| /* |
| * This config file is for the Philips GoGear HDD63x0 |
| */ |
| |
| #define TARGET_TREE /* this target is using the target tree system */ |
| |
| /* For Rolo and boot loader */ |
| #define MODEL_NUMBER 65 |
| #define MODEL_NAME "Philips GoGear HDD63x0" |
| |
| /* define this if you use an ATA controller */ |
| #define CONFIG_STORAGE STORAGE_ATA |
| |
| /*define this if the ATA controller and method of USB access support LBA48 */ |
| #define HAVE_LBA48 |
| |
| /* define this if you have recording possibility */ |
| #define HAVE_RECORDING |
| |
| /* Define bitmask of input sources - recordable bitmask can be defined |
| explicitly if different */ |
| #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO) |
| |
| /* define the bitmask of hardware sample rates */ |
| #define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ |
| SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) |
| |
| /* define the bitmask of recording sample rates */ |
| #define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \ |
| SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8) |
| |
| /* define this if you have a bitmap LCD display */ |
| #define HAVE_LCD_BITMAP |
| |
| /* define this if you have a colour LCD */ |
| #define HAVE_LCD_COLOR |
| |
| /* define this if you want album art for this target */ |
| #define HAVE_ALBUMART |
| |
| /* define this to enable bitmap scaling */ |
| #define HAVE_BMP_SCALING |
| |
| /* define this to enable JPEG decoding */ |
| #define HAVE_JPEG |
| |
| /* define this if you have access to the quickscreen */ |
| #define HAVE_QUICKSCREEN |
| |
| /* define this if you have access to the pitchscreen */ |
| #define HAVE_PITCHSCREEN |
| |
| /* define this if you would like tagcache to build on this target */ |
| #define HAVE_TAGCACHE |
| |
| /* LCD dimensions */ |
| #define LCD_WIDTH 220 |
| #define LCD_HEIGHT 176 |
| #define LCD_DEPTH 16 /* 65536 colours */ |
| #define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */ |
| |
| #ifndef BOOTLOADER |
| /* Define this if your LCD can be enabled/disabled */ |
| #define HAVE_LCD_ENABLE |
| |
| /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE |
| * should be defined as well. |
| * We can currently put the lcd to sleep but it won't wake up properly */ |
| /* #define HAVE_LCD_SLEEP */ |
| /* #define HAVE_LCD_SLEEP_SETTING */ |
| #endif |
| |
| /* define this if you can flip your LCD */ |
| #define HAVE_LCD_FLIP |
| |
| /* define this if you can invert the colours on your LCD */ |
| #define HAVE_LCD_INVERT |
| |
| /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ |
| |
| #define CONFIG_KEYPAD PHILIPS_HDD6330_PAD |
| |
| /* Define this to enable morse code input */ |
| #define HAVE_MORSE_INPUT |
| |
| /* define this if the target has volume keys which can be used in the lists */ |
| #define HAVE_VOLUME_IN_LIST |
| |
| /* Define this if you do software codec */ |
| #define CONFIG_CODEC SWCODEC |
| |
| /* define this if you have a real-time clock. The HDD16x0 has a PCF8563 RTC, |
| but it's register compatible with the E8564. */ |
| #ifndef BOOTLOADER |
| #define CONFIG_RTC RTC_E8564 |
| #define HAVE_RTC_ALARM |
| #endif |
| |
| /* Define this if you have a software controlled poweroff */ |
| #define HAVE_SW_POWEROFF |
| |
| /* The number of bytes reserved for loadable codecs */ |
| #define CODEC_SIZE 0x100000 |
| |
| /* The number of bytes reserved for loadable plugins */ |
| #define PLUGIN_BUFFER_SIZE 0x80000 |
| |
| /* Define this if you have the WM8731 audio codec */ |
| #define HAVE_WM8731 |
| |
| /* WM8731 has no tone controls, so we use the software ones */ |
| #define HAVE_SW_TONE_CONTROLS |
| |
| /* TODO: #define AB_REPEAT_ENABLE */ |
| |
| /* FM Tuner */ |
| #define CONFIG_TUNER TEA5767 |
| #define CONFIG_TUNER_XTAL 32768 |
| |
| /* define this if you have a disk storage, i.e. something |
| that needs spinups and can cause skips when shaked */ |
| #define HAVE_DISK_STORAGE |
| |
| /* Define this for LCD backlight available */ |
| #define HAVE_BACKLIGHT |
| #define HAVE_BACKLIGHT_BRIGHTNESS |
| /* #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING */ |
| |
| /* Main LCD backlight brightness range and defaults */ |
| #define MIN_BRIGHTNESS_SETTING 1 |
| #define MAX_BRIGHTNESS_SETTING 16 |
| #define DEFAULT_BRIGHTNESS_SETTING 13 /* match OF brightness */ |
| |
| /* define this if you have a light associated with the buttons */ |
| #define HAVE_BUTTON_LIGHT |
| #define HAVE_BUTTONLIGHT_BRIGHTNESS |
| |
| /* Define this if you can detect headphones */ |
| #define HAVE_HEADPHONE_DETECTION |
| |
| #define BATTERY_CAPACITY_DEFAULT 840 /* default battery capacity */ |
| #define BATTERY_CAPACITY_MIN 800 /* min. capacity selectable */ |
| #define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */ |
| #define BATTERY_CAPACITY_INC 20 /* capacity increment */ |
| #define BATTERY_TYPES_COUNT 1 /* only one type */ |
| |
| /* Hardware controlled charging */ |
| #define CONFIG_CHARGING CHARGING_SIMPLE |
| |
| /* define this if the unit can be powered or charged via USB */ |
| #define HAVE_USB_POWER |
| |
| /* Define this if you have a PortalPlayer PP5020 */ |
| #define CONFIG_CPU PP5022 |
| |
| /* Define this if you want to use the PP5020 i2c interface */ |
| #define CONFIG_I2C I2C_PP5020 |
| |
| /* define this if the hardware can be powered off while charging */ |
| /* #define HAVE_POWEROFF_WHILE_CHARGING */ |
| |
| /* The start address index for ROM builds */ |
| #define ROM_START 0x00000000 |
| |
| /* The size of the flash ROM */ |
| #define FLASH_SIZE 0x100000 |
| |
| /* Define this to the CPU frequency */ |
| #define CPU_FREQ 75000000 |
| |
| /* Type of LCD */ |
| #define CONFIG_LCD LCD_HDD6330 |
| |
| /* Define this if your LCD can set contrast */ |
| /* #define HAVE_LCD_CONTRAST */ |
| |
| #define MIN_CONTRAST_SETTING 0 |
| #define MAX_CONTRAST_SETTING 127 |
| #define DEFAULT_CONTRAST_SETTING 63 /* Match boot contrast */ |
| |
| /* We're able to shut off power to the HDD */ |
| #define HAVE_ATA_POWER_OFF |
| |
| /* Offset ( in the firmware file's header ) to the file CRC and data. These are |
| only used when loading the old format rockbox.e200 file */ |
| #define FIRMWARE_OFFSET_FILE_CRC 0x0 |
| #define FIRMWARE_OFFSET_FILE_DATA 0x8 |
| |
| /* USB On-the-go */ |
| #define CONFIG_USBOTG USBOTG_ARC |
| |
| /* enable these for the experimental usb stack */ |
| #define HAVE_USBSTACK |
| #define USE_ROCKBOX_USB |
| #define USB_VENDOR_ID 0x0471 |
| #define USB_PRODUCT_ID 0x014B |
| #define HAVE_USB_HID_MOUSE |
| |
| /* Define this if you have adjustable CPU frequency */ |
| #define HAVE_ADJUSTABLE_CPU_FREQ |
| |
| #define MI4_FORMAT |
| #define BOOTFILE_EXT "mi4" |
| #define BOOTFILE "rockbox." BOOTFILE_EXT |
| #define BOOTDIR "/.rockbox" |
| |
| #define ICODE_ATTR_TREMOR_NOT_MDCT |
| |
| /* DMA is used only for reading on PP502x because although reads are ~8x faster |
| * writes appear to be ~25% slower. |
| */ |
| /* TODO: it does not work - it hangs the player */ |
| /* #define HAVE_ATA_DMA */ |
| |
| /* Define this if a programmable hotkey is mapped */ |
| #define HAVE_HOTKEY |