firmware/export/config/ipod6g.h - rockbox - Gitiles

 /*
  * This config file is for iPod 6G / Classic
  */

 #define IPOD_ARCH 1

 /* For Rolo and boot loader */
 #define MODEL_NUMBER 71

 #define MODEL_NAME   "Apple iPod Classic/6G"

 /* define this if you use an ATA controller */
 #define CONFIG_STORAGE STORAGE_ATA

 #define HAVE_ATA_DMA
 #define ATA_MAX_UDMA 4
 #define ATA_MAX_MWDMA 2

 /* define this if the ATA controller and method of USB access support LBA48 */
 #define HAVE_LBA48

 /* define this if you have recording possibility */
 #define HAVE_RECORDING
 //#define HAVE_AGC
 //#define HAVE_HISTOGRAM

 /* Define bitmask of input sources - recordable bitmask can be defined
    explicitly if different */
 #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)

 /* define the bitmask of hardware sample rates */
 #define HW_SAMPR_CAPS   (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 \
                        | SAMPR_CAP_48 | SAMPR_CAP_24 | SAMPR_CAP_12 \
                        | SAMPR_CAP_32 | SAMPR_CAP_16 | SAMPR_CAP_8)

 /* define the bitmask of recording sample rates */
 #define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 \
                        | SAMPR_CAP_48 | SAMPR_CAP_24 | SAMPR_CAP_12 \
                        | SAMPR_CAP_32 | SAMPR_CAP_16 | SAMPR_CAP_8)

 /* define this if you have a bitmap LCD display */
 #define HAVE_LCD_BITMAP

 /* define this if you can flip your LCD */
 //#define HAVE_LCD_FLIP

 /* define this if you have a colour LCD */
 #define HAVE_LCD_COLOR

 /* define this if you want album art for this target */
 #define HAVE_ALBUMART

 /* define this to enable bitmap scaling */
 #define HAVE_BMP_SCALING

 /* define this to enable JPEG decoding */
 #define HAVE_JPEG

 /* define this if you can invert the colours on your LCD */
 //#define HAVE_LCD_INVERT

 /* define this if you have access to the quickscreen */
 #define HAVE_QUICKSCREEN

 /* define this if you would like tagcache to build on this target */
 #define HAVE_TAGCACHE

 /* define this if the unit uses a scrollwheel for navigation */
 #define HAVE_SCROLLWHEEL
 #define HAVE_WHEEL_ACCELERATION
 #define WHEEL_ACCEL_START 270
 #define WHEEL_ACCELERATION 3

 /* Define this if you can detect headphones */
 #define HAVE_HEADPHONE_DETECTION

 /* LCD dimensions */
 #define LCD_WIDTH  320
 #define LCD_HEIGHT 240
 /* sqrt(320^2 + 240^2) / 2.5 = 160.0 */
 #define LCD_DPI 160
 #define LCD_DEPTH  16   /* pseudo 262.144 colors */
 #define LCD_PIXELFORMAT RGB565 /* rgb565 */

 /* Define this if the LCD can shut down */
 #define HAVE_LCD_SHUTDOWN

 /* Define this if your LCD can be enabled/disabled */
 #define HAVE_LCD_ENABLE

 /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
    should be defined as well. */
 #ifndef BOOTLOADER
 #define HAVE_LCD_SLEEP
 #define HAVE_LCD_SLEEP_SETTING
 #endif

 #define CONFIG_KEYPAD IPOD_4G_PAD

 /* Define this to have CPU boosted while scrolling in the UI */
 #define HAVE_GUI_BOOST

 #define AB_REPEAT_ENABLE
 #define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE

 /* define this if you have a disk storage, i.e. something
    that needs spinups and can cause skips when shaked */
 #define HAVE_DISK_STORAGE

 /* Define this to enable morse code input */
 #define HAVE_MORSE_INPUT

 /* Define this if you do software codec */
 #define CONFIG_CODEC SWCODEC

 /* define this if you have a real-time clock */
 #define CONFIG_RTC RTC_NANO2G

 /* Define if the device can wake from an RTC alarm */
 //#define HAVE_RTC_ALARM

 #define CONFIG_LCD LCD_IPOD6G

 /* Define the type of audio codec */
 #define HAVE_CS42L55

 #define HAVE_PCM_DMA_ADDRESS

 /* Define this for LCD backlight available */
 #define HAVE_BACKLIGHT
 #define HAVE_BACKLIGHT_BRIGHTNESS

 /* Define this if you have a software controlled poweroff */
 #define HAVE_SW_POWEROFF

 /* The number of bytes reserved for loadable codecs */
 #define CODEC_SIZE 0x100000

 /* The number of bytes reserved for loadable plugins */
 #define PLUGIN_BUFFER_SIZE 0x80000

 /* 6g has a standard battery of 550mAh, except for the thick 6g (2007 160gb) which has a standard battery of 850mAh */
 #define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */
 #define BATTERY_CAPACITY_MIN     300 /* min. capacity selectable */
 #define BATTERY_CAPACITY_MAX     1000 /* max. capacity selectable */
 #define BATTERY_CAPACITY_INC      10 /* capacity increment */
 #define BATTERY_TYPES_COUNT        1 /* only one type */

 #define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE

 /* Hardware controlled charging with monitoring */
 #define CONFIG_CHARGING CHARGING_MONITOR

 /* define current usage levels */
 #define CURRENT_NORMAL     18  /* playback @48MHz clock, backlight off */
 #define CURRENT_BACKLIGHT  23  /* maximum brightness */

 /* define this if the unit can be powered or charged via USB */
 #define HAVE_USB_POWER

 /* Define this if your LCD can set contrast */
 //#define HAVE_LCD_CONTRAST

 /* Define Apple remote tuner */
 //#define CONFIG_TUNER IPOD_REMOTE_TUNER
 //#define HAVE_RDS_CAP
 //#define CONFIG_RDS RDS_CFG_PUSH

 /* The exact type of CPU */
 #define CONFIG_CPU S5L8702

 /* I2C interface */
 #define CONFIG_I2C I2C_S5L8702

 #define HAVE_USB_CHARGING_ENABLE

 /* The size of the flash ROM */
 #define FLASH_SIZE 0x1000000

 /* Define this to the CPU frequency */
 #define CPU_FREQ        216000000

 /* define this if the hardware can be powered off while charging */
 #define HAVE_POWEROFF_WHILE_CHARGING

 /* Offset ( in the firmware file's header ) to the file CRC */
 #define FIRMWARE_OFFSET_FILE_CRC 0

 /* Offset ( in the firmware file's header ) to the real data */
 #define FIRMWARE_OFFSET_FILE_DATA 8

 /* Define this if you can read an absolute wheel position */
 #define HAVE_WHEEL_POSITION

 #define SECTOR_SIZE 4096

 #define HAVE_ATA_SMART

 /* define this if the device has larger sectors when accessed via USB */
 /* (only relevant in disk.c, fat.c now always supports large virtual sectors) */
 //#define MAX_LOG_SECTOR_SIZE 4096

 /* define this if the hard drive uses large physical sectors (ATA-7 feature) */
 /* and doesn't handle them in the drive firmware */
 //#define MAX_PHYS_SECTOR_SIZE 4096

 #define HAVE_HARDWARE_CLICK

 /* Define this if you have adjustable CPU frequency */
 #define HAVE_ADJUSTABLE_CPU_FREQ

 #define BOOTFILE_EXT "ipod"
 #define BOOTFILE "rockbox." BOOTFILE_EXT
 #define BOOTDIR "/.rockbox"

 /* Alternative bootfile extension - this is for encrypted images */
 #define BOOTFILE_EXT2 "ipodx"

 /* Define this for FM radio input available */
 #define HAVE_FMRADIO_IN

 /** Port-specific settings **/

 #if 0
 /* Main LCD contrast range and defaults */
 #define MIN_CONTRAST_SETTING        1
 #define MAX_CONTRAST_SETTING        30
 #define DEFAULT_CONTRAST_SETTING    19 /* Match boot contrast */
 #endif

 /* Main LCD backlight brightness range and defaults */
 #define MIN_BRIGHTNESS_SETTING      1
 #define MAX_BRIGHTNESS_SETTING      0x3f
 #define DEFAULT_BRIGHTNESS_SETTING  0x20

 /* USB defines */
 #define CONFIG_USBOTG USBOTG_DESIGNWARE
 #define USB_DW_CLOCK 0
 #define USB_DW_TURNAROUND 5
 /* logf() over USB serial (http://www.rockbox.org/wiki/PortalPlayerUsb) */
 //#define USB_ENABLE_SERIAL
 #define HAVE_USBSTACK
 #define HAVE_USB_HID_MOUSE
 #define USB_VENDOR_ID 0x05AC
 #define USB_PRODUCT_ID 0x1261
 #define USB_DEVBSS_ATTR __attribute__((aligned(32)))
 #define HAVE_BOOTLOADER_USB_MODE
 #ifdef BOOTLOADER
 #define USBPOWER_BTN_IGNORE (~0)
 #endif

 #define USB_READ_BUFFER_SIZE (1024*24)

 /* Serial */
 #ifdef BOOTLOADER
 #if 0 /* Enable/disable LOGF_SERIAL for bootloader */
 #define HAVE_SERIAL
 #define ROCKBOX_HAS_LOGF
 #define LOGF_SERIAL
 #endif
 #else /* !BOOTLOADER */
 #define HAVE_SERIAL
 /* Disable iAP when LOGF_SERIAL is enabled to avoid conflicts */
 #ifndef LOGF_SERIAL
 #define IPOD_ACCESSORY_PROTOCOL
 #endif
 #endif

 /* Define this if you can switch on/off the accessory power supply */
 #define HAVE_ACCESSORY_SUPPLY

 /* Define this, if you can switch on/off the lineout */
 #define HAVE_LINEOUT_POWEROFF

 /* Define this if a programmable hotkey is mapped */
 #define HAVE_HOTKEY
	/*
	* This config file is for iPod 6G / Classic
	*/

	#define IPOD_ARCH 1

	/* For Rolo and boot loader */
	#define MODEL_NUMBER 71

	#define MODEL_NAME "Apple iPod Classic/6G"

	/* define this if you use an ATA controller */
	#define CONFIG_STORAGE STORAGE_ATA

	#define HAVE_ATA_DMA
	#define ATA_MAX_UDMA 4
	#define ATA_MAX_MWDMA 2

	/* define this if the ATA controller and method of USB access support LBA48 */
	#define HAVE_LBA48

	/* define this if you have recording possibility */
	#define HAVE_RECORDING
	//#define HAVE_AGC
	//#define HAVE_HISTOGRAM

	/* Define bitmask of input sources - recordable bitmask can be defined
	explicitly if different */
	#define INPUT_SRC_CAPS (SRC_CAP_MIC \| SRC_CAP_LINEIN)

	/* define the bitmask of hardware sample rates */
	#define HW_SAMPR_CAPS (SAMPR_CAP_44 \| SAMPR_CAP_22 \| SAMPR_CAP_11 \
	\| SAMPR_CAP_48 \| SAMPR_CAP_24 \| SAMPR_CAP_12 \
	\| SAMPR_CAP_32 \| SAMPR_CAP_16 \| SAMPR_CAP_8)

	/* define the bitmask of recording sample rates */
	#define REC_SAMPR_CAPS (SAMPR_CAP_44 \| SAMPR_CAP_22 \| SAMPR_CAP_11 \
	\| SAMPR_CAP_48 \| SAMPR_CAP_24 \| SAMPR_CAP_12 \
	\| SAMPR_CAP_32 \| SAMPR_CAP_16 \| SAMPR_CAP_8)

	/* define this if you have a bitmap LCD display */
	#define HAVE_LCD_BITMAP

	/* define this if you can flip your LCD */
	//#define HAVE_LCD_FLIP

	/* define this if you have a colour LCD */
	#define HAVE_LCD_COLOR

	/* define this if you want album art for this target */
	#define HAVE_ALBUMART

	/* define this to enable bitmap scaling */
	#define HAVE_BMP_SCALING

	/* define this to enable JPEG decoding */
	#define HAVE_JPEG

	/* define this if you can invert the colours on your LCD */
	//#define HAVE_LCD_INVERT

	/* define this if you have access to the quickscreen */
	#define HAVE_QUICKSCREEN

	/* define this if you would like tagcache to build on this target */
	#define HAVE_TAGCACHE

	/* define this if the unit uses a scrollwheel for navigation */
	#define HAVE_SCROLLWHEEL
	#define HAVE_WHEEL_ACCELERATION
	#define WHEEL_ACCEL_START 270
	#define WHEEL_ACCELERATION 3

	/* Define this if you can detect headphones */
	#define HAVE_HEADPHONE_DETECTION

	/* LCD dimensions */
	#define LCD_WIDTH 320
	#define LCD_HEIGHT 240
	/* sqrt(320^2 + 240^2) / 2.5 = 160.0 */
	#define LCD_DPI 160
	#define LCD_DEPTH 16 /* pseudo 262.144 colors */
	#define LCD_PIXELFORMAT RGB565 /* rgb565 */

	/* Define this if the LCD can shut down */
	#define HAVE_LCD_SHUTDOWN

	/* Define this if your LCD can be enabled/disabled */
	#define HAVE_LCD_ENABLE

	/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
	should be defined as well. */
	#ifndef BOOTLOADER
	#define HAVE_LCD_SLEEP
	#define HAVE_LCD_SLEEP_SETTING
	#endif

	#define CONFIG_KEYPAD IPOD_4G_PAD

	/* Define this to have CPU boosted while scrolling in the UI */
	#define HAVE_GUI_BOOST

	#define AB_REPEAT_ENABLE
	#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE

	/* define this if you have a disk storage, i.e. something
	that needs spinups and can cause skips when shaked */
	#define HAVE_DISK_STORAGE

	/* Define this to enable morse code input */
	#define HAVE_MORSE_INPUT

	/* Define this if you do software codec */
	#define CONFIG_CODEC SWCODEC

	/* define this if you have a real-time clock */
	#define CONFIG_RTC RTC_NANO2G

	/* Define if the device can wake from an RTC alarm */
	//#define HAVE_RTC_ALARM

	#define CONFIG_LCD LCD_IPOD6G

	/* Define the type of audio codec */
	#define HAVE_CS42L55

	#define HAVE_PCM_DMA_ADDRESS

	/* Define this for LCD backlight available */
	#define HAVE_BACKLIGHT
	#define HAVE_BACKLIGHT_BRIGHTNESS

	/* Define this if you have a software controlled poweroff */
	#define HAVE_SW_POWEROFF

	/* The number of bytes reserved for loadable codecs */
	#define CODEC_SIZE 0x100000

	/* The number of bytes reserved for loadable plugins */
	#define PLUGIN_BUFFER_SIZE 0x80000

	/* 6g has a standard battery of 550mAh, except for the thick 6g (2007 160gb) which has a standard battery of 850mAh */
	#define BATTERY_CAPACITY_DEFAULT 550 /* default battery capacity */
	#define BATTERY_CAPACITY_MIN 300 /* min. capacity selectable */
	#define BATTERY_CAPACITY_MAX 1000 /* max. capacity selectable */
	#define BATTERY_CAPACITY_INC 10 /* capacity increment */
	#define BATTERY_TYPES_COUNT 1 /* only one type */

	#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE

	/* Hardware controlled charging with monitoring */
	#define CONFIG_CHARGING CHARGING_MONITOR

	/* define current usage levels */
	#define CURRENT_NORMAL 18 /* playback @48MHz clock, backlight off */
	#define CURRENT_BACKLIGHT 23 /* maximum brightness */

	/* define this if the unit can be powered or charged via USB */
	#define HAVE_USB_POWER

	/* Define this if your LCD can set contrast */
	//#define HAVE_LCD_CONTRAST

	/* Define Apple remote tuner */
	//#define CONFIG_TUNER IPOD_REMOTE_TUNER
	//#define HAVE_RDS_CAP
	//#define CONFIG_RDS RDS_CFG_PUSH

	/* The exact type of CPU */
	#define CONFIG_CPU S5L8702

	/* I2C interface */
	#define CONFIG_I2C I2C_S5L8702

	#define HAVE_USB_CHARGING_ENABLE

	/* The size of the flash ROM */
	#define FLASH_SIZE 0x1000000

	/* Define this to the CPU frequency */
	#define CPU_FREQ 216000000

	/* define this if the hardware can be powered off while charging */
	#define HAVE_POWEROFF_WHILE_CHARGING

	/* Offset ( in the firmware file's header ) to the file CRC */
	#define FIRMWARE_OFFSET_FILE_CRC 0

	/* Offset ( in the firmware file's header ) to the real data */
	#define FIRMWARE_OFFSET_FILE_DATA 8

	/* Define this if you can read an absolute wheel position */
	#define HAVE_WHEEL_POSITION

	#define SECTOR_SIZE 4096

	#define HAVE_ATA_SMART

	/* define this if the device has larger sectors when accessed via USB */
	/* (only relevant in disk.c, fat.c now always supports large virtual sectors) */
	//#define MAX_LOG_SECTOR_SIZE 4096

	/* define this if the hard drive uses large physical sectors (ATA-7 feature) */
	/* and doesn't handle them in the drive firmware */
	//#define MAX_PHYS_SECTOR_SIZE 4096

	#define HAVE_HARDWARE_CLICK

	/* Define this if you have adjustable CPU frequency */
	#define HAVE_ADJUSTABLE_CPU_FREQ

	#define BOOTFILE_EXT "ipod"
	#define BOOTFILE "rockbox." BOOTFILE_EXT
	#define BOOTDIR "/.rockbox"

	/* Alternative bootfile extension - this is for encrypted images */
	#define BOOTFILE_EXT2 "ipodx"

	/* Define this for FM radio input available */
	#define HAVE_FMRADIO_IN

	/ Port-specific settings /

	#if 0
	/* Main LCD contrast range and defaults */
	#define MIN_CONTRAST_SETTING 1
	#define MAX_CONTRAST_SETTING 30
	#define DEFAULT_CONTRAST_SETTING 19 /* Match boot contrast */
	#endif

	/* Main LCD backlight brightness range and defaults */
	#define MIN_BRIGHTNESS_SETTING 1
	#define MAX_BRIGHTNESS_SETTING 0x3f
	#define DEFAULT_BRIGHTNESS_SETTING 0x20

	/* USB defines */
	#define CONFIG_USBOTG USBOTG_DESIGNWARE
	#define USB_DW_CLOCK 0
	#define USB_DW_TURNAROUND 5
	/* logf() over USB serial (http://www.rockbox.org/wiki/PortalPlayerUsb) */
	//#define USB_ENABLE_SERIAL
	#define HAVE_USBSTACK
	#define HAVE_USB_HID_MOUSE
	#define USB_VENDOR_ID 0x05AC
	#define USB_PRODUCT_ID 0x1261
	#define USB_DEVBSS_ATTR __attribute__((aligned(32)))
	#define HAVE_BOOTLOADER_USB_MODE
	#ifdef BOOTLOADER
	#define USBPOWER_BTN_IGNORE (~0)
	#endif

	#define USB_READ_BUFFER_SIZE (1024*24)

	/* Serial */
	#ifdef BOOTLOADER
	#if 0 /* Enable/disable LOGF_SERIAL for bootloader */
	#define HAVE_SERIAL
	#define ROCKBOX_HAS_LOGF
	#define LOGF_SERIAL
	#endif
	#else /* !BOOTLOADER */
	#define HAVE_SERIAL
	/* Disable iAP when LOGF_SERIAL is enabled to avoid conflicts */
	#ifndef LOGF_SERIAL
	#define IPOD_ACCESSORY_PROTOCOL
	#endif
	#endif

	/* Define this if you can switch on/off the accessory power supply */
	#define HAVE_ACCESSORY_SUPPLY

	/* Define this, if you can switch on/off the lineout */
	#define HAVE_LINEOUT_POWEROFF

	/* Define this if a programmable hotkey is mapped */
	#define HAVE_HOTKEY