- 2acc0ac Updated our source code header to explicitly mention that we are GPL v2 or by Daniel Stenberg · 16 years ago
- b4275d4 Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page. by Mark Arigo · 16 years ago
- ab7975b Sansa C200 bootloader works fine, no need to be verbose anymore by Björn Stenberg · 17 years ago
- c41470d 1st/2nd gen bootloader: * Don't be verbose by default anymore. * Don't enable the backlight, as it looks bad in a bright environment due to backlight inversion, and it needs a lot of power. by Jens Arnold · 17 years ago
- 90eacb2 G1/G2 bootloader working (always in verbose mode for now). Corrected fatal error help text for G1..G3. by Jens Arnold · 17 years ago
- 8a1fd8c Commit FS#6929 - Gigabeat bootloader improvements by Barry Wardell and myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds. by Karl Kurbjun · 17 years ago
- 14ed3ca In preparation for use with sansapatcher, change portalplayer bootloaders to read firmwares in mi4 format. by Barry Wardell · 18 years ago
- 2370998 Disable bootloader messages in the H10 and Sansa bootloaders unless the PLAY (on H10) or RIGHT (on Sansa) button is being held. Messages are still displayed if an error occurs. This has already been implemented for iPod bootloaders, but still needs implementing for the other bootloaders. by Barry Wardell · 18 years ago
- 4d25bff Disable bootloader messages in the ipod bootloader unless the RIGHT button is being held. Messages are still displayed if an error occurs. This needs implementing for the other bootloaders. by Dave Chapman · 18 years ago
- 46597c9 FS#6554 - Move bootloader code into a common file by Linus Nielsen Feltzing · 18 years ago
- 84b509d FS#6554. Move bootloader code into a common file. Only PortalPlayer devices (iPods, H10, Sansa) are affected for the moment. Someone with access to (and no fear of bricking) an X5, H100, H300 and Gigabeat should try to adapt those bootloaders to also use the code in common.c. The (non-working) patch in the tracker would be a good place to start with this. by Barry Wardell · 18 years ago