utils/themeeditor/quazip/quazip.h - rockbox - Gitiles

 #ifndef QUA_ZIP_H
 #define QUA_ZIP_H

 /*
 -- A kind of "standard" GPL license statement --
 QuaZIP - a Qt/C++ wrapper for the ZIP/UNZIP package
 Copyright (C) 2005-2007 Sergey A. Tachenov

 This program is free software; you can redistribute it and/or modify it
 under the terms of the GNU General Public License as published by the
 Free Software Foundation; either version 2 of the License, or (at your
 option) any later version.

 This program is distributed in the hope that it will be useful, but
 WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
 Public License for more details.

 You should have received a copy of the GNU General Public License along
 with this program; if not, write to the Free Software Foundation, Inc.,
 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

 -- A kind of "standard" GPL license statement ends here --

 See COPYING file for GPL.

 You are also permitted to use QuaZIP under the terms of LGPL (see
 COPYING.LGPL). You are free to choose either license, but please note
 that QuaZIP makes use of Qt, which is not licensed under LGPL. So if
 you are using Open Source edition of Qt, you therefore MUST use GPL for
 your code based on QuaZIP, since it would be also based on Qt in this
 case. If you are Qt commercial license owner, then you are free to use
 QuaZIP as long as you respect either GPL or LGPL for QuaZIP code.
  **/

 #include <QString>
 #include <QTextCodec>

 #include "zip.h"
 #include "unzip.h"

 #include "quazipfileinfo.h"

 // just in case it will be defined in the later versions of the ZIP/UNZIP
 #ifndef UNZ_OPENERROR
 // define additional error code
 #define UNZ_OPENERROR -1000
 #endif

 /// ZIP archive.
 /** \class QuaZip quazip.h <quazip/quazip.h>
  * This class implements basic interface to the ZIP archive. It can be
  * used to read table contents of the ZIP archive and retreiving
  * information about the files inside it.
  *
  * You can also use this class to open files inside archive by passing
  * pointer to the instance of this class to the constructor of the
  * QuaZipFile class. But see QuaZipFile::QuaZipFile(QuaZip*, QObject*)
  * for the possible pitfalls.
  *
  * This class is indended to provide interface to the ZIP subpackage of
  * the ZIP/UNZIP package as well as to the UNZIP subpackage. But
  * currently it supports only UNZIP.
  *
  * The use of this class is simple - just create instance using
  * constructor, then set ZIP archive file name using setFile() function
  * (if you did not passed the name to the constructor), then open() and
  * then use different functions to work with it! Well, if you are
  * paranoid, you may also wish to call close before destructing the
  * instance, to check for errors on close.
  *
  * You may also use getUnzFile() and getZipFile() functions to get the
  * ZIP archive handle and use it with ZIP/UNZIP package API directly.
  *
  * This class supports localized file names inside ZIP archive, but you
  * have to set up proper codec with setCodec() function. By default,
  * locale codec will be used, which is probably ok for UNIX systems, but
  * will almost certainly fail with ZIP archives created in Windows. This
  * is because Windows ZIP programs have strange habit of using DOS
  * encoding for file names in ZIP archives. For example, ZIP archive
  * with cyrillic names created in Windows will have file names in \c
  * IBM866 encoding instead of \c WINDOWS-1251. I think that calling one
  * function is not much trouble, but for true platform independency it
  * would be nice to have some mechanism for file name encoding auto
  * detection using locale information. Does anyone know a good way to do
  * it?
  **/
 class QuaZip {
   public:
     /// Useful constants.
     enum Constants {
       MAX_FILE_NAME_LENGTH=256 /**< Maximum file name length. Taken from
                                  \c UNZ_MAXFILENAMEINZIP constant in
                                  unzip.c. */
     };
     /// Open mode of the ZIP file.
     enum Mode {
       mdNotOpen, ///< ZIP file is not open. This is the initial mode.
       mdUnzip, ///< ZIP file is open for reading files inside it.
       mdCreate, ///< ZIP file was created with open() call.
       mdAppend, /**< ZIP file was opened in append mode. This refers to
                   * \c APPEND_STATUS_CREATEAFTER mode in ZIP/UNZIP package
                   * and means that zip is appended to some existing file
                   * what is useful when that file contains
                   * self-extractor code. This is obviously \em not what
                   * you whant to use to add files to the existing ZIP
                   * archive.
                   **/
       mdAdd ///< ZIP file was opened for adding files in the archive.
     };
     /// Case sensitivity for the file names.
     /** This is what you specify when accessing files in the archive.
      * Works perfectly fine with any characters thanks to Qt's great
      * unicode support. This is different from ZIP/UNZIP API, where
      * only US-ASCII characters was supported.
      **/
     enum CaseSensitivity {
       csDefault=0, ///< Default for platform. Case sensitive for UNIX, not for Windows.
       csSensitive=1, ///< Case sensitive.
       csInsensitive=2 ///< Case insensitive.
     };
   private:
     QTextCodec *fileNameCodec, *commentCodec;
     QString zipName;
     QString comment;
     Mode mode;
     union {
       unzFile unzFile_f;
       zipFile zipFile_f;
     };
     bool hasCurrentFile_f;
     int zipError;
     // not (and will not be) implemented
     QuaZip(const QuaZip& that);
     // not (and will not be) implemented
     QuaZip& operator=(const QuaZip& that);
   public:
     /// Constructs QuaZip object.
     /** Call setName() before opening constructed object. */
     QuaZip();
     /// Constructs QuaZip object associated with ZIP file \a zipName.
     QuaZip(const QString& zipName);
     /// Destroys QuaZip object.
     /** Calls close() if necessary. */
     ~QuaZip();
     /// Opens ZIP file.
     /** Argument \a ioApi specifies IO function set for ZIP/UNZIP
      * package to use. See unzip.h, zip.h and ioapi.h for details. By
      * passing NULL (the default) you just tell package to use the
      * default API which works just fine on UNIX platforms. I have tried
      * it on win32-g++ platform too and it seems it works fine there
      * too, so I see no reason to use win32 IO API included in original
      * ZIP/UNZIP package.
      *
      * ZIP archive file name will be converted to 8-bit encoding using
      * Qt's QFile::encodeName() function before passing it to the
      * ZIP/UNZIP package API.
      *
      * Returns \c true if successful, \c false otherwise.
      *
      * Argument \a mode specifies open mode of the ZIP archive. See Mode
      * for details. Note that there is zipOpen2() function in the
      * ZIP/UNZIP API which accepts \a globalcomment argument, but it
      * does not use it anywhere, so this open() function does not have this
      * argument. See setComment() if you need to set global comment.
      *
      * \note ZIP/UNZIP API open calls do not return error code - they
      * just return \c NULL indicating an error. But to make things
      * easier, quazip.h header defines additional error code \c
      * UNZ_ERROROPEN and getZipError() will return it if the open call
      * of the ZIP/UNZIP API returns \c NULL.
      **/
     bool open(Mode mode, zlib_filefunc_def *ioApi =NULL);
     /// Closes ZIP file.
     /** Call getZipError() to determine if the close was successful. */
     void close();
     /// Sets the codec used to encode/decode file names inside archive.
     /** This is necessary to access files in the ZIP archive created
      * under Windows with non-latin characters in file names. For
      * example, file names with cyrillic letters will be in \c IBM866
      * encoding.
      **/
     void setFileNameCodec(QTextCodec *fileNameCodec)
     {this->fileNameCodec=fileNameCodec;}
     /// Sets the codec used to encode/decode file names inside archive.
     /** \overload
      * Equivalent to calling setFileNameCodec(QTextCodec::codecForName(codecName));
      **/
     void setFileNameCodec(const char *fileNameCodecName)
     {fileNameCodec=QTextCodec::codecForName(fileNameCodecName);}
     /// Returns the codec used to encode/decode comments inside archive.
     QTextCodec* getFileNameCodec()const {return fileNameCodec;}
     /// Sets the codec used to encode/decode comments inside archive.
     /** This codec defaults to locale codec, which is probably ok.
      **/
     void setCommentCodec(QTextCodec *commentCodec)
     {this->commentCodec=commentCodec;}
     /// Sets the codec used to encode/decode comments inside archive.
     /** \overload
      * Equivalent to calling setCommentCodec(QTextCodec::codecForName(codecName));
      **/
     void setCommentCodec(const char *commentCodecName)
     {commentCodec=QTextCodec::codecForName(commentCodecName);}
     /// Returns the codec used to encode/decode comments inside archive.
     QTextCodec* getCommentCodec()const {return commentCodec;}
     /// Returns the name of the ZIP file.
     /** Returns null string if no ZIP file name has been set.
      * \sa setZipName()
      **/
     QString getZipName()const {return zipName;}
     /// Sets the name of the ZIP file.
     /** Does nothing if the ZIP file is open.
      *
      * Does not reset error code returned by getZipError().
      **/
     void setZipName(const QString& zipName);
     /// Returns the mode in which ZIP file was opened.
     Mode getMode()const {return mode;}
     /// Returns \c true if ZIP file is open, \c false otherwise.
     bool isOpen()const {return mode!=mdNotOpen;}
     /// Returns the error code of the last operation.
     /** Returns \c UNZ_OK if the last operation was successful.
      *
      * Error code resets to \c UNZ_OK every time you call any function
      * that accesses something inside ZIP archive, even if it is \c
      * const (like getEntriesCount()). open() and close() calls reset
      * error code too. See documentation for the specific functions for
      * details on error detection.
      **/
     int getZipError()const {return zipError;}
     /// Returns number of the entries in the ZIP central directory.
     /** Returns negative error code in the case of error. The same error
      * code will be returned by subsequent getZipError() call.
      **/
     int getEntriesCount()const;
     /// Returns global comment in the ZIP file.
     QString getComment()const;
     /// Sets global comment in the ZIP file.
     /** Comment will be written to the archive on close operation.
      *
      * \sa open()
      **/
     void setComment(const QString& comment) {this->comment=comment;}
     /// Sets the current file to the first file in the archive.
     /** Returns \c true on success, \c false otherwise. Call
      * getZipError() to get the error code.
      **/
     bool goToFirstFile();
     /// Sets the current file to the next file in the archive.
     /** Returns \c true on success, \c false otherwise. Call
      * getZipError() to determine if there was an error.
      *
      * Should be used only in QuaZip::mdUnzip mode.
      *
      * \note If the end of file was reached, getZipError() will return
      * \c UNZ_OK instead of \c UNZ_END_OF_LIST_OF_FILE. This is to make
      * things like this easier:
      * \code
      * for(bool more=zip.goToFirstFile(); more; more=zip.goToNextFile()) {
      *   // do something
      * }
      * if(zip.getZipError()==UNZ_OK) {
      *   // ok, there was no error
      * }
      * \endcode
      **/
     bool goToNextFile();
     /// Sets current file by its name.
     /** Returns \c true if successful, \c false otherwise. Argument \a
      * cs specifies case sensitivity of the file name. Call
      * getZipError() in the case of a failure to get error code.
      *
      * This is not a wrapper to unzLocateFile() function. That is
      * because I had to implement locale-specific case-insensitive
      * comparison.
      *
      * Here are the differences from the original implementation:
      *
      * - If the file was not found, error code is \c UNZ_OK, not \c
      *   UNZ_END_OF_LIST_OF_FILE (see also goToNextFile()).
      * - If this function fails, it unsets the current file rather than
      *   resetting it back to what it was before the call.
      *
      * If \a fileName is null string then this function unsets the
      * current file and return \c true. Note that you should close the
      * file first if it is open! See
      * QuaZipFile::QuaZipFile(QuaZip*,QObject*) for the details.
      *
      * Should be used only in QuaZip::mdUnzip mode.
      *
      * \sa setFileNameCodec(), CaseSensitivity
      **/
     bool setCurrentFile(const QString& fileName, CaseSensitivity cs =csDefault);
     /// Returns \c true if the current file has been set.
     bool hasCurrentFile()const {return hasCurrentFile_f;}
     /// Retrieves information about the current file.
     /** Fills the structure pointed by \a info. Returns \c true on
      * success, \c false otherwise. In the latter case structure pointed
      * by \a info remains untouched. If there was an error,
      * getZipError() returns error code.
      *
      * Should be used only in QuaZip::mdUnzip mode.
      *
      * Does nothing and returns \c false in any of the following cases.
      * - ZIP is not open;
      * - ZIP does not have current file;
      * - \a info is \c NULL;
      *
      * In all these cases getZipError() returns \c UNZ_OK since there
      * is no ZIP/UNZIP API call.
      **/
     bool getCurrentFileInfo(QuaZipFileInfo* info)const;
     /// Returns the current file name.
     /** Equivalent to calling getCurrentFileInfo() and then getting \c
      * name field of the QuaZipFileInfo structure, but faster and more
      * convenient.
      *
      * Should be used only in QuaZip::mdUnzip mode.
      **/
     QString getCurrentFileName()const;
     /// Returns \c unzFile handle.
     /** You can use this handle to directly call UNZIP part of the
      * ZIP/UNZIP package functions (see unzip.h).
      *
      * \warning When using the handle returned by this function, please
      * keep in mind that QuaZip class is unable to detect any changes
      * you make in the ZIP file state (e. g. changing current file, or
      * closing the handle). So please do not do anything with this
      * handle that is possible to do with the functions of this class.
      * Or at least return the handle in the original state before
      * calling some another function of this class (including implicit
      * destructor calls and calls from the QuaZipFile objects that refer
      * to this QuaZip instance!). So if you have changed the current
      * file in the ZIP archive - then change it back or you may
      * experience some strange behavior or even crashes.
      **/
     unzFile getUnzFile() {return unzFile_f;}
     /// Returns \c zipFile handle.
     /** You can use this handle to directly call ZIP part of the
      * ZIP/UNZIP package functions (see zip.h). Warnings about the
      * getUnzFile() function also apply to this function.
      **/
     zipFile getZipFile() {return zipFile_f;}
 };

 #endif
	#ifndef QUA_ZIP_H
	#define QUA_ZIP_H

	/*
	-- A kind of "standard" GPL license statement --
	QuaZIP - a Qt/C++ wrapper for the ZIP/UNZIP package
	Copyright (C) 2005-2007 Sergey A. Tachenov

	This program is free software; you can redistribute it and/or modify it
	under the terms of the GNU General Public License as published by the
	Free Software Foundation; either version 2 of the License, or (at your
	option) any later version.

	This program is distributed in the hope that it will be useful, but
	WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
	Public License for more details.

	You should have received a copy of the GNU General Public License along
	with this program; if not, write to the Free Software Foundation, Inc.,
	59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

	-- A kind of "standard" GPL license statement ends here --

	See COPYING file for GPL.

	You are also permitted to use QuaZIP under the terms of LGPL (see
	COPYING.LGPL). You are free to choose either license, but please note
	that QuaZIP makes use of Qt, which is not licensed under LGPL. So if
	you are using Open Source edition of Qt, you therefore MUST use GPL for
	your code based on QuaZIP, since it would be also based on Qt in this
	case. If you are Qt commercial license owner, then you are free to use
	QuaZIP as long as you respect either GPL or LGPL for QuaZIP code.
	**/

	#include <QString>
	#include <QTextCodec>

	#include "zip.h"
	#include "unzip.h"

	#include "quazipfileinfo.h"

	// just in case it will be defined in the later versions of the ZIP/UNZIP
	#ifndef UNZ_OPENERROR
	// define additional error code
	#define UNZ_OPENERROR -1000
	#endif

	/// ZIP archive.
	/** \class QuaZip quazip.h <quazip/quazip.h>
	* This class implements basic interface to the ZIP archive. It can be
	* used to read table contents of the ZIP archive and retreiving
	* information about the files inside it.
	*
	* You can also use this class to open files inside archive by passing
	* pointer to the instance of this class to the constructor of the
	* QuaZipFile class. But see QuaZipFile::QuaZipFile(QuaZip, QObject)
	* for the possible pitfalls.
	*
	* This class is indended to provide interface to the ZIP subpackage of
	* the ZIP/UNZIP package as well as to the UNZIP subpackage. But
	* currently it supports only UNZIP.
	*
	* The use of this class is simple - just create instance using
	* constructor, then set ZIP archive file name using setFile() function
	* (if you did not passed the name to the constructor), then open() and
	* then use different functions to work with it! Well, if you are
	* paranoid, you may also wish to call close before destructing the
	* instance, to check for errors on close.
	*
	* You may also use getUnzFile() and getZipFile() functions to get the
	* ZIP archive handle and use it with ZIP/UNZIP package API directly.
	*
	* This class supports localized file names inside ZIP archive, but you
	* have to set up proper codec with setCodec() function. By default,
	* locale codec will be used, which is probably ok for UNIX systems, but
	* will almost certainly fail with ZIP archives created in Windows. This
	* is because Windows ZIP programs have strange habit of using DOS
	* encoding for file names in ZIP archives. For example, ZIP archive
	* with cyrillic names created in Windows will have file names in \c
	* IBM866 encoding instead of \c WINDOWS-1251. I think that calling one
	* function is not much trouble, but for true platform independency it
	* would be nice to have some mechanism for file name encoding auto
	* detection using locale information. Does anyone know a good way to do
	* it?
	**/
	class QuaZip {
	public:
	/// Useful constants.
	enum Constants {
	MAX_FILE_NAME_LENGTH=256 /**< Maximum file name length. Taken from
	\c UNZ_MAXFILENAMEINZIP constant in
	unzip.c. */
	};
	/// Open mode of the ZIP file.
	enum Mode {
	mdNotOpen, ///< ZIP file is not open. This is the initial mode.
	mdUnzip, ///< ZIP file is open for reading files inside it.
	mdCreate, ///< ZIP file was created with open() call.
	mdAppend, /**< ZIP file was opened in append mode. This refers to
	* \c APPEND_STATUS_CREATEAFTER mode in ZIP/UNZIP package
	* and means that zip is appended to some existing file
	* what is useful when that file contains
	* self-extractor code. This is obviously \em not what
	* you whant to use to add files to the existing ZIP
	* archive.
	**/
	mdAdd ///< ZIP file was opened for adding files in the archive.
	};
	/// Case sensitivity for the file names.
	/** This is what you specify when accessing files in the archive.
	* Works perfectly fine with any characters thanks to Qt's great
	* unicode support. This is different from ZIP/UNZIP API, where
	* only US-ASCII characters was supported.
	**/
	enum CaseSensitivity {
	csDefault=0, ///< Default for platform. Case sensitive for UNIX, not for Windows.
	csSensitive=1, ///< Case sensitive.
	csInsensitive=2 ///< Case insensitive.
	};
	private:
	QTextCodec fileNameCodec, commentCodec;
	QString zipName;
	QString comment;
	Mode mode;
	union {
	unzFile unzFile_f;
	zipFile zipFile_f;
	};
	bool hasCurrentFile_f;
	int zipError;
	// not (and will not be) implemented
	QuaZip(const QuaZip& that);
	// not (and will not be) implemented
	QuaZip& operator=(const QuaZip& that);
	public:
	/// Constructs QuaZip object.
	/** Call setName() before opening constructed object. */
	QuaZip();
	/// Constructs QuaZip object associated with ZIP file \a zipName.
	QuaZip(const QString& zipName);
	/// Destroys QuaZip object.
	/** Calls close() if necessary. */
	~QuaZip();
	/// Opens ZIP file.
	/** Argument \a ioApi specifies IO function set for ZIP/UNZIP
	* package to use. See unzip.h, zip.h and ioapi.h for details. By
	* passing NULL (the default) you just tell package to use the
	* default API which works just fine on UNIX platforms. I have tried
	* it on win32-g++ platform too and it seems it works fine there
	* too, so I see no reason to use win32 IO API included in original
	* ZIP/UNZIP package.
	*
	* ZIP archive file name will be converted to 8-bit encoding using
	* Qt's QFile::encodeName() function before passing it to the
	* ZIP/UNZIP package API.
	*
	* Returns \c true if successful, \c false otherwise.
	*
	* Argument \a mode specifies open mode of the ZIP archive. See Mode
	* for details. Note that there is zipOpen2() function in the
	* ZIP/UNZIP API which accepts \a globalcomment argument, but it
	* does not use it anywhere, so this open() function does not have this
	* argument. See setComment() if you need to set global comment.
	*
	* \note ZIP/UNZIP API open calls do not return error code - they
	* just return \c NULL indicating an error. But to make things
	* easier, quazip.h header defines additional error code \c
	* UNZ_ERROROPEN and getZipError() will return it if the open call
	* of the ZIP/UNZIP API returns \c NULL.
	**/
	bool open(Mode mode, zlib_filefunc_def *ioApi =NULL);
	/// Closes ZIP file.
	/** Call getZipError() to determine if the close was successful. */
	void close();
	/// Sets the codec used to encode/decode file names inside archive.
	/** This is necessary to access files in the ZIP archive created
	* under Windows with non-latin characters in file names. For
	* example, file names with cyrillic letters will be in \c IBM866
	* encoding.
	**/
	void setFileNameCodec(QTextCodec *fileNameCodec)
	{this->fileNameCodec=fileNameCodec;}
	/// Sets the codec used to encode/decode file names inside archive.
	/** \overload
	* Equivalent to calling setFileNameCodec(QTextCodec::codecForName(codecName));
	**/
	void setFileNameCodec(const char *fileNameCodecName)
	{fileNameCodec=QTextCodec::codecForName(fileNameCodecName);}
	/// Returns the codec used to encode/decode comments inside archive.
	QTextCodec* getFileNameCodec()const {return fileNameCodec;}
	/// Sets the codec used to encode/decode comments inside archive.
	/** This codec defaults to locale codec, which is probably ok.
	**/
	void setCommentCodec(QTextCodec *commentCodec)
	{this->commentCodec=commentCodec;}
	/// Sets the codec used to encode/decode comments inside archive.
	/** \overload
	* Equivalent to calling setCommentCodec(QTextCodec::codecForName(codecName));
	**/
	void setCommentCodec(const char *commentCodecName)
	{commentCodec=QTextCodec::codecForName(commentCodecName);}
	/// Returns the codec used to encode/decode comments inside archive.
	QTextCodec* getCommentCodec()const {return commentCodec;}
	/// Returns the name of the ZIP file.
	/** Returns null string if no ZIP file name has been set.
	* \sa setZipName()
	**/
	QString getZipName()const {return zipName;}
	/// Sets the name of the ZIP file.
	/** Does nothing if the ZIP file is open.
	*
	* Does not reset error code returned by getZipError().
	**/
	void setZipName(const QString& zipName);
	/// Returns the mode in which ZIP file was opened.
	Mode getMode()const {return mode;}
	/// Returns \c true if ZIP file is open, \c false otherwise.
	bool isOpen()const {return mode!=mdNotOpen;}
	/// Returns the error code of the last operation.
	/** Returns \c UNZ_OK if the last operation was successful.
	*
	* Error code resets to \c UNZ_OK every time you call any function
	* that accesses something inside ZIP archive, even if it is \c
	* const (like getEntriesCount()). open() and close() calls reset
	* error code too. See documentation for the specific functions for
	* details on error detection.
	**/
	int getZipError()const {return zipError;}
	/// Returns number of the entries in the ZIP central directory.
	/** Returns negative error code in the case of error. The same error
	* code will be returned by subsequent getZipError() call.
	**/
	int getEntriesCount()const;
	/// Returns global comment in the ZIP file.
	QString getComment()const;
	/// Sets global comment in the ZIP file.
	/** Comment will be written to the archive on close operation.
	*
	* \sa open()
	**/
	void setComment(const QString& comment) {this->comment=comment;}
	/// Sets the current file to the first file in the archive.
	/** Returns \c true on success, \c false otherwise. Call
	* getZipError() to get the error code.
	**/
	bool goToFirstFile();
	/// Sets the current file to the next file in the archive.
	/** Returns \c true on success, \c false otherwise. Call
	* getZipError() to determine if there was an error.
	*
	* Should be used only in QuaZip::mdUnzip mode.
	*
	* \note If the end of file was reached, getZipError() will return
	* \c UNZ_OK instead of \c UNZ_END_OF_LIST_OF_FILE. This is to make
	* things like this easier:
	* \code
	* for(bool more=zip.goToFirstFile(); more; more=zip.goToNextFile()) {
	* // do something
	* }
	* if(zip.getZipError()==UNZ_OK) {
	* // ok, there was no error
	* }
	* \endcode
	**/
	bool goToNextFile();
	/// Sets current file by its name.
	/** Returns \c true if successful, \c false otherwise. Argument \a
	* cs specifies case sensitivity of the file name. Call
	* getZipError() in the case of a failure to get error code.
	*
	* This is not a wrapper to unzLocateFile() function. That is
	* because I had to implement locale-specific case-insensitive
	* comparison.
	*
	* Here are the differences from the original implementation:
	*
	* - If the file was not found, error code is \c UNZ_OK, not \c
	* UNZ_END_OF_LIST_OF_FILE (see also goToNextFile()).
	* - If this function fails, it unsets the current file rather than
	* resetting it back to what it was before the call.
	*
	* If \a fileName is null string then this function unsets the
	* current file and return \c true. Note that you should close the
	* file first if it is open! See
	* QuaZipFile::QuaZipFile(QuaZip,QObject) for the details.
	*
	* Should be used only in QuaZip::mdUnzip mode.
	*
	* \sa setFileNameCodec(), CaseSensitivity
	**/
	bool setCurrentFile(const QString& fileName, CaseSensitivity cs =csDefault);
	/// Returns \c true if the current file has been set.
	bool hasCurrentFile()const {return hasCurrentFile_f;}
	/// Retrieves information about the current file.
	/** Fills the structure pointed by \a info. Returns \c true on
	* success, \c false otherwise. In the latter case structure pointed
	* by \a info remains untouched. If there was an error,
	* getZipError() returns error code.
	*
	* Should be used only in QuaZip::mdUnzip mode.
	*
	* Does nothing and returns \c false in any of the following cases.
	* - ZIP is not open;
	* - ZIP does not have current file;
	* - \a info is \c NULL;
	*
	* In all these cases getZipError() returns \c UNZ_OK since there
	* is no ZIP/UNZIP API call.
	**/
	bool getCurrentFileInfo(QuaZipFileInfo* info)const;
	/// Returns the current file name.
	/** Equivalent to calling getCurrentFileInfo() and then getting \c
	* name field of the QuaZipFileInfo structure, but faster and more
	* convenient.
	*
	* Should be used only in QuaZip::mdUnzip mode.
	**/
	QString getCurrentFileName()const;
	/// Returns \c unzFile handle.
	/** You can use this handle to directly call UNZIP part of the
	* ZIP/UNZIP package functions (see unzip.h).
	*
	* \warning When using the handle returned by this function, please
	* keep in mind that QuaZip class is unable to detect any changes
	* you make in the ZIP file state (e. g. changing current file, or
	* closing the handle). So please do not do anything with this
	* handle that is possible to do with the functions of this class.
	* Or at least return the handle in the original state before
	* calling some another function of this class (including implicit
	* destructor calls and calls from the QuaZipFile objects that refer
	* to this QuaZip instance!). So if you have changed the current
	* file in the ZIP archive - then change it back or you may
	* experience some strange behavior or even crashes.
	**/
	unzFile getUnzFile() {return unzFile_f;}
	/// Returns \c zipFile handle.
	/** You can use this handle to directly call ZIP part of the
	* ZIP/UNZIP package functions (see zip.h). Warnings about the
	* getUnzFile() function also apply to this function.
	**/
	zipFile getZipFile() {return zipFile_f;}
	};

	#endif