- 2acc0ac Updated our source code header to explicitly mention that we are GPL v2 or by Daniel Stenberg · 16 years ago
- 8e66491 M3: Make remote LCD hotplug work, and make 'backlight on button hold' use the correct hold switch. * Kill a warning. by Jens Arnold · 17 years ago
- d700970 Cosmetic fixes for the iAudio bootloader: Don't display 'Hold switch on' if the reason for getting there was a spurious ON event. Don't disable the multi-colour LED in the M3 bootloader. by Jens Arnold · 17 years ago
- ed3ff1b Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations. by Jens Arnold · 17 years ago
- c6b6bad iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE(). by Jens Arnold · 17 years ago
- 8a6291d More iAudio M3 work. Target build compiles, but same problem regarding plugins as the simulator. Boots to the menu, but it can't be used yet because only main & remote Play button work. USB works. by Jens Arnold · 17 years ago
- 769fcbd More iAudio M3 work. Bootloader compiles, but doesn't work yet. by Jens Arnold · 17 years ago