| /*************************************************************************** |
| * __________ __ ___. |
| * Open \______ \ ____ ____ | | _\_ |__ _______ ___ |
| * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / |
| * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < |
| * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ |
| * \/ \/ \/ \/ \/ |
| * $Id$ |
| * |
| * Copyright (C) 2005 by Linus Nielsen Feltzing |
| * |
| * All files in this archive are subject to the GNU General Public License. |
| * See the file COPYING in the source tree root for full license agreement. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ****************************************************************************/ |
| #include "config.h" |
| |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include "inttypes.h" |
| #include "string.h" |
| #include "cpu.h" |
| #include "system.h" |
| #include "lcd.h" |
| #include "lcd-remote.h" |
| #include "scroll_engine.h" |
| #include "kernel.h" |
| #include "thread.h" |
| #include "ata.h" |
| #include "usb.h" |
| #include "disk.h" |
| #include "font.h" |
| #include "adc.h" |
| #include "backlight.h" |
| #include "backlight-target.h" |
| #include "button.h" |
| #include "panic.h" |
| #include "power.h" |
| #include "powermgmt.h" |
| #include "file.h" |
| #include "eeprom_settings.h" |
| #include "rbunicode.h" |
| #include "common.h" |
| |
| #include <stdarg.h> |
| |
| /* Maximum allowed firmware image size. 10MB is more than enough */ |
| #define MAX_LOADSIZE (10*1024*1024) |
| |
| #define DRAM_START 0x31000000 |
| |
| #ifdef HAVE_EEPROM_SETTINGS |
| static bool recovery_mode = false; |
| #endif |
| |
| char version[] = APPSVERSION; |
| |
| /* Reset the cookie for the crt0 crash check */ |
| inline void __reset_cookie(void) |
| { |
| asm(" move.l #0,%d0"); |
| asm(" move.l %d0,0x10017ffc"); |
| } |
| |
| void start_iriver_fw(void) |
| { |
| asm(" move.w #0x2700,%sr"); |
| __reset_cookie(); |
| asm(" movec.l %d0,%vbr"); |
| asm(" move.l 0,%sp"); |
| asm(" lea.l 8,%a0"); |
| asm(" jmp (%a0)"); |
| } |
| |
| void start_firmware(void) |
| { |
| asm(" move.w #0x2700,%sr"); |
| __reset_cookie(); |
| asm(" move.l %0,%%d0" :: "i"(DRAM_START)); |
| asm(" movec.l %d0,%vbr"); |
| asm(" move.l %0,%%sp" :: "m"(*(int *)DRAM_START)); |
| asm(" move.l %0,%%a0" :: "m"(*(int *)(DRAM_START+4))); |
| asm(" jmp (%a0)"); |
| } |
| |
| #ifdef IRIVER_H100_SERIES |
| void start_flashed_romimage(void) |
| { |
| uint8_t *src = (uint8_t *)FLASH_ROMIMAGE_ENTRY; |
| int *reset_vector; |
| |
| if (!detect_flashed_romimage()) |
| return ; |
| |
| reset_vector = (int *)(&src[sizeof(struct flash_header)+4]); |
| |
| asm(" move.w #0x2700,%sr"); |
| __reset_cookie(); |
| |
| asm(" move.l %0,%%d0" :: "i"(DRAM_START)); |
| asm(" movec.l %d0,%vbr"); |
| asm(" move.l %0,%%sp" :: "m"(reset_vector[0])); |
| asm(" move.l %0,%%a0" :: "m"(reset_vector[1])); |
| asm(" jmp (%a0)"); |
| |
| /* Failure */ |
| power_off(); |
| } |
| |
| void start_flashed_ramimage(void) |
| { |
| struct flash_header hdr; |
| unsigned char *buf = (unsigned char *)DRAM_START; |
| uint8_t *src = (uint8_t *)FLASH_RAMIMAGE_ENTRY; |
| |
| if (!detect_flashed_ramimage()) |
| return; |
| |
| /* Load firmware from flash */ |
| cpu_boost(true); |
| memcpy(&hdr, src, sizeof(struct flash_header)); |
| src += sizeof(struct flash_header); |
| memcpy(buf, src, hdr.length); |
| cpu_boost(false); |
| |
| start_firmware(); |
| |
| /* Failure */ |
| power_off(); |
| } |
| #endif /* IRIVER_H100_SERIES */ |
| |
| void shutdown(void) |
| { |
| printf("Shutting down..."); |
| #ifdef HAVE_EEPROM_SETTINGS |
| /* Reset the rockbox crash check. */ |
| firmware_settings.bl_version = 0; |
| eeprom_settings_store(); |
| #endif |
| |
| /* We need to gracefully spin down the disk to prevent clicks. */ |
| if (ide_powered()) |
| { |
| /* Make sure ATA has been initialized. */ |
| ata_init(); |
| |
| /* And put the disk into sleep immediately. */ |
| ata_sleepnow(); |
| } |
| |
| sleep(HZ*2); |
| |
| /* Backlight OFF */ |
| _backlight_off(); |
| #ifdef HAVE_REMOTE_LCD |
| _remote_backlight_off(); |
| #endif |
| |
| __reset_cookie(); |
| power_off(); |
| } |
| |
| /* Print the battery voltage (and a warning message). */ |
| void check_battery(void) |
| { |
| int battery_voltage, batt_int, batt_frac; |
| |
| battery_voltage = battery_adc_voltage(); |
| batt_int = battery_voltage / 1000; |
| batt_frac = (battery_voltage % 1000) / 10; |
| |
| printf("Batt: %d.%02dV", batt_int, batt_frac); |
| |
| if (battery_voltage <= 310) |
| { |
| printf("WARNING! BATTERY LOW!!"); |
| sleep(HZ*2); |
| } |
| } |
| |
| #ifdef HAVE_EEPROM_SETTINGS |
| void initialize_eeprom(void) |
| { |
| if (detect_original_firmware()) |
| return ; |
| |
| if (!eeprom_settings_init()) |
| { |
| recovery_mode = true; |
| return ; |
| } |
| |
| /* If bootloader version has not been reset, disk might |
| * not be intact. */ |
| if (firmware_settings.bl_version || !firmware_settings.disk_clean) |
| { |
| firmware_settings.disk_clean = false; |
| recovery_mode = true; |
| } |
| |
| firmware_settings.bl_version = EEPROM_SETTINGS_BL_MINVER; |
| eeprom_settings_store(); |
| } |
| |
| void try_flashboot(void) |
| { |
| if (!firmware_settings.initialized) |
| return ; |
| |
| switch (firmware_settings.bootmethod) |
| { |
| case BOOT_DISK: |
| return; |
| |
| case BOOT_ROM: |
| start_flashed_romimage(); |
| recovery_mode = true; |
| break; |
| |
| case BOOT_RAM: |
| start_flashed_ramimage(); |
| recovery_mode = true; |
| break; |
| |
| default: |
| recovery_mode = true; |
| return; |
| } |
| } |
| |
| static const char *options[] = { |
| "Boot from disk", |
| "Boot RAM image", |
| "Boot ROM image", |
| "Shutdown" |
| }; |
| |
| #define FAILSAFE_OPTIONS 4 |
| #define TIMEOUT (15*HZ) |
| void failsafe_menu(void) |
| { |
| long start_tick = current_tick; |
| int option = 3; |
| int button; |
| int defopt = -1; |
| char buf[32]; |
| int i; |
| extern int line; |
| |
| reset_screen(); |
| printf("Bootloader %s", version); |
| check_battery(); |
| printf("========================="); |
| line += FAILSAFE_OPTIONS; |
| printf(""); |
| printf(" [NAVI] to confirm."); |
| printf(" [REC] to set as default."); |
| printf(""); |
| |
| if (firmware_settings.initialized) |
| { |
| defopt = firmware_settings.bootmethod; |
| if (defopt < 0 || defopt >= FAILSAFE_OPTIONS) |
| defopt = option; |
| } |
| |
| while (current_tick - start_tick < TIMEOUT) |
| { |
| /* Draw the menu. */ |
| line = 3; |
| for (i = 0; i < FAILSAFE_OPTIONS; i++) |
| { |
| char *def = "[DEF]"; |
| char *arrow = "->"; |
| |
| if (i != defopt) |
| def = ""; |
| if (i != option) |
| arrow = " "; |
| |
| printf("%s %s %s", arrow, options[i], def); |
| } |
| |
| snprintf(buf, sizeof(buf), "Time left: %ds", |
| (TIMEOUT - (current_tick - start_tick)) / HZ); |
| lcd_puts(0, 10, buf); |
| lcd_update(); |
| button = button_get_w_tmo(HZ); |
| |
| if (button == BUTTON_NONE || button & SYS_EVENT) |
| continue ; |
| |
| start_tick = current_tick; |
| |
| /* Ignore the ON/PLAY -button because it can cause trouble |
| with the RTC alarm mod. */ |
| switch (button & ~(BUTTON_ON)) |
| { |
| case BUTTON_UP: |
| case BUTTON_RC_REW: |
| if (option > 0) |
| option--; |
| break ; |
| |
| case BUTTON_DOWN: |
| case BUTTON_RC_FF: |
| if (option < FAILSAFE_OPTIONS-1) |
| option++; |
| break ; |
| |
| case BUTTON_SELECT: |
| case BUTTON_RC_ON: |
| goto execute; |
| |
| case BUTTON_REC: |
| case BUTTON_RC_REC: |
| if (firmware_settings.initialized) |
| { |
| firmware_settings.bootmethod = option; |
| eeprom_settings_store(); |
| defopt = option; |
| } |
| break ; |
| } |
| } |
| |
| execute: |
| |
| lcd_puts(0, 10, "Executing command..."); |
| lcd_update(); |
| sleep(HZ); |
| reset_screen(); |
| |
| switch (option) |
| { |
| case BOOT_DISK: |
| return ; |
| |
| case BOOT_RAM: |
| start_flashed_ramimage(); |
| printf("Image not found"); |
| break; |
| |
| case BOOT_ROM: |
| start_flashed_romimage(); |
| printf("Image not found"); |
| break; |
| } |
| |
| shutdown(); |
| } |
| #endif |
| |
| /* get rid of a nasty humming sound during boot |
| -> RESET signal */ |
| inline static void __uda1380_reset_hi(void) |
| { |
| #ifdef HAVE_UDA1380 |
| or_l(1<<29, &GPIO_OUT); |
| or_l(1<<29, &GPIO_ENABLE); |
| or_l(1<<29, &GPIO_FUNCTION); |
| #endif |
| } |
| |
| inline static void __uda1380_reset_lo(void) |
| { |
| #ifdef HAVE_UDA1380 |
| and_l(~(1<<29), &GPIO_OUT); |
| #endif |
| } |
| |
| void main(void) |
| { |
| int i; |
| int rc; |
| bool rc_on_button = false; |
| bool on_button = false; |
| bool rec_button = false; |
| bool hold_status = false; |
| int data; |
| extern int line; /* From common.c */ |
| extern int remote_line; /* From common.c */ |
| |
| /* We want to read the buttons as early as possible, before the user |
| releases the ON button */ |
| |
| /* Set GPIO33, GPIO37, GPIO38 and GPIO52 as general purpose inputs |
| (The ON and Hold buttons on the main unit and the remote) */ |
| or_l(0x00100062, &GPIO1_FUNCTION); |
| and_l(~0x00100062, &GPIO1_ENABLE); |
| |
| data = GPIO1_READ; |
| if ((data & 0x20) == 0) |
| on_button = true; |
| |
| if ((data & 0x40) == 0) |
| rc_on_button = true; |
| |
| /* Set the default state of the hard drive power to OFF */ |
| ide_power_enable(false); |
| |
| power_init(); |
| |
| /* Turn off if neither ON button is pressed */ |
| if (!(on_button || rc_on_button)) |
| { |
| __reset_cookie(); |
| power_off(); |
| } |
| |
| __uda1380_reset_hi(); |
| |
| /* Start with the main backlight OFF. */ |
| _backlight_init(); |
| _backlight_off(); |
| |
| /* Remote backlight ON */ |
| #ifdef HAVE_REMOTE_LCD |
| _remote_backlight_on(); |
| #endif |
| |
| system_init(); |
| kernel_init(); |
| |
| __uda1380_reset_lo(); |
| |
| #ifdef HAVE_ADJUSTABLE_CPU_FREQ |
| /* Set up waitstates for the peripherals */ |
| set_cpu_frequency(0); /* PLL off */ |
| #ifdef CPU_COLDFIRE |
| coldfire_set_pllcr_audio_bits(DEFAULT_PLLCR_AUDIO_BITS); |
| #endif |
| #endif |
| set_irq_level(0); |
| |
| #ifdef HAVE_EEPROM_SETTINGS |
| initialize_eeprom(); |
| #endif |
| |
| usb_init(); |
| /* A small delay after usb_init is necessary to read the I/O port correctly |
| (if ports are read _immediately_ after the init). */ |
| /* sleep(1); */ |
| |
| adc_init(); |
| button_init(); |
| |
| /* Only check remote hold status if remote power button was actually used. */ |
| if (rc_on_button) |
| { |
| lcd_remote_init(); |
| |
| /* Allow the button driver to check the buttons */ |
| sleep(HZ/50); |
| |
| if (remote_button_hold()) |
| hold_status = true; |
| } |
| |
| /* Check main hold switch status too. */ |
| if (on_button && button_hold()) |
| { |
| hold_status = true; |
| } |
| |
| /* Power on the hard drive early, to speed up the loading. */ |
| if (!hold_status |
| # ifdef HAVE_EEPROM_SETTINGS |
| && !recovery_mode |
| # endif |
| ) |
| { |
| ide_power_enable(true); |
| } |
| |
| # ifdef HAVE_EEPROM_SETTINGS |
| if (!hold_status && (usb_detect() != USB_INSERTED) && !recovery_mode) |
| try_flashboot(); |
| # endif |
| |
| backlight_init(); |
| |
| |
| lcd_init(); |
| |
| if (!rc_on_button) |
| lcd_remote_init(); |
| |
| /* Bootloader uses simplified backlight thread, so we need to enable |
| remote display here. */ |
| if (remote_detect()) |
| lcd_remote_on(); |
| |
| font_init(); |
| |
| lcd_setfont(FONT_SYSFIXED); |
| |
| printf("Rockbox boot loader"); |
| printf("Version %s", version); |
| |
| /* No need to wait here more because lcd_init and others already do that. */ |
| // sleep(HZ/50); /* Allow the button driver to check the buttons */ |
| rec_button = ((button_status() & BUTTON_REC) == BUTTON_REC) |
| || ((button_status() & BUTTON_RC_REC) == BUTTON_RC_REC); |
| |
| check_battery(); |
| |
| /* Don't start if the Hold button is active on the device you |
| are starting with */ |
| if ((usb_detect() != USB_INSERTED) && (hold_status |
| #ifdef HAVE_EEPROM_SETTINGS |
| || recovery_mode |
| #endif |
| )) |
| { |
| if (detect_original_firmware()) |
| { |
| printf("Hold switch on"); |
| shutdown(); |
| } |
| |
| #ifdef HAVE_EEPROM_SETTINGS |
| failsafe_menu(); |
| #endif |
| } |
| |
| /* Holding REC while starting runs the original firmware */ |
| if (detect_original_firmware() && rec_button) |
| { |
| printf("Starting original firmware..."); |
| start_iriver_fw(); |
| } |
| |
| /* A hack to enter USB mode without using the USB thread */ |
| if(usb_detect() == USB_INSERTED) |
| { |
| const char msg[] = "Bootloader USB mode"; |
| int w, h; |
| font_getstringsize(msg, &w, &h, FONT_SYSFIXED); |
| reset_screen(); |
| lcd_putsxy((LCD_WIDTH-w)/2, (LCD_HEIGHT-h)/2, msg); |
| lcd_update(); |
| |
| #ifdef HAVE_REMOTE_LCD |
| lcd_remote_puts(0, 3, msg); |
| lcd_remote_update(); |
| #endif |
| |
| #ifdef HAVE_EEPROM_SETTINGS |
| if (firmware_settings.initialized) |
| { |
| firmware_settings.disk_clean = false; |
| eeprom_settings_store(); |
| } |
| #endif |
| ide_power_enable(true); |
| ata_enable(false); |
| sleep(HZ/20); |
| usb_enable(true); |
| cpu_idle_mode(true); |
| while (usb_detect() == USB_INSERTED) |
| { |
| /* Print the battery status. */ |
| line = 0; |
| remote_line = 0; |
| check_battery(); |
| |
| ata_spin(); /* Prevent the drive from spinning down */ |
| sleep(HZ); |
| |
| /* Backlight OFF */ |
| _backlight_off(); |
| } |
| |
| cpu_idle_mode(false); |
| usb_enable(false); |
| |
| reset_screen(); |
| lcd_update(); |
| } |
| |
| rc = ata_init(); |
| if(rc) |
| { |
| reset_screen(); |
| printf("ATA error: %d", rc); |
| printf("Insert USB cable and press"); |
| printf("a button"); |
| while(!(button_get(true) & BUTTON_REL)); |
| } |
| |
| |
| disk_init(); |
| |
| rc = disk_mount_all(); |
| if (rc<=0) |
| { |
| reset_screen(); |
| printf("No partition found"); |
| while(button_get(true) != SYS_USB_CONNECTED) {}; |
| } |
| |
| printf("Loading firmware"); |
| i = load_firmware((unsigned char *)DRAM_START, BOOTFILE, MAX_LOADSIZE); |
| if(i < 0) |
| printf("Error: %s", strerror(i)); |
| |
| if (i == EOK) |
| start_firmware(); |
| |
| if (!detect_original_firmware()) |
| { |
| printf("No firmware found on disk"); |
| sleep(HZ*2); |
| shutdown(); |
| } |
| else { |
| sleep(HZ*2); |
| start_iriver_fw(); |
| } |
| } |
| |
| /* These functions are present in the firmware library, but we reimplement |
| them here because the originals do a lot more than we want */ |
| void screen_dump(void) |
| { |
| } |
| |
| int usb_screen(void) |
| { |
| return 0; |
| } |
| |
| unsigned short *bidi_l2v(const unsigned char *str, int orientation) |
| { |
| static unsigned short utf16_buf[SCROLL_LINE_SIZE]; |
| unsigned short *target; |
| (void)orientation; |
| |
| target = utf16_buf; |
| |
| while (*str) |
| str = utf8decode(str, target++); |
| *target = 0; |
| return utf16_buf; |
| } |