /* could change this later */
#define BATTERY_CAPACITY_MIN 1500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 2500 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 25 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* ADC[0] is (530) at discharge and 625 at full charge */
#define BATTERY_SCALE_FACTOR 6450
/* Hardware controlled charging with monitoring */
#define CONFIG_CHARGING CHARGING_MONITOR
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The size of the flash ROM */
#define FLASH_SIZE 0x400000
/* Define this to the CPU frequency */
#define CPU_FREQ 16934400
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Virtual LED (icon) */
#define CONFIG_LED LED_VIRTUAL
#define CONFIG_LCD LCD_GIGABEAT
/* define this if the backlight can be set to a brightness */
#define HAVE_BACKLIGHT_SET_FADING
#define __BACKLIGHT_INIT
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
#define HAVE_HEADPHONE_DETECTION
/* Define this if you have adjustable CPU frequency */
/* #define HAVE_ADJUSTABLE_CPU_FREQ */
#define BOOTFILE_EXT "gigabeat"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#endif