blob: 63ae764e14a0f9390b86734903550fe8d37f0908 [file] [log] [blame]
Solomon Peachyd4942cc2018-06-29 16:09:28 -04001/*
2 * This config file is for IHIFI 800
3 */
4
5/* For Rolo and boot loader */
Solomon Peachybad461a2019-07-29 16:45:35 -04006#define MODEL_NUMBER 99
Solomon Peachyd4942cc2018-06-29 16:09:28 -04007
8#define MODEL_NAME "IHIFI 800"
9
10/* Define bitmask of input sources - recordable bitmask can be defined
11 explicitly if different */
12/* #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FM) */
13
14/* define the bitmask of hardware sample rates */
15#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_44 | \
16 SAMPR_CAP_32 | SAMPR_CAP_24 | SAMPR_CAP_22 | \
17 SAMPR_CAP_16 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
18
19#define HAVE_ES9018
20#define CODEC_SLAVE
21
22/* define this if you have a bitmap LCD display */
23#define HAVE_LCD_BITMAP
24
25/* define this if you can flip your LCD */
26/* #define HAVE_LCD_FLIP */
27
28/* define this if you have a colour LCD */
29#define HAVE_LCD_COLOR
30
31/* define this if you want album art for this target */
32#define HAVE_ALBUMART
33
34/* define this to enable bitmap scaling */
35#define HAVE_BMP_SCALING
36
37/* define this to enable JPEG decoding */
38#define HAVE_JPEG
39
40/* define this if you can invert the colours on your LCD */
41/* #define HAVE_LCD_INVERT */
42
43/* define this if you have access to the quickscreen */
44#define HAVE_QUICKSCREEN
45
46/* define this if you would like tagcache to build on this target */
47#define HAVE_TAGCACHE
48
49/* define this if you have a flash memory storage */
50#define HAVE_FLASH_STORAGE
51
52#define CONFIG_STORAGE (STORAGE_SD | STORAGE_NAND)
53
54#define CONFIG_NAND NAND_RK27XX
55#define HAVE_SW_TONE_CONTROLS
56
57#define HAVE_HOTSWAP
58
59#define NUM_DRIVES 1
60#define SECTOR_SIZE 512
61
62/* for small(ish) SD cards */
63#define HAVE_FAT16SUPPORT
64
65/* LCD dimensions */
66#define LCD_WIDTH 240
67#define LCD_HEIGHT 320
68/* sqrt(240^2 + 320^2) / 2.4 = 166.7 */
69#define LCD_DPI 167
70#define LCD_DEPTH 16 /* pseudo 262.144 colors */
71#define LCD_PIXELFORMAT RGB565 /* rgb565 */
72
73/* Define this if the LCD can shut down */
74/* #define HAVE_LCD_SHUTDOWN */
75
76/* Define this if your LCD can be enabled/disabled */
77#define HAVE_LCD_ENABLE
78
79/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
80 should be defined as well. */
81#ifndef BOOTLOADER
82/* TODO: #define HAVE_LCD_SLEEP */
83/* TODO: #define HAVE_LCD_SLEEP_SETTING */
84#endif
85
86#define CONFIG_KEYPAD IHIFI_800_PAD
87
88/* define this if the target has volume keys which can be used in the lists */
89#define HAVE_VOLUME_IN_LIST
90
91/* Define this if a programmable hotkey is mapped */
92/* #define HAVE_HOTKEY */
93
94/* Define this if you do software codec */
95#define CONFIG_CODEC SWCODEC
96
97/* define this if you have a real-time clock */
98/* #define CONFIG_RTC RTC_NANO2G */
99
100/* Define if the device can wake from an RTC alarm */
101/* #define HAVE_RTC_ALARM */
102
103/* Define the type of audio codec */
104/*#define HAVE_RK27XX_CODEC */
105
106/* #define HAVE_PCM_DMA_ADDRESS */
107
108/* Define this for LCD backlight available */
109#define HAVE_BACKLIGHT
110#define HAVE_BACKLIGHT_BRIGHTNESS
111#define MIN_BRIGHTNESS_SETTING 0
112#define MAX_BRIGHTNESS_SETTING 31
113#define DEFAULT_BRIGHTNESS_SETTING 31
114#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
115
116/* Define this if you have a software controlled poweroff */
117#define HAVE_SW_POWEROFF
118
119/* The number of bytes reserved for loadable codecs */
120#define CODEC_SIZE 0x100000
121
122/* The number of bytes reserved for loadable plugins */
123#define PLUGIN_BUFFER_SIZE 0x80000
124
125/* TODO: Figure out real values */
126#define BATTERY_CAPACITY_DEFAULT 1400 /* default battery capacity */
127#define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */
128#define BATTERY_CAPACITY_MAX 1400 /* max. capacity selectable */
129#define BATTERY_CAPACITY_INC 10 /* capacity increment */
130#define BATTERY_TYPES_COUNT 1 /* only one type */
131
132#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
133
134/* Hardware controlled charging with monitoring */
135#define CONFIG_CHARGING CHARGING_MONITOR
136
137/* define current usage levels */
138/* TODO: #define CURRENT_NORMAL
139 * TODO: #define CURRENT_BACKLIGHT 23
140 */
141
142/* define this if the unit can be powered or charged via USB */
143#define HAVE_USB_POWER
144
145/* Define this if your LCD can set contrast */
146/* #define HAVE_LCD_CONTRAST */
147
148/* Offset ( in the firmware file's header ) to the file CRC */
149#define FIRMWARE_OFFSET_FILE_CRC 0
150
151/* Offset ( in the firmware file's header ) to the real data */
152#define FIRMWARE_OFFSET_FILE_DATA 8
153
154#define STORAGE_NEEDS_ALIGN
155
156/* Define this if you have adjustable CPU frequency */
157#define HAVE_ADJUSTABLE_CPU_FREQ
158
159/* Virtual LED (icon) */
160#define CONFIG_LED LED_VIRTUAL
161
162/** Non-simulator section **/
163#ifndef SIMULATOR
164
165/* The exact type of CPU */
166#define CONFIG_CPU RK27XX
167
168/* Define this to the CPU frequency */
169#define CPU_FREQ 200000000
170
171/* I2C interface */
172#define CONFIG_I2C I2C_RK27XX
173
174/* define this if the hardware can be powered off while charging */
175/* #define HAVE_POWEROFF_WHILE_CHARGING */
176
177/* Type of LCD */
178#define CONFIG_LCD LCD_IHIFI800
179
180/* USB On-the-go */
181#define CONFIG_USBOTG USBOTG_RK27XX
182
183/* enable these for the experimental usb stack */
184#define HAVE_USBSTACK
185
186#define USB_VENDOR_ID 0x071b
187#define USB_PRODUCT_ID 0x3202
188#define HAVE_BOOTLOADER_USB_MODE
189
190#define RKW_FORMAT
191#define BOOTFILE_EXT "rkw"
192#define BOOTFILE "rockbox." BOOTFILE_EXT
193#define BOOTDIR "/.rockbox"
194
195/* disabled for now */
196#undef HAVE_HOTSWAP
197
198#endif /* SIMULATOR */