| /*************************************************************************** |
| * __________ __ ___. |
| * Open \______ \ ____ ____ | | _\_ |__ _______ ___ |
| * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / |
| * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < |
| * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ |
| * \/ \/ \/ \/ \/ |
| * $Id$ |
| * |
| * Copyright (C) 2002 by Daniel Stenberg |
| * |
| * All files in this archive are subject to the GNU General Public License. |
| * See the file COPYING in the source tree root for full license agreement. |
| * |
| * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| * KIND, either express or implied. |
| * |
| ****************************************************************************/ |
| |
| /* |
| * Parts of this code has been stolen from the Ample project and was written |
| * by David Härdeman. It has since been extended and enhanced pretty much by |
| * all sorts of friendly Rockbox people. |
| * |
| * A nice reference for MPEG header info: |
| * http://rockbox.haxx.se/docs/mpeghdr.html |
| * |
| */ |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <stdbool.h> |
| #include "debug.h" |
| #include "logf.h" |
| #include "mp3data.h" |
| #include "file.h" |
| #include "buffer.h" |
| |
| #define DEBUG_VERBOSE |
| |
| #define BYTES2INT(b1,b2,b3,b4) (((long)(b1 & 0xFF) << (3*8)) | \ |
| ((long)(b2 & 0xFF) << (2*8)) | \ |
| ((long)(b3 & 0xFF) << (1*8)) | \ |
| ((long)(b4 & 0xFF) << (0*8))) |
| |
| #define SYNC_MASK (0x7ffL << 21) |
| #define VERSION_MASK (3L << 19) |
| #define LAYER_MASK (3L << 17) |
| #define PROTECTION_MASK (1L << 16) |
| #define BITRATE_MASK (0xfL << 12) |
| #define SAMPLERATE_MASK (3L << 10) |
| #define PADDING_MASK (1L << 9) |
| #define PRIVATE_MASK (1L << 8) |
| #define CHANNELMODE_MASK (3L << 6) |
| #define MODE_EXT_MASK (3L << 4) |
| #define COPYRIGHT_MASK (1L << 3) |
| #define ORIGINAL_MASK (1L << 2) |
| #define EMPHASIS_MASK 3L |
| |
| /* Table of bitrates for MP3 files, all values in kilo. |
| * Indexed by version, layer and value of bit 15-12 in header. |
| */ |
| const int bitrate_table[2][3][16] = |
| { |
| { |
| {0,32,64,96,128,160,192,224,256,288,320,352,384,416,448,0}, |
| {0,32,48,56, 64,80, 96, 112,128,160,192,224,256,320,384,0}, |
| {0,32,40,48, 56,64, 80, 96, 112,128,160,192,224,256,320,0} |
| }, |
| { |
| {0,32,48,56,64,80,96,112,128,144,160,176,192,224,256,0}, |
| {0, 8,16,24,32,40,48, 56, 64, 80, 96,112,128,144,160,0}, |
| {0, 8,16,24,32,40,48, 56, 64, 80, 96,112,128,144,160,0} |
| } |
| }; |
| |
| /* Table of samples per frame for MP3 files. |
| * Indexed by layer. Multiplied with 1000. |
| */ |
| const long bs[3] = {384000, 1152000, 1152000}; |
| |
| /* Table of sample frequency for MP3 files. |
| * Indexed by version and layer. |
| */ |
| |
| const int freqtab[][4] = |
| { |
| {11025, 12000, 8000, 0}, /* MPEG version 2.5 */ |
| {44100, 48000, 32000, 0}, /* MPEG Version 1 */ |
| {22050, 24000, 16000, 0}, /* MPEG version 2 */ |
| }; |
| |
| /* check if 'head' is a valid mp3 frame header */ |
| static bool is_mp3frameheader(unsigned long head) |
| { |
| if ((head & SYNC_MASK) != (unsigned long)SYNC_MASK) /* bad sync? */ |
| return false; |
| if ((head & VERSION_MASK) == (1L << 19)) /* bad version? */ |
| return false; |
| if (!(head & LAYER_MASK)) /* no layer? */ |
| return false; |
| #if CONFIG_HWCODEC != MASNONE |
| /* The MAS can't decode layer 1, so treat layer 1 data as invalid */ |
| if ((head & LAYER_MASK) == LAYER_MASK) |
| return false; |
| #endif |
| if ((head & BITRATE_MASK) == BITRATE_MASK) /* bad bitrate? */ |
| return false; |
| if (!(head & BITRATE_MASK)) /* no bitrate? */ |
| return false; |
| if ((head & SAMPLERATE_MASK) == SAMPLERATE_MASK) /* bad sample rate? */ |
| return false; |
| |
| return true; |
| } |
| |
| static bool mp3headerinfo(struct mp3info *info, unsigned long header) |
| { |
| int bittable = 0; |
| int bitindex; |
| int freqindex; |
| |
| /* MPEG Audio Version */ |
| switch(header & VERSION_MASK) { |
| case 0: |
| /* MPEG version 2.5 is not an official standard */ |
| info->version = MPEG_VERSION2_5; |
| bittable = MPEG_VERSION2 - 1; /* use the V2 bit rate table */ |
| break; |
| |
| case (1L << 19): |
| return false; |
| |
| case (2L << 19): |
| /* MPEG version 2 (ISO/IEC 13818-3) */ |
| info->version = MPEG_VERSION2; |
| bittable = MPEG_VERSION2 - 1; |
| break; |
| |
| case (3L << 19): |
| /* MPEG version 1 (ISO/IEC 11172-3) */ |
| info->version = MPEG_VERSION1; |
| bittable = MPEG_VERSION1 - 1; |
| break; |
| } |
| |
| switch(header & LAYER_MASK) { |
| case 0: |
| return false; |
| case (1L << 17): |
| info->layer = 2; |
| break; |
| case (2L << 17): |
| info->layer = 1; |
| break; |
| case (3L << 17): |
| info->layer = 0; |
| break; |
| } |
| |
| info->protection = (header & PROTECTION_MASK)?true:false; |
| |
| /* Bitrate */ |
| bitindex = (header & 0xf000) >> 12; |
| info->bitrate = bitrate_table[bittable][info->layer][bitindex]; |
| if(info->bitrate == 0) |
| return false; |
| |
| /* Sampling frequency */ |
| freqindex = (header & 0x0C00) >> 10; |
| info->frequency = freqtab[info->version][freqindex]; |
| if(info->frequency == 0) |
| return false; |
| |
| info->padding = (header & 0x0200)?1:0; |
| |
| /* Calculate number of bytes, calculation depends on layer */ |
| switch(info->layer) { |
| case 0: |
| info->frame_size = info->bitrate * 48000; |
| info->frame_size /= |
| freqtab[info->version][freqindex] << bittable; |
| break; |
| case 1: |
| case 2: |
| info->frame_size = info->bitrate * 144000; |
| info->frame_size /= |
| freqtab[info->version][freqindex] << bittable; |
| break; |
| default: |
| info->frame_size = 1; |
| } |
| |
| info->frame_size += info->padding; |
| |
| /* Calculate time per frame */ |
| info->frame_time = bs[info->layer] / |
| (freqtab[info->version][freqindex] << bittable); |
| |
| info->channel_mode = (header & 0xc0) >> 6; |
| info->mode_extension = (header & 0x30) >> 4; |
| info->emphasis = header & 3; |
| |
| #ifdef DEBUG_VERBOSE |
| DEBUGF( "Header: %08x, Ver %d, lay %d, bitr %d, freq %d, " |
| "chmode %d, mode_ext %d, emph %d, bytes: %d time: %d\n", |
| header, info->version, info->layer+1, info->bitrate, |
| info->frequency, info->channel_mode, info->mode_extension, |
| info->emphasis, info->frame_size, info->frame_time); |
| #endif |
| return true; |
| } |
| |
| static unsigned long __find_next_frame(int fd, long *offset, long max_offset, |
| unsigned long last_header, |
| int(*getfunc)(int fd, unsigned char *c)) |
| { |
| unsigned long header=0; |
| unsigned char tmp; |
| int i; |
| |
| long pos = 0; |
| |
| /* We remember the last header we found, to use as a template to see if |
| the header we find has the same frequency, layer etc */ |
| last_header &= 0xffff0c00; |
| |
| /* Fill up header with first 24 bits */ |
| for(i = 0; i < 3; i++) { |
| header <<= 8; |
| if(!getfunc(fd, &tmp)) |
| return 0; |
| header |= tmp; |
| pos++; |
| } |
| |
| do { |
| header <<= 8; |
| if(!getfunc(fd, &tmp)) |
| return 0; |
| header |= tmp; |
| pos++; |
| if(max_offset > 0 && pos > max_offset) |
| return 0; |
| } while(!is_mp3frameheader(header) || |
| (last_header?((header & 0xffff0c00) != last_header):false)); |
| |
| *offset = pos - 4; |
| |
| #if defined(DEBUG) || defined(SIMULATOR) |
| if(*offset) |
| DEBUGF("Warning: skipping %d bytes of garbage\n", *offset); |
| #endif |
| |
| return header; |
| } |
| |
| static int fileread(int fd, unsigned char *c) |
| { |
| return read(fd, c, 1); |
| } |
| |
| unsigned long find_next_frame(int fd, long *offset, long max_offset, unsigned long last_header) |
| { |
| return __find_next_frame(fd, offset, max_offset, last_header, fileread); |
| } |
| |
| static int fnf_read_index; |
| static int fnf_buf_len; |
| |
| static int buf_getbyte(int fd, unsigned char *c) |
| { |
| if(fnf_read_index < fnf_buf_len) |
| { |
| *c = audiobuf[fnf_read_index++]; |
| return 1; |
| } |
| else |
| { |
| fnf_buf_len = read(fd, audiobuf, audiobufend - audiobuf); |
| if(fnf_buf_len < 0) |
| return -1; |
| |
| fnf_read_index = 0; |
| |
| if(fnf_buf_len > 0) |
| { |
| *c = audiobuf[fnf_read_index++]; |
| return 1; |
| } |
| else |
| return 0; |
| } |
| return 0; |
| } |
| |
| static int buf_seek(int fd, int len) |
| { |
| fnf_read_index += len; |
| if(fnf_read_index > fnf_buf_len) |
| { |
| len = fnf_read_index - fnf_buf_len; |
| |
| fnf_buf_len = read(fd, audiobuf, audiobufend - audiobuf); |
| if(fnf_buf_len < 0) |
| return -1; |
| |
| fnf_read_index = 0; |
| fnf_read_index += len; |
| } |
| |
| if(fnf_read_index > fnf_buf_len) |
| { |
| return -1; |
| } |
| else |
| return 0; |
| } |
| |
| static void buf_init(void) |
| { |
| fnf_buf_len = 0; |
| fnf_read_index = 0; |
| } |
| |
| unsigned long buf_find_next_frame(int fd, long *offset, long max_offset, |
| unsigned long last_header) |
| { |
| return __find_next_frame(fd, offset, max_offset, last_header, buf_getbyte); |
| } |
| |
| static int audiobuflen; |
| static int mem_pos; |
| static int mem_cnt; |
| static int mem_maxlen; |
| |
| static int mem_getbyte(int dummy, unsigned char *c) |
| { |
| dummy = dummy; |
| |
| *c = audiobuf[mem_pos++]; |
| if(mem_pos >= audiobuflen) |
| mem_pos = 0; |
| |
| if(mem_cnt++ >= mem_maxlen) |
| return 0; |
| else |
| return 1; |
| } |
| |
| unsigned long mem_find_next_frame(int startpos, long *offset, long max_offset, |
| unsigned long last_header) |
| { |
| audiobuflen = audiobufend - audiobuf; |
| mem_pos = startpos; |
| mem_cnt = 0; |
| mem_maxlen = max_offset; |
| |
| return __find_next_frame(0, offset, max_offset, last_header, mem_getbyte); |
| } |
| |
| int get_mp3file_info(int fd, struct mp3info *info) |
| { |
| unsigned char frame[1800]; |
| unsigned char *vbrheader; |
| unsigned long header; |
| long bytecount; |
| int num_offsets; |
| int frames_per_entry; |
| int i; |
| long offset; |
| int j; |
| long tmp; |
| |
| header = find_next_frame(fd, &bytecount, 0x20000, 0); |
| /* Quit if we haven't found a valid header within 128K */ |
| if(header == 0) |
| return -1; |
| |
| memset(info, 0, sizeof(struct mp3info)); |
| /* These two are needed for proper LAME gapless MP3 playback */ |
| /* TODO: These can be found in a LAME Info header as well, but currently |
| they are only looked for in a Xing header. Xing and Info headers have |
| the exact same format, but Info headers are used for CBR files. */ |
| info->enc_delay = -1; |
| info->enc_padding = -1; |
| if(!mp3headerinfo(info, header)) |
| return -2; |
| |
| /* OK, we have found a frame. Let's see if it has a Xing header */ |
| if(read(fd, frame, info->frame_size-4) < 0) |
| return -3; |
| |
| /* calculate position of VBR header */ |
| if ( info->version == MPEG_VERSION1 ) { |
| if (info->channel_mode == 3) /* mono */ |
| vbrheader = frame + 17; |
| else |
| vbrheader = frame + 32; |
| } |
| else { |
| if (info->channel_mode == 3) /* mono */ |
| vbrheader = frame + 9; |
| else |
| vbrheader = frame + 17; |
| } |
| |
| if (!memcmp(vbrheader, "Xing", 4)) |
| { |
| int i = 8; /* Where to start parsing info */ |
| |
| DEBUGF("Xing header\n"); |
| |
| /* Remember where in the file the Xing header is */ |
| info->vbr_header_pos = lseek(fd, 0, SEEK_CUR) - info->frame_size; |
| |
| /* We want to skip the Xing frame when playing the stream */ |
| bytecount += info->frame_size; |
| |
| /* Now get the next frame to find out the real info about |
| the mp3 stream */ |
| header = find_next_frame(fd, &tmp, 0x20000, 0); |
| if(header == 0) |
| return -4; |
| |
| if(!mp3headerinfo(info, header)) |
| return -5; |
| |
| /* Yes, it is a VBR file */ |
| info->is_vbr = true; |
| info->is_xing_vbr = true; |
| |
| if(vbrheader[7] & VBR_FRAMES_FLAG) /* Is the frame count there? */ |
| { |
| info->frame_count = BYTES2INT(vbrheader[i], vbrheader[i+1], |
| vbrheader[i+2], vbrheader[i+3]); |
| info->file_time = info->frame_count * info->frame_time; |
| i += 4; |
| } |
| |
| if(vbrheader[7] & VBR_BYTES_FLAG) /* Is byte count there? */ |
| { |
| info->byte_count = BYTES2INT(vbrheader[i], vbrheader[i+1], |
| vbrheader[i+2], vbrheader[i+3]); |
| i += 4; |
| } |
| |
| if(info->file_time && info->byte_count) |
| info->bitrate = info->byte_count * 8 / info->file_time; |
| else |
| info->bitrate = 0; |
| |
| if(vbrheader[7] & VBR_TOC_FLAG) /* Is table-of-contents there? */ |
| { |
| memcpy( info->toc, vbrheader+i, 100 ); |
| i += 100; |
| } |
| if (vbrheader[7] & VBR_QUALITY_FLAG) |
| { |
| /* We don't care about this, but need to skip it */ |
| i += 4; |
| } |
| i += 21; |
| info->enc_delay = (vbrheader[i] << 4) | (vbrheader[i + 1] >> 4); |
| info->enc_padding = ((vbrheader[i + 1] & 0x0f) << 8) | vbrheader[i + 2]; |
| if (!(info->enc_delay >= 0 && info->enc_delay <= 1152 && |
| info->enc_padding >= 0 && info->enc_padding <= 2*1152)) |
| { |
| /* Invalid data */ |
| info->enc_delay = -1; |
| info->enc_padding = -1; |
| } |
| } |
| |
| if (!memcmp(vbrheader, "VBRI", 4)) |
| { |
| DEBUGF("VBRI header\n"); |
| |
| /* We want to skip the VBRI frame when playing the stream */ |
| bytecount += info->frame_size; |
| |
| /* Now get the next frame to find out the real info about |
| the mp3 stream */ |
| header = find_next_frame(fd, &tmp, 0x20000, 0); |
| if(header == 0) |
| return -6; |
| |
| bytecount += tmp; |
| |
| if(!mp3headerinfo(info, header)) |
| return -7; |
| |
| DEBUGF("%04x: %04x %04x ", 0, header >> 16, header & 0xffff); |
| for(i = 4;i < (int)sizeof(frame)-4;i+=2) { |
| if(i % 16 == 0) { |
| DEBUGF("\n%04x: ", i-4); |
| } |
| DEBUGF("%04x ", (frame[i-4] << 8) | frame[i-4+1]); |
| } |
| |
| DEBUGF("\n"); |
| |
| /* Yes, it is a FhG VBR file */ |
| info->is_vbr = true; |
| info->is_vbri_vbr = true; |
| info->has_toc = false; /* We don't parse the TOC (yet) */ |
| |
| info->byte_count = BYTES2INT(vbrheader[10], vbrheader[11], |
| vbrheader[12], vbrheader[13]); |
| info->frame_count = BYTES2INT(vbrheader[14], vbrheader[15], |
| vbrheader[16], vbrheader[17]); |
| info->file_time = info->frame_count * info->frame_time; |
| info->bitrate = info->byte_count * 8 / info->file_time; |
| |
| /* We don't parse the TOC, since we don't yet know how to (FIXME) */ |
| num_offsets = BYTES2INT(0, 0, vbrheader[18], vbrheader[19]); |
| frames_per_entry = BYTES2INT(0, 0, vbrheader[24], vbrheader[25]); |
| DEBUGF("Frame size (%dkpbs): %d bytes (0x%x)\n", |
| info->bitrate, info->frame_size, info->frame_size); |
| DEBUGF("Frame count: %x\n", info->frame_count); |
| DEBUGF("Byte count: %x\n", info->byte_count); |
| DEBUGF("Offsets: %d\n", num_offsets); |
| DEBUGF("Frames/entry: %d\n", frames_per_entry); |
| |
| offset = 0; |
| |
| for(i = 0;i < num_offsets;i++) |
| { |
| j = BYTES2INT(0, 0, vbrheader[26+i*2], vbrheader[27+i*2]); |
| offset += j; |
| DEBUGF("%03d: %x (%x)\n", i, offset - bytecount, j); |
| } |
| } |
| |
| /* Is it a LAME Info frame? */ |
| if (!memcmp(vbrheader, "Info", 4)) |
| { |
| /* Make sure we skip this frame in playback */ |
| bytecount += info->frame_size; |
| } |
| |
| return bytecount; |
| } |
| |
| static void long2bytes(unsigned char *buf, long val) |
| { |
| buf[0] = (val >> 24) & 0xff; |
| buf[1] = (val >> 16) & 0xff; |
| buf[2] = (val >> 8) & 0xff; |
| buf[3] = val & 0xff; |
| } |
| |
| int count_mp3_frames(int fd, int startpos, int filesize, |
| void (*progressfunc)(int)) |
| { |
| unsigned long header = 0; |
| struct mp3info info; |
| int num_frames; |
| long bytes; |
| int cnt; |
| long progress_chunk = filesize / 50; /* Max is 50%, in 1% increments */ |
| int progress_cnt = 0; |
| bool is_vbr = false; |
| int last_bitrate = 0; |
| int header_template = 0; |
| |
| if(lseek(fd, startpos, SEEK_SET) < 0) |
| return -1; |
| |
| buf_init(); |
| |
| /* Find out the total number of frames */ |
| num_frames = 0; |
| cnt = 0; |
| |
| while((header = buf_find_next_frame(fd, &bytes, -1, header_template))) { |
| mp3headerinfo(&info, header); |
| |
| if(!header_template) |
| header_template = header; |
| |
| /* See if this really is a VBR file */ |
| if(last_bitrate && info.bitrate != last_bitrate) |
| { |
| is_vbr = true; |
| } |
| last_bitrate = info.bitrate; |
| |
| buf_seek(fd, info.frame_size-4); |
| num_frames++; |
| if(progressfunc) |
| { |
| cnt += bytes + info.frame_size; |
| if(cnt > progress_chunk) |
| { |
| progress_cnt++; |
| progressfunc(progress_cnt); |
| cnt = 0; |
| } |
| } |
| } |
| DEBUGF("Total number of frames: %d\n", num_frames); |
| |
| if(is_vbr) |
| return num_frames; |
| else |
| { |
| DEBUGF("Not a VBR file\n"); |
| return 0; |
| } |
| } |
| |
| static const char cooltext[] = "Rockbox - rocks your box"; |
| |
| int create_xing_header(int fd, int startpos, int filesize, |
| unsigned char *buf, int num_frames, |
| unsigned long header_template, |
| void (*progressfunc)(int), bool generate_toc) |
| { |
| unsigned long header = 0; |
| struct mp3info info; |
| int pos, last_pos; |
| int i, j; |
| long bytes; |
| unsigned long filepos; |
| int x; |
| int index; |
| unsigned char toc[100]; |
| unsigned long xing_header_template = 0; |
| |
| DEBUGF("create_xing_header()\n"); |
| |
| if(header_template) |
| xing_header_template = header_template; |
| |
| if(generate_toc) |
| { |
| lseek(fd, startpos, SEEK_SET); |
| buf_init(); |
| |
| /* Generate filepos table */ |
| last_pos = 0; |
| filepos = 0; |
| header = 0; |
| x = 0; |
| for(i = 0;i < 100;i++) { |
| /* Calculate the absolute frame number for this seek point */ |
| pos = i * num_frames / 100; |
| |
| /* Advance from the last seek point to this one */ |
| for(j = 0;j < pos - last_pos;j++) |
| { |
| header = buf_find_next_frame(fd, &bytes, -1, header_template); |
| filepos += bytes; |
| mp3headerinfo(&info, header); |
| buf_seek(fd, info.frame_size-4); |
| filepos += info.frame_size; |
| |
| if(!header_template) |
| header_template = header; |
| } |
| |
| /* Save a header for later use if header_template is empty. |
| We only save one header, and we want to save one in the |
| middle of the stream, just in case the first and the last |
| headers are corrupt. */ |
| if(!xing_header_template && i == 1) |
| xing_header_template = header; |
| |
| if(progressfunc) |
| { |
| progressfunc(50 + i/2); |
| } |
| |
| /* Fill in the TOC entry */ |
| /* each toc is a single byte indicating how many 256ths of the |
| * way through the file, is that percent of the way through the |
| * song. the easy method, filepos*256/filesize, chokes when |
| * the upper 8 bits of the file position are nonzero |
| * (i.e. files over 16mb in size). |
| */ |
| if (filepos > 0xFFFFFF) |
| { |
| /* instead of multiplying filepos by 256, we divide |
| * filesize by 256. |
| */ |
| toc[i] = filepos / (filesize >> 8); |
| } |
| else |
| { |
| toc[i] = filepos * 256 / filesize; |
| } |
| |
| DEBUGF("Pos %d: %d relpos: %d filepos: %x tocentry: %x\n", |
| i, pos, pos-last_pos, filepos, toc[i]); |
| |
| last_pos = pos; |
| } |
| } |
| |
| /* Use the template header and create a new one. |
| We ignore the Protection bit even if the rest of the stream is |
| protected. (fixme?) */ |
| header = xing_header_template & ~(BITRATE_MASK | PROTECTION_MASK); |
| header |= 8 << 12; /* This gives us plenty of space, at least 192 bytes */ |
| |
| if (!mp3headerinfo(&info, header)) |
| return 0; /* invalid header */ |
| |
| /* Clear the frame */ |
| memset(buf, 0, 1500); |
| |
| /* Write the header to the buffer */ |
| long2bytes(buf, header); |
| |
| /* calculate position of VBR header */ |
| if ( info.version == MPEG_VERSION1 ) { |
| if (info.channel_mode == 3) /* mono */ |
| index = 21; |
| else |
| index = 36; |
| } |
| else { |
| if (info.channel_mode == 3) /* mono */ |
| index = 13; |
| else |
| index = 21; |
| } |
| |
| /* Create the Xing data */ |
| memcpy(&buf[index], "Xing", 4); |
| long2bytes(&buf[index+4], ((num_frames?VBR_FRAMES_FLAG:0) | |
| (filesize?VBR_BYTES_FLAG:0) | |
| (generate_toc?VBR_TOC_FLAG:0))); |
| index = index+8; |
| if(num_frames) |
| { |
| long2bytes(&buf[index], num_frames); |
| index += 4; |
| } |
| |
| if(filesize) |
| { |
| long2bytes(&buf[index], filesize - startpos); |
| index += 4; |
| } |
| |
| /* Copy the TOC */ |
| memcpy(buf + index, toc, 100); |
| |
| /* And some extra cool info */ |
| memcpy(buf + index + 100, cooltext, sizeof(cooltext)); |
| |
| #ifdef DEBUG |
| for(i = 0;i < info.frame_size;i++) |
| { |
| if(i && !(i % 16)) |
| DEBUGF("\n"); |
| |
| DEBUGF("%02x ", buf[i]); |
| } |
| #endif |
| |
| return info.frame_size; |
| } |