tree: ca08e376c6b291b64af81030e11a67f7daa37611 [path history] [tgz]
  1. include/
  2. src/
  3. jztool.c
  4. Makefile
  5. README.md
rbutil/jztool/README.md

jztool -- Ingenic device utility & bootloader installer

The jztool utility can help install, backup, and restore the bootloader on Rockbox players based on a supported Ingenic SoC.

FiiO M3K

First, get a copy of the bootloader.m3k file, either by downloading it from https://rockbox.org, or by compiling it yourself (choose 'B'ootloader build when configuring your build).

The first time you install Rockbox, you need to load the Rockbox bootloader over USB by entering USB boot mode. The easiest way to do this is by plugging in the microUSB cable to the M3K and holding the VOL- button while plugging the USB into your computer. If you entered USB boot mode, the button light will turn on but the LCD will remain black.

Copy the bootloader.m3k next to the jztool executable and follow the instructions below which are appropriate to your OS.

Running jztool

Linux/Mac

Run the following command in a terminal. Note that on Linux, you will need to have root access to allow libusb to access the USB device.

# Linux / Mac
# NOTE: root permissions are required on Linux to access the USB device
#       eg. with 'sudo' or 'su -c' depending on your distro.
$ ./jztool fiiom3k load bootloader.m3k

Windows

To allow jztool access to the M3K in USB boot mode, you need to install the WinUSB driver. The recommended way to install it is using Zadig, which may be downloaded from its homepage https://zadig.akeo.ie. Please note this is 3rd party software not maintained or supported by Rockbox developers. (Zadig will require administrator access on the machine you are using.)

When running Zadig you must select the WinUSB driver; the other driver options will not work properly with jztool. You will have to select the correct USB device in Zadig -- the name and USB IDs of the M3K in USB boot mode are listed below. NOTE: the device name may show only as "X" and a hollow square in Zadig. The IDs will not change, so those are the most reliable way to confirm you have selected the correct device.

Name:   Ingenic Semiconductor Co.,Ltd X1000
USB ID: A108 1000

Assuming you installed the WinUSB driver successfully, open a command prompt in the folder containing jztool. Administrator access is not required for this step.

Type the following command to load the Rockbox bootloader:

# Windows
$ jztool.exe fiiom3k load bootloader.m3k

Further instructions

After running jztool successfully your M3K will display the recovery menu of the Rockbox bootloader. If you want to permanently install Rockbox to your M3K, copy bootloader.m3k to the root of an SD card, insert it to your device, then choose "Install/update bootloader" from the menu.

It is highly recommended that you take a backup of your existing bootloader in case of any trouble -- choose "Backup bootloader" from the recovery menu. The backup file is called "fiiom3k-boot.bin" and will be saved to the root of the SD card. If you need to restore it, simply place the file at the root of your SD card and select "Restore bootloader".

In the future if you want to backup, restore, or update the bootloader, you can access the Rockbox bootloader's recovery menu by holding VOL+ when booting.

Known issues

  • When using the bootloader's USB mode, you may get stuck on "Waiting for USB" even though the cable is already plugged in. If this occurs, unplug the USB cable and plug it back in to trigger the connection.

TODO list

Add better documentation and logging

There's only a bare minimum of documentation, and logging is sparse, not really enough to debug problems.

Some of the error messages could be friendlier too.

Integration with the Rockbox utility

Adding support to the Rockbox utility should be mostly boilerplate since the jztool library wraps all the troublesome details.

Permissions are an issue on Linux because by default only root can access "raw" USB devices. If we want to package rbutil for distro we can install a udev rule to allow access to the specific USB IDs we need, eg. allowing users in the "wheel" group to access the device.

On Windows and Mac, no special permissions are needed to access USB devices assuming the drivers are set up. (Zadig does require administrator access to run, but that's external to the Rockbox utility.)