| % $Id$ % |
| \section{\label{ref:SystemOptions}System} |
| |
| \nopt{sansa,fuzeplus}%will probably be there on Sansas one day - exclude it the simple way without specific option |
| {\nopt{sansaAMS}{ |
| \subsection{Battery} |
| Options relating to the \opt{archos}{batteries}\nopt{archos}{battery} |
| in the \dap. |
| \begin{description} |
| \item [Battery Capacity.] This setting can be used to tell Rockbox what |
| capacity (in mAh) the battery being used has. The default is |
| \opt{player,recorder}{1500~mAh}% |
| \opt{recorderv2fm}{2200~mAh}% |
| \opt{ondiosp,ondiofm,vibe500}{1000~mAh}% |
| \opt{iriverh100,iriverh300}{1300~mAh}% |
| \opt{mpiohd200}{850~mAh}% |
| \opt{ipodmini}{400~mAh (1G) or 630~mAh (2G)}% |
| \opt{ipodcolor}{700~mAh}% |
| \opt{ipodnano}{300~mAh}% |
| \opt{ipodvideo}{400~mAh (30~GB) or 600~mAh (60~GB and 80~GB)}% |
| \opt{ipod4g}{630~mAh}% |
| \opt{ipod3g}{630~mAh}% |
| \opt{ipod1g2g}{1200~mAh}% |
| \opt{iaudiom3,iaudiom5,iaudiox5}{950~mAh}% |
| \opt{gigabeatf}{2000~mAh}% |
| \opt{gigabeats}{700~mAh}% |
| \opt{cowond2}{1600~mAh}% |
| \opt{mrobe100}{720~mAh}% |
| \opt{samsungyh920,samsungyh925}{900~mAh}% |
| \opt{samsungyh820}{650~mAh}% |
| , which is the capacity value for the standard |
| \opt{archos}{batteries}\nopt{archos}{battery} shipped with the \dap. |
| Rockbox uses this value for runtime estimation, not battery percentage |
| calculation. Changing this setting has no effect whatsoever on |
| actual battery life. This setting only affects the accuracy of the |
| runtime estimation as shown on screen. |
| \opt{iaudiom3,iaudiom5,iaudiox5}{Rockbox does not automatically distinguish |
| between the ``L'' models and the ``simple'' models which determine the |
| default value. If your \dap{} is an |
| \opt{iaudiom3}{M3L}% |
| \opt{iaudiom5}{M5L}% |
| \opt{iaudiox5}{X5L} |
| set the value to 2250~mAh for more accuracy in the runtime estimation.} |
| \opt{ipod,sansa}{This value is fairly meaningless in the \playerman{} |
| family at present, and work is on-going into finding a better way to |
| determine battery life.} |
| |
| \opt{battery_types}{ |
| \item [Battery Type.] This setting tells Rockbox which type of battery |
| is currently used in the \dap{}. The two supported battery types are |
| ``Alkaline'' or ``NiMH''.} |
| |
| \opt{usb_charging_enable}{ |
| \item [Charge During USB Connection.] This option lets you control whether |
| the \dap{} should charge during the USB connection and hence draw the |
| full 500~mA. Turning it \setting{Off} is recommended if the \dap{} is |
| connected through an unpowered USB hub or a laptop port. To use a USB |
| AC adapter, select \setting{Force} to instruct the \dap{} to also |
| charge when USB power is available but no connection is established. |
| } |
| |
| \end{description} |
| }} |
| \opt{dircache,HAVE_DISK_STORAGE}{ |
| \subsection{Disk} |
| Options relating to the hard disk. |
| |
| \begin{description} |
| \opt{HAVE_DISK_STORAGE}{ |
| \item [Disk Spindown.] Rockbox has a timer that makes it spin down the |
| hard disk after it is idle for a certain amount of time. This setting |
| controls the amount of time between the last user activity and the time |
| that the disk spins down. This idle time is only affected by user |
| activity, like navigating through the \setting{File Browser}. When the |
| hard disk spins up to fill the audio buffer, it automatically spins down |
| afterwards. |
| } |
| |
| \opt{dircache}{ |
| \item [Directory Cache.] Rockbox has the ability to cache the contents of |
| your drive in RAM. The \setting{Directory Cache} takes a small amount of |
| memory away from Rockbox that would otherwise be used to buffer music, |
| but it speeds up navigation in the file browser by eliminating |
| the slight pause between the time a navigation button is pressed and the |
| time Rockbox responds. Turning this setting on activates the |
| directory cache, and turning it off deactivates the directory |
| cache. |
| \note{The first time you enable the directory cache, |
| Rockbox will request a reboot of the \dap{} and upon restarting take a few |
| minutes to scan the drive. After this, the directory cache will work in the |
| background.} |
| } |
| \end{description} |
| } % \opt{dircache,HAVE_DISK_STORAGE} |
| |
| \subsection{Limits} |
| This sub menu relates to limits in the Rockbox operating system. |
| \begin{description} |
| \item [Max Entries in File Browser.] This setting controls the limit on |
| the number of files that you can see in any particular directory in the |
| file browser. You can configure the size to be between 50 and |
| 10,000 files in steps of 50. The default is 400. Higher values will shorten |
| the music buffer, so you should increase this setting \emph{only} if you have |
| directories with a large number of files. |
| |
| \item [Max Playlist Size.] This setting controls the maximum size of |
| a playlist. The playlist size can be between 1,000 and 32,000 files, |
| in steps of 1,000 (default is 10,000). Higher values will shorten the |
| music buffer, so you should increase this setting \emph{only} if you |
| have very large playlists. |
| |
| \item [Glyphs To Cache.] This sets the default memory allocation size |
| for fonts in unique glyphs. This should be set to the number of unique |
| language glyphs and punctuation marks that are frequently displayed. |
| The default is 250. |
| \end{description} |
| \note{You will need to restart your player for changes to \setting{Max |
| Entries in File Browser} or \setting{Max Playlist Size} to take effect |
| while \setting{Glyphs To Cache} will affect the next font load.} |
| % TODO: this needs to be rewritten in another style, it lets you mix sound from another source into the music |
| \opt{player}{ |
| \subsection{Line In} This option activates the line-in port on \dap, which is |
| off by default. This is useful for such applications as: |
| \begin{itemize} |
| \item Game boy $\rightarrow$ \dap $\rightarrow$ human |
| \item laptop $\rightarrow$ \dap $\rightarrow$ human |
| \item LAN party computer $\rightarrow$ \dap $\rightarrow$ human |
| \end{itemize} |
| } |
| \opt{quickscreen}{ |
| \subsection{Use Shortcuts Menu Instead of Quick Screen} This option |
| activates the shortcuts menu instead of opening the quick screen when enabled. |
| } |
| \opt{HAVE_CAR_ADAPTER_MODE}{ |
| \subsection{Car Adapter Mode} |
| This option turns \setting{On} and \setting{Off} the car ignition |
| auto stop function. |
| \begin{description} |
| \item [Car Adapter Mode.] When using the \dap{} in a car, |
| \setting{Car Adapter Mode} automatically stops playback on the \dap{} when |
| power (i.e. from cigarette lighter power adapter) to the external DC in jack |
| is turned off. If the \setting{Car Adapter Mode} is set to \setting{On}, |
| Rockbox will pause playback when the external power off condition is |
| detected. Rockbox will then shutdown the \dap{} after the length of time set |
| in the \setting{Idle Poweroff} setting |
| (see \reference{ref:IdlePoweroffSetting}). |
| If power to the DC in jack is turned back on before the \emph{Idle Poweroff} |
| function has shut the \dap{} off, playback will be resumed 5 seconds after |
| the power is applied. This delay is to allow for the time while the car |
| engine is being started. |
| \end{description} |
| |
| Once the \dap{} is shut off either manually, or automatically with the |
| \setting{Idle Poweroff} function, it must be powered up manually to resume |
| playback. |
| } |
| |
| \opt{accessory_supply}{ |
| \subsection{\label{ref:AccessoryPowerSupply}Accessory Power Supply} |
| This option turns the accessory power supply \setting{On} and \setting{Off}. |
| The Apple accessory protocol has been partially implemented in Rockbox, and |
| thus there is a reasonable chance that your favourite accessory will work. |
| The accessory may require power from the \dap{} to function, and if so you should turn |
| this option \setting{On}. If it is not required, then turning this setting |
| \setting{Off} will save battery and therefore result in better runtime. |
| } |
| |
| \opt{lineout_poweroff}{ |
| \subsection{\label{ref:LineoutOnOff}Line Out} |
| This option turns the \dap{}'s line-out \setting{On} and \setting{Off}. On some |
| devices an enabled line-out will consume some power even if not used. If it is |
| not required, then turning this setting \setting{Off} will save battery and |
| therefore result in better runtime. |
| } |
| |
| \opt{HAVE_BUTTON_LIGHTS}{ |
| \opt{e200,e200v2}{ |
| \subsection{Wheel Light Timeout} |
| This setting controls the amount of time the wheel lights shine after a |
| button press or wheel turn. If set to \setting{Off}, the LEDs will not |
| light when a button is pressed. If set to \setting{On}, the lights will |
| never shut off. If set to a time (1 to 120 seconds), the wheel will stay |
| lit for that amount of time after a button press or wheel turn. |
| } |
| \nopt{e200,e200v2}{ |
| \subsection{Button Light Timeout} |
| This setting controls the amount of time the button lights shine after a |
| button press. If set to \setting{Off}, the LEDs will not light when a |
| button is pressed. If set to \setting{On}, the lights will never shut off. |
| If set to a time (1 to 120 seconds), the buttons will stay lit for |
| that amount of time after a button press. |
| } |
| \opt{gigabeatf}{ |
| \subsection{Button Light Brightness} |
| Changes the brightness of the button lights. |
| } |
| } |
| |
| \opt{swcodec}{ |
| \subsection{Keyclick} |
| This menu controls key clicks on button presses. |
| \begin{description} |
| \opt{hardware_click}{ |
| \item [Headphone Keyclick. ]This setting controls how strong the keyclicks |
| played through the headphones are. If set to \setting{Off}, the keyclicks |
| will be disabled. |
| \item [Speaker Keyclick. ]This setting turns playing of keyclicks through |
| the built in speaker \setting{On} or \setting{Off}. |
| } |
| \nopt{hardware_click}{ |
| \item [Keyclick. ]This setting controls how strong the keyclicks are. |
| If set to \setting{Off}, the keyclicks will be disabled. |
| } |
| \item [Keyclick repeats.] This setting turns keyclick repeats \setting{On} |
| and \setting{Off}. If set to \setting{On}, the keyclicks will be |
| repeated when you hold down a button. If set to \setting{Off}, you will |
| hear only one click. |
| \end{description} |
| } |
| |
| \opt{touchpad}{ |
| \subsection{Touchpad} |
| These settings control the functions of touchpad devices. |
| \begin{description} |
| \opt{SANSA_FUZEPLUS_PAD,GIGABEAT_PAD}{ |
| \item [Touchpad Sensitivity. ]This setting controls the amount of pressure needed to |
| register a touchpad press. If set to \opt{SANSA_FUZEPLUS_PAD}{\setting{25}}\opt{GIGABEAT_PAD} |
| {\setting{High}} the lightest touch will register. If set to \opt{SANSA_FUZEPLUS_PAD} |
| {\setting{-25}}\opt{GIGABEAT_PAD}{\setting{Normal}} a firmer press will be needed to register |
| on the touchpad. |
| } |
| \end{description} |
| \begin{description} |
| \opt{touchpad_deadzone}{ |
| \item [Touchpad Deadzone. ]This setting controls the size of a configurable deadzone |
| where touch events between virtual keys are ignored. If set to \opt{SANSA_FUZEPLUS_PAD} |
| {\setting{0}} there is effectively no deadzone. If set to \opt{SANSA_FUZEPLUS_PAD} |
| {\setting{100}} the deadzones between each virtual button are set to a maximuim |
| 400px. |
| } |
| \end{description} |
| } |
| |
| |
| |
| |
| \nopt{hold_button}{ |
| \subsection{Advanced Key Lock} |
| This option allows users to select actions that when within WPS or FMS will \emph{not} be |
| blocked by the key lock (software hold switch). |
| |
| |
| \begin{description} |
| \item[Enabled.] |
| Enables/disables the feature. |
| |
| \item[Settings.] |
| Allows to select actions that will \emph{not} be blocked by the key lock. |
| \begin{itemize} |
| \item[Volume.] |
| Volume up/down. |
| \item[Play.] |
| Toggling Play/Pause. |
| \item[Seek.] |
| Seeking in a track. |
| \item[Skip.] |
| Skipping of a track. |
| \opt{HAVE_BACKLIGHT}{ |
| \item[Autolock On.] |
| When the backlight turns off, softlock will lock the screen, |
| activates when you press the lock key and if you manually lock |
| again, while active it then disables autolock. |
| \begin{itemize} |
| \item |
| (Lock Button Pressed \#1) >Auto Lock On |
| (device still unlocked till backlight timeout). |
| \item |
| (Lock Button Pressed \#2) >Auto Lock Off (device locked). |
| \item |
| (Lock Button Pressed \#3) >(device unlocked). |
| \end{itemize} |
| } %\opt{HAVE_BACKLIGHT} |
| \opt{touchpad}{ |
| \item[Disable Touch.] |
| Blocks touch screen buttons like the original. |
| } |
| \item[Disable Notify.] |
| Suppresses the notification 'Buttons Locked' |
| (still will if power button is pressed). |
| \note{This is a pre-requisite for \setting{selectivebacklight} |
| \reference{ref:selectivebacklight} to work also during key lock.} |
| |
| \end{itemize} |
| Selected actions are indicated by a leading +. |
| Note: If all options get de-selected, the entire feature is disabled. |
| |
| \end{description} |
| } %\nopt{hold_button} |
| |
| |
| \opt{usb_hid}{ |
| \subsection{\label{ref:USB_HID}USB HID} |
| This option turns the USB HID feature \setting{On} and \setting{Off}. |
| When this feature is enabled, the \dap{} enumerates as a Human Interface |
| Device (HID), composed of several HID sub devices. |
| Since the \dap{} also enumerates as a Mass Storage Device, it becomes a USB |
| Composite Device, which contains both these devices. |
| |
| \subsection{USB Keypad Mode} |
| This setting control the keypad mode when the \dap{} is attached to a |
| computer through USB. Pressing a key on the \dap{} sends a keystroke the |
| computer the \dap{} is attached to, according to the mapping set by the |
| keypad mode. There are different modes which provide different |
| functionality. |
| \opt{SANSA_E200_PAD,GIGABEAT_S_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD% |
| ,IRIVER_H10_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD% |
| ,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD,SAMSUNG_YH92X_PAD% |
| ,SAMSUNG_YH820_PAD}{% |
| Switching modes back and forth is done by pressing the |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD}{\ButtonRec}% |
| \opt{GIGABEAT_S_PAD,SANSA_CLIP_PAD,MROBE100_PAD,IRIVER_H10_PAD,SANSA_FUZEPLUS_PAD}% |
| {\ButtonPower}% |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD}{\ButtonSelect+\ButtonRight} |
| \opt{PBELL_VIBE500_PAD}{\ButtonOK+\ButtonLeft} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRec+\ButtonRew} |
| and |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD}{Long \ButtonRec}% |
| \opt{GIGABEAT_S_PAD,SANSA_CLIP_PAD,MROBE100_PAD,IRIVER_H10_PAD,SANSA_FUZEPLUS_PAD} |
| {Long \ButtonPower}% |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD}{\ButtonSelect+\ButtonLeft} |
| \opt{PBELL_VIBE500_PAD}{\ButtonOK+\ButtonRight} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRec+\ButtonFF} |
| keys, respectively.% |
| }% |
| \opt{HAVEREMOTEKEYMAP}{ |
| Remote % |
| \opt{GIGABEAT_RC_PAD}{\ButtonRCDsp / Long \ButtonRCDsp}% |
| \opt{MROBE100_RC_PAD}{\ButtonRCMode / Long \ButtonRCMode} |
| can also be used to switch modes.% |
| }% |
| \newline\newline |
| The following modes are available: |
| \begin{description} |
| |
| \item [Multimedia.] This mode lets you control the volume, playback, |
| and skips tracks on the host computer. It is equivalent for the |
| multimedia keys found on top of some multimedia keyboards. |
| |
| \begin{btnmap} |
| % Volume up / down |
| \opt{SANSA_E200_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD} |
| {\ButtonScrollFwd{} / \ButtonScrollBack} |
| \opt{SANSA_FUZEPLUS_PAD}{\ButtonUp{} / \ButtonDown;} |
| \opt{GIGABEAT_S_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,SANSA_FUZEPLUS_PAD} |
| {\ButtonVolUp{} / \ButtonVolDown} |
| \opt{IRIVER_H10_PAD}{\ButtonScrollUp{} / \ButtonScrollDown} |
| \opt{MROBE100_PAD,PBELL_VIBE500_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD% |
| }{\ButtonUp{} / \ButtonDown} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD} |
| {\ButtonRCVolUp{} / \ButtonRCVolDown}% |
| &} |
| Volume up / down, respectively |
| \\ |
| |
| % Volume mute |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,IPOD_4G_PAD% |
| ,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD}{\ButtonSelect} |
| \opt{GIGABEAT_S_PAD,SANSA_FUZEPLUS_PAD}{\ButtonSelect; \ButtonBack} |
| \opt{IRIVER_H10_PAD}{\ButtonFF} |
| \opt{IRIVER_VIBE500_PAD}{\ButtonMenu} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRight} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD}{Long \ButtonRCFF}% |
| \opt{MROBE100_RC_PAD}{\ButtonRCHeart}% |
| &} |
| Volume mute |
| \\ |
| |
| % Playback play / pause |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD}{\ButtonUp} |
| \opt{IRIVER_H10_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD% |
| ,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD% |
| ,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonPlay} |
| \opt{GIGABEAT_S_PAD}{\ButtonPlay; \ButtonUp} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD}{\ButtonRCPlay}% |
| \opt{MROBE100_RC_PAD}{\ButtonRCPlay}% |
| &} |
| Play / Pause |
| \\ |
| |
| % Playback stop |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD}{\ButtonPower} |
| \opt{GIGABEAT_S_PAD}{\ButtonMenu; \ButtonDown} |
| \opt{SANSA_CLIP_PAD}{\ButtonHome} |
| \opt{IRIVER_H10_PAD}{\ButtonRew; Long \ButtonPlay} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD} |
| {\ButtonMenu; Long \ButtonPlay} |
| \opt{SANSA_FUZEPLUS_PAD}{Long \ButtonPlay} |
| \opt{PBELL_VIBE500_PAD}{\ButtonCancel; Long \ButtonPlay} |
| \opt{MROBE100_PAD}{\ButtonDisplay; Long {\ButtonPlay}} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonLeft} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD}{Long \ButtonRCPlay}% |
| \opt{MROBE100_RC_PAD}{\ButtonRCDisplay; Long \ButtonRCPlay}% |
| &} |
| Stop |
| \\ |
| |
| % Scan previous track |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,% |
| IRIVER_H10_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD% |
| ,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD} |
| {\ButtonLeft} |
| \opt{GIGABEAT_RC_PAD}{\ButtonPrev; \ButtonLeft}% |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRew} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD}{\ButtonRCRew}% |
| &} |
| Scan previous track |
| \\ |
| |
| % Scan next track |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD% |
| ,IRIVER_H10_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD% |
| ,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD} |
| {\ButtonRight} |
| \opt{GIGABEAT_RC_PAD}{\ButtonNext; \ButtonRight}% |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonFF} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD}{\ButtonRCFF}% |
| &} |
| Scan next track |
| \\ |
| \end{btnmap} |
| |
| \item [Presentation.] This mode lets you control a presentation program |
| (e.g. OpenOffice Impress, and some other popular application), making |
| the \dap{} a wired remote control device. This mode is can be useful |
| for lecturers who does not have a wireless remote control for this |
| purpose. |
| |
| \begin{btnmap} |
| % Slideshow start |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD}{\ButtonUp} |
| \opt{GIGABEAT_S_PAD}{\ButtonPlay; \ButtonUp} |
| \opt{IRIVER_H10_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD% |
| ,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD% |
| ,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonPlay} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD}{\ButtonRCPlay}% |
| &} |
| Slideshow start |
| \\ |
| |
| % Slideshow leave |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD}{\ButtonPower} |
| \opt{GIGABEAT_S_PAD}{Long \ButtonPlay; Long \ButtonUp} |
| \opt{SANSA_CLIP_PAD}{\ButtonHome} |
| \opt{IRIVER_H10_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD}{Long \ButtonPlay} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD}{Long \ButtonPlay} |
| \opt{MROBE100_PAD}{\ButtonDisplay; Long \ButtonPlay} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRec} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD}{Long \ButtonRCPlay}% |
| &} |
| Slideshow leave |
| \\ |
| |
| % Slide previous |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,IPOD_4G_PAD% |
| ,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD} |
| {\ButtonLeft} |
| \opt{GIGABEAT_S_PAD}{\ButtonPrev; \ButtonLeft} |
| \opt{IRIVER_H10_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRew} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD}{\ButtonRCRew}% |
| &} |
| Slide previous |
| \\ |
| |
| % Slide next |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,IPOD_4G_PAD% |
| ,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD} |
| {\ButtonRight} |
| \opt{GIGABEAT_S_PAD}{\ButtonNext; \ButtonRight} |
| \opt{IRIVER_H10_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonFF} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD}{\ButtonRCFF}% |
| &} |
| Slide next |
| \\ |
| |
| % Slide first |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,IPOD_4G_PAD% |
| ,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD} |
| {Long \ButtonLeft} |
| \opt{GIGABEAT_S_PAD}{Long \ButtonPrev; Long \ButtonLeft} |
| \opt{IRIVER_H10_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{Long \ButtonRew} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{MROBE100_RC_PAD}{Long \ButtonRCRew}% |
| &} |
| Slide first |
| \\ |
| |
| % Slide last |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,IPOD_4G_PAD% |
| ,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD} |
| {Long \ButtonRight} |
| \opt{GIGABEAT_S_PAD}{Long \ButtonNext; Long \ButtonRight} |
| \opt{IRIVER_H10_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{Long \ButtonFF} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{MROBE100_RC_PAD}{Long \ButtonRCFF}% |
| &} |
| Slide last |
| \\ |
| |
| % Screen black |
| \opt{SANSA_FUZEPLUS_PAD}{\ButtonBottomRight} |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,GIGABEAT_S_PAD,SANSA_C200_PAD% |
| ,SANSA_CLIP_PAD}{\ButtonDown} |
| \opt{IRIVER_H10_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonLeft} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD} |
| {\ButtonMenu} |
| \opt{PBELL_VIBE500_PAD}{\ButtonCancel} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{MROBE100_RC_PAD}{\ButtonRCDisplay}% |
| &} |
| Black screen |
| \\ |
| |
| % Screen white |
| \opt{SANSA_FUZEPLUS_PAD}{Long \ButtonBottomRight} |
| \opt{SANSA_E200_PAD,GIGABEAT_S_PAD,SANSA_C200_PAD% |
| ,SANSA_CLIP_PAD}{Long \ButtonDown} |
| \opt{IRIVER_H10_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{Long \ButtonLeft} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD} |
| {Long \ButtonMenu} |
| \opt{PBELL_VIBE500_PAD}{\ButtonMenu} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{MROBE100_RC_PAD}{Long \ButtonRCDisplay}% |
| &} |
| White screen |
| \\ |
| |
| % Link previous / next |
| \opt{SANSA_E200_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD} |
| {\ButtonScrollBack / \ButtonScrollFwd} |
| \opt{GIGABEAT_S_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD} |
| {\ButtonVolUp / \ButtonVolDown} |
| \opt{IRIVER_H10_PAD}{\ButtonScrollUp / \ButtonScrollDown} |
| \opt{MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD,SAMSUNG_YH92X_PAD% |
| ,SAMSUNG_YH820_PAD} |
| {\ButtonUp / \ButtonDown} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD} |
| {\ButtonRCVolUp / \ButtonRCVolDown}% |
| &} |
| Previous / next link in slide, respectively |
| \\ |
| |
| % Mouse click |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,IPOD_4G_PAD% |
| ,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD,SANSA_FUZEPLUS_PAD} |
| {\ButtonSelect} |
| \opt{GIGABEAT_S_PAD}{\ButtonSelect; \ButtonBack} |
| \opt{IRIVER_H10_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRight} |
| \opt{PBELL_VIBE500_PAD}{\ButtonOK} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD}{Long \ButtonRCFF}% |
| \opt{MROBE100_RC_PAD}{\ButtonRCHeart}% |
| &} |
| Perform a `mouse click' over a link |
| \\ |
| |
| % Mouse over |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,IPOD_4G_PAD% |
| ,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD,SANSA_FUZEPLUS_PAD}{Long \ButtonSelect} |
| \opt{GIGABEAT_S_PAD}{Long \ButtonSelect; Long \ButtonBack} |
| \opt{IRIVER_H10_PAD,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{Long \ButtonRight} |
| \opt{PBELL_VIBE500_PAD}{Long \ButtonOK} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD}{Long \ButtonRCRew}% |
| \opt{MROBE100_RC_PAD}{Long \ButtonRCHeart}% |
| &} |
| Perform a `mouse over' over a link |
| \\ |
| \end{btnmap} |
| |
| \item [Browser.] This mode lets you control a web browser (e.g. |
| Firefox). It uses the \dap{}'s keys to navigate through the web page |
| and different tabs, navigate through history, and to control zoom. |
| |
| \begin{btnmap} |
| % Scroll up / down |
| \opt{SANSA_E200_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD} |
| {\ButtonScrollBack / \ButtonScrollFwd} |
| \opt{SANSA_C200_PAD,SANSA_CLIP_PAD} |
| {\ButtonVolUp / \ButtonVolDown} |
| \opt{GIGABEAT_S_PAD} |
| {\ButtonPrev; \ButtonVolUp / \ButtonNext; \ButtonVolDown} |
| \opt{IRIVER_H10_PAD}{\ButtonScrollUp / \ButtonScrollDown} |
| \opt{MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD,SAMSUNG_YH92X_PAD% |
| ,SAMSUNG_YH820_PAD} |
| {\ButtonUp / \ButtonDown} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD} |
| {\ButtonRCVolUp / \ButtonRCVolDown}% |
| &} |
| Scroll up / down, respectively |
| \\ |
| |
| % Scroll page up / page down |
| \nopt{SANSA_FUZEPLUS_PAD}{ |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD} |
| {\ButtonUp / \ButtonDown} |
| \opt{GIGABEAT_S_PAD}{\ButtonUp / \ButtonDown} |
| \opt{IRIVER_H10_PAD}{\ButtonRew / \ButtonFF} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD} |
| {\ButtonPlay / \ButtonMenu} |
| \opt{PBELL_VIBE500_PAD}{\ButtonOK / \ButtonCancel} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonLeft / \ButtonRight} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{MROBE100_RC_PAD}{\ButtonRCPlay / \ButtonRCDisplay}% |
| &} |
| Scroll page up / page down, respectively |
| \\ |
| } |
| |
| % Zoom in / out |
| \opt{SANSA_FUZEPLUS_PAD}{Long \ButtonBottomRight} |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD} |
| {Long \ButtonUp / Long \ButtonDown} |
| \opt{GIGABEAT_S_PAD}{Long \ButtonUp / Long \ButtonDown} |
| \opt{IRIVER_H10_PAD}{Long \ButtonRew / Long \ButtonFF} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD,MROBE100_PAD} |
| {Long \ButtonPlay / Long \ButtonMenu} |
| \opt{PBELL_VIBE500_PAD}{\ButtonPlay / \ButtonMenu} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{Long \ButtonLeft / Long \ButtonRight} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD}{Long \ButtonRCFF / Long \ButtonRCRew}% |
| \opt{MROBE100_RC_PAD} |
| {Long \ButtonRCPlay / Long \ButtonRCDisplay}% |
| &} |
| Zoom in / out, respectively |
| \\ |
| |
| % Zoom reset |
| \opt{SANSA_E200_PAD} |
| {Long \ButtonSelect; Long \ButtonUp+\ButtonDown} |
| \opt{MROBE100_PAD} |
| {Long \ButtonSelect; Long \ButtonPlay+\ButtonMenu} |
| \opt{SANSA_CLIP_PAD,SANSA_C200_PAD} |
| {Long \ButtonSelect; Long \ButtonUp+\ButtonDown} |
| \opt{GIGABEAT_S_PAD} |
| {Long \ButtonSelect; Long \ButtonUp+\ButtonDown} |
| \opt{IRIVER_H10_PAD}{Long \ButtonRew+\ButtonFF} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD} |
| {Long \ButtonPlay+\ButtonMenu} |
| \opt{PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD}{Long \ButtonPlay} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{Long \ButtonLeft+\ButtonDown} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD}{Long \ButtonRCFF+\ButtonRCRew}% |
| \opt{MROBE100_RC_PAD}{Long \ButtonRCHeart}% |
| &} |
| Zoom reset |
| \\ |
| |
| % Tab previous / next |
| \opt{SANSA_E200_PAD,GIGABEAT_S_PAD,SANSA_C200_PAD% |
| ,SANSA_CLIP_PAD,IRIVER_H10_PAD,IPOD_4G_PAD,IPOD_3G_PAD% |
| ,IPOD_1G2G_PAD,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD} |
| {\ButtonLeft / \ButtonRight} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRew / \ButtonFF} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD,MROBE100_RC_PAD} |
| {\ButtonRCRew / \ButtonRCFF}% |
| &} |
| Tab previous / next, respectively |
| \\ |
| |
| % Tab close |
| \opt{SANSA_FUZEPLUS_PAD}{\ButtonBack} |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD}{Long \ButtonPower} |
| \opt{GIGABEAT_S_PAD}{Long \ButtonPlay; Long \ButtonBack} |
| \opt{SANSA_CLIP_PAD}{Long \ButtonHome} |
| \opt{IRIVER_H10_PAD}{Long \ButtonLeft+\ButtonRight} |
| \opt{MROBE100_PAD}{Long \ButtonDisplay} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD} |
| {Long \ButtonSelect+\ButtonMenu} |
| \opt{PBELL_VIBE500_PAD}{Long \ButtonCancel} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonPlay} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD}{Long \ButtonRCPlay}% |
| &} |
| Tab close |
| \\ |
| |
| % History back / forward |
| \opt{SANSA_E200_PAD,GIGABEAT_S_PAD,SANSA_C200_PAD% |
| ,SANSA_CLIP_PAD,IRIVER_H10_PAD,IPOD_4G_PAD,IPOD_3G_PAD% |
| ,IPOD_1G2G_PAD,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD} |
| {Long \ButtonLeft / Long \ButtonRight} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{Long \ButtonRew / Long \ButtonFF} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{MROBE100_RC_PAD}{Long \ButtonRCRew / Long \ButtonRCFF}% |
| &} |
| History back / forward |
| \\ |
| |
| % View full-screen |
| \opt{SANSA_FUZEPLUS_PAD}{Long \ButtonSelect} |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD% |
| ,GIGABEAT_S_PAD,MROBE100_PAD} |
| {\ButtonSelect} |
| \opt{IRIVER_H10_PAD}{\ButtonPlay} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD} |
| {Long \ButtonSelect+\ButtonPlay} |
| \opt{PBELL_VIBE500_PAD}{Long \ButtonRec} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRec} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{GIGABEAT_RC_PAD}{\ButtonRCPlay}% |
| \opt{MROBE100_RC_PAD}{\ButtonRCHeart}% |
| &} |
| View full-screen toggle |
| \\ |
| \end{btnmap} |
| |
| {\opt{usb_hid_mouse}{ |
| \item [Mouse.] This mode emulates a mouse. Features supported: Mouse |
| movement; left and right button clicking; and dragging and dropping. |
| |
| \begin{btnmap} |
| % Cursor move up / down / left / right |
| \opt{SANSA_E200_PAD,GIGABEAT_S_PAD,SANSA_C200_PAD% |
| ,SANSA_CLIP_PAD,MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD% |
| ,SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD} |
| {\ButtonUp / \ButtonDown / \ButtonLeft / \ButtonRight} |
| \opt{IRIVER_H10_PAD}{\ButtonScrollUp / \ButtonScrollDown / |
| \ButtonLeft / \ButtonRight} |
| \opt{IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD} |
| {\ButtonMenu / \ButtonPlay / \ButtonLeft / \ButtonRight} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{MROBE100_RC_PAD}{\ButtonRCPlay / \ButtonRCDisplay / |
| \ButtonRCRew / \ButtonRCFF}% |
| &} |
| Cursor move up / down / left / right, respectively |
| \\ |
| |
| % Mouse button left-click |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD,SANSA_CLIP_PAD,IPOD_4G_PAD% |
| ,IPOD_3G_PAD,IPOD_1G2G_PAD,SANSA_FUZEPLUS_PAD} |
| {\ButtonSelect} |
| \opt{GIGABEAT_S_PAD}{\ButtonSelect; \ButtonBack} |
| \opt{IRIVER_H10_PAD}{\ButtonPlay} |
| \opt{MROBE100_PAD,PBELL_VIBE500_PAD}{\ButtonMenu} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonRew} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{MROBE100_RC_PAD}{\ButtonRCHeart}% |
| &} |
| Left mouse button click |
| \nopt{IRIVER_H10_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD}{ |
| \\ |
| |
| % Mouse button right-click |
| \opt{SANSA_E200_PAD,SANSA_C200_PAD}{\ButtonPower} |
| \opt{GIGABEAT_S_PAD}{\ButtonMenu} |
| \opt{SANSA_CLIP_PAD}{\ButtonHome} |
| \opt{MROBE100_PAD,PBELL_VIBE500_PAD,SANSA_FUZEPLUS_PAD}{\ButtonPlay} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD}{\ButtonFF} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| &} |
| Right mouse button click |
| } |
| \\ |
| |
| % Mouse wheel scroll up / down |
| \opt{SANSA_FUZEPLUS_PAD} |
| {\ButtonBack / \ButtonBottomLeft} |
| \opt{SANSA_E200_PAD,IPOD_4G_PAD,IPOD_3G_PAD,IPOD_1G2G_PAD} |
| {\ButtonScrollBack / \ButtonScrollFwd} |
| \opt{IRIVER_H10_PAD}{\ButtonRew / \ButtonFF} |
| \opt{GIGABEAT_S_PAD} |
| {\ButtonVolUp; \ButtonPrev / \ButtonVolDown; \ButtonNext} |
| \opt{SANSA_C200_PAD,SANSA_CLIP_PAD,MROBE100_PAD} |
| {\ButtonVolUp / \ButtonVolDown} |
| \opt{PBELL_VIBE500_PAD} |
| {\ButtonOK / \ButtonCancel} |
| \opt{SAMSUNG_YH92X_PAD,SAMSUNG_YH820_PAD} |
| {\ButtonRec+\ButtonUp / \ButtonRec+\ButtonDown} |
| & |
| \opt{HAVEREMOTEKEYMAP}{ |
| \opt{MROBE100_RC_PAD}{\ButtonRCVolUp / \ButtonRCVolDown}% |
| &} |
| Mouse wheel scroll up / down, respectively |
| \\ |
| |
| \end{btnmap} |
| }} |
| \end{description} |
| } |
| \opt{multidrive_usb}{ |
| \subsection{USB Hide Internal Drive} |
| If this option is turned \setting{On}, the internal storage drive will not |
| be exposed on the USB Mass Storage Device. This e.g. makes it possible to |
| access the card slot from systems that can not handle USB devices with |
| multiple drives, such as some car audio systems. |
| } |