Gitiles
Code Review Sign In
gerrit.rockbox.org / rockbox / b99d4d7fa900a4f6cebd5b87420e2831fdb5a4f3 / bootloader / SOURCES
  1. d4942cc Add Xuelin iHIFI 770/770C/800 support by Solomon Peachy · 6 years ago
  2. 0662793 Add cleaned-up xDuoo X3 support by Solomon Peachy · 6 years ago
  3. d556809 Agptek Rocker: Initial commit by Marcin Bukat · 7 years ago
  4. 1d121e8 Initial commit for the Sony NWZ linux port by Amaury Pouly · 8 years ago
  5. 882921e ipod6g: bootloader v1 by Cástor Muñoz · 9 years ago bootloader_ipod6g_v1
  6. 0eae33c Sansa View: replace real bootloader with a simple test code. by Szymon Dziok · 10 years ago
  7. 5b5f075 Introduce IHIFI760/960 targets. by Andrew Ryabinin · 11 years ago
  8. 3a97e12 Introduce HiFi E.T. MA8/MA8C ports. by Andrew Ryabinin · 11 years ago
  9. d602717 Introduce HiFi E.T. MA9C port. by Andrew Ryabinin · 11 years ago
  10. fa4e1ba Introduce HiFi E.T MA9 port. by Andrew Ryabinin · 11 years ago
  11. e8a8a1b Sandisk Sansa Connect port (FS #12363) by Tomasz Moń · 13 years ago
  12. 2164aab Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801. by Andrew Ryabinin · 13 years ago
  13. 32f763c Add HiFiMAN HM-60x target(s). FS#12319 by Andrew Ryabinin with some (small) modification by me. This also splits rk27xx lcd driver into lcdif-rk27xx and lcd controller specific part. Some modifications to the pcm driver have been made to allow using codecs in slave mode (as TDA1543 used in hifiman is slave only i2s codec). by Marcin Bukat · 13 years ago
  14. 2b9e944 Rework c200wipe to use proper partitioning and formatting code, which makes the code size-independent. by Frank Gevaerts · 13 years ago
  15. 82ecc75 imx233/fuze+: make config.h more correct, remove logo from bootloader, update linker file and crt0 to produce a single blob into dram by Amaury Pouly · 13 years ago
  16. 976a169 Rockchip rk27xx port initial commit. This is still work in progress. by Marcin Bukat · 13 years ago
  17. 08fb3f6 Sansa Fuze+: initial commit (bootloader only, LCD basically working) by Amaury Pouly · 13 years ago
  18. 863c03f Gigabeat S: Renovate bootloader a bit to show splash, implement verbose, shutdown on low battery, handle hold-switch-on and wait only so long for USB if a USB charger is inserted at boot instead of being connected to a host. 'Bootloader USB mode' display is just part of normal printf stream now. Move interrupt stacks into .bss area so they aren't loaded (for firmware too). by Michael Sevakis · 14 years ago
  19. 15a0a3c Rename bootloader file for MPIO players as it supports both HD200 and HD300. by Marcin Bukat · 14 years ago
  20. 9a24892 MPIO HD300 - initial commit by Marcin Bukat · 14 years ago
  21. b09d3ae Add MPIO HD200 port - changed files by Marcin Bukat · 14 years ago
  22. 011b0fa Gigabeat S: Fix bootloader red from r25547 commit. by Michael Sevakis · 14 years ago
  23. 492fafe Packard Bell Vibe 500: remove the old bootloader code (actually a lack of code) and make the main-pp.c acting like a true bootloader for the DAP. It's the first step to integrate the DAP with the RBUtil. by Szymon Dziok · 14 years ago
  24. 553626a Add initial Packard Bell Vibe 500 port, by Szymon Dziok by Frank Gevaerts · 15 years ago
  25. 2392bb4 FS#10047 : Clipv2 by Rafaël Carré · 15 years ago
  26. 6908cc5 Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio. by Mark Arigo · 15 years ago
  27. 2d722a1 make tpj1022 bootloader compile again by Robert Kukla · 15 years ago
  28. 41c4970 Initial mini2440 port. by Dominik Wenger · 15 years ago
  29. b04a7a8 Make the Nano2G bootloader actually function as a bootloader. The resulting bootloader-ipodnano2g.ipod file needs to be encrypted on a target using the crypt_firmware plugin to create bootloader-ipodnano2g.ipodx, which can then be written to the firmware partition using the ipodpatcher patch at FS#10609. Dual-booting doesn't work yet - only Rockbox can be run. by Dave Chapman · 15 years ago
  30. 2fb7384 Start of a Rockbox port to the Samsung YP-S3. by Bertrik Sikken · 15 years ago
  31. cf9935d Onda VX747: add dual-boot capability + make it possible to permanently 'stick' Rockbox to your DAP by Maurus Cuelenaere · 15 years ago
  32. 0270e4c Get the Nano2G bootloader running - it now runs and displays a logo on one type of Nano2G LCD. by Dave Chapman · 15 years ago
  33. eea149b FS#10436 - add the Sansa View to the build system. The bootloader builds but doesn't do anything useful yet. by Robert Keevil · 15 years ago
  34. afe43d3 Basic changes to add nano 2g to the build system, based on the Meizu M3 port. The bootloader builds, but does nothing due to lack of any drivers. by Dave Chapman · 15 years ago
  35. 5829420 * Commit a modified FS#10354 (thanks to Davide Quarta) - add support the VX747+ in scramble and configure by Maurus Cuelenaere · 15 years ago
  36. 758bb3b 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. by Mark Arigo · 15 years ago
  37. 8983fcb Initial commit for the "Lyre prototype 1" port by Jorge Pinto from FS#10045. by Daniel Stenberg · 15 years ago
  38. 9da2456 Fix SVN properties by Maurus Cuelenaere · 16 years ago
  39. 40ec543 * Add support for Onda VX747+ (FS#9674 by Olivier Barbut) by Maurus Cuelenaere · 16 years ago
  40. 9f0fbec Show the Rockbox logo in the Telechips bootloader. by Rob Purchase · 16 years ago
  41. 4f81a54 Add c200 erase tools. The resulting .bin files can be run from e200tool by Frank Gevaerts · 16 years ago
  42. 08c41d4 Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. by Dave Chapman · 16 years ago
  43. da8bff1 Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h by Dave Chapman · 16 years ago
  44. 48e45f5 add Meizu M6SP and M3 ports by Marcoen Hirschberg · 16 years ago
  45. e144638 Add Onda VX767 target by Maurus Cuelenaere · 16 years ago
  46. 5420c3f Share bootloader with Creative ZVM 30GB/60GB and Creative ZV by Maurus Cuelenaere · 16 years ago
  47. 944c334 * Commit dual-boot support for Creative ZVx family by Maurus Cuelenaere · 16 years ago
  48. 0709f0a Add preliminary support for the Onda VX747 (MIPS target) by Maurus Cuelenaere · 16 years ago
  49. 7b10ef9 initial Meizu M6SL port (take 2) by Marcoen Hirschberg · 16 years ago
  50. 22e7bf3 My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left. by Mark Arigo · 16 years ago
  51. b4275d4 Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page. by Mark Arigo · 16 years ago
  52. 940091a FS#7977: Bootloader logo for PP-based targets (H10, Sansa, M-Robe 100). by Barry Wardell · 16 years ago
  53. b2ec13d Revert "initial Meizu M6SL port" by Marcoen Hirschberg · 16 years ago
  54. c7e5d78 initial Meizu M6SL port by Marcoen Hirschberg · 16 years ago
  55. 80ded2a Really fix low-bat detection in the iAudio bootloader. * Improve naming of iriver and iaudio bootloader files. by Jens Arnold · 17 years ago
  56. 769fcbd More iAudio M3 work. Bootloader compiles, but doesn't work yet. by Jens Arnold · 17 years ago
  57. 47ea030 Initial Cowon D2 commit: by Rob Purchase · 17 years ago
  58. e66ddd7 Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. by Mark Arigo · 17 years ago
  59. 28f6ae4 Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. by Dave Chapman · 17 years ago
  60. 590501c Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. by Will Robertson · 17 years ago
  61. 7b97fe2 Beginning of an M:Robe 500i port. Currently only in the bootloader stage. Needs another piece of code to start the boot process - will be in the wiki. by Karl Kurbjun · 17 years ago
  62. 9db22ef Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written. by Jonathan Gordon · 17 years ago
  63. dbc6b4e Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work. by Mark Arigo · 17 years ago
  64. b4994a0 Added new iAudio M5 target, including some adjustments to make the bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet). by Jens Arnold · 18 years ago
  65. ff17905 H300 bootloader: (Work in progress) Boot Rockbox on RTC alarm, add charging screen, move to a separate source file, backlight is on during USB mode (again) by Linus Nielsen Feltzing · 18 years ago
  66. ec549ec Put the X5 bootloader in a separate file by Linus Nielsen Feltzing · 18 years ago
  67. 46597c9 FS#6554 - Move bootloader code into a common file by Linus Nielsen Feltzing · 18 years ago
  68. 84b509d FS#6554. Move bootloader code into a common file. Only PortalPlayer devices (iPods, H10, Sansa) are affected for the moment. Someone with access to (and no fear of bricking) an X5, H100, H300 and Gigabeat should try to adapt those bootloaders to also use the code in common.c. The (non-working) patch in the tracker would be a good place to start with this. by Barry Wardell · 18 years ago
  69. 2f16d4f Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works. by Barry Wardell · 18 years ago
  70. 657dcb5 Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target. by Dave Chapman · 18 years ago
  71. 70c8b75 use h10.c for H10 GB as well by Daniel Stenberg · 18 years ago
  72. 0a06824 initial gigabeat bootloader (only test code) by Marcoen Hirschberg · 18 years ago
  73. 8cc73f1 Check for IPOD_ARCH instead of PP5002/PP5020 to decide when to build ipod.c by Dave Chapman · 18 years ago
  74. 0fc30d1 added mostly dummy changes to allow building of a Sansa e200 bootloader by Daniel Stenberg · 18 years ago
  75. fa74356 iPod 3G support in Bootloader from Seven Le Mesle by Dave Chapman · 19 years ago
  76. 38e8fb6 Initial check-in of work-in-progress iPod bootloader. Current targets are iPod Color/Photo and iPod Nano. by Dave Chapman · 19 years ago
  77. d397145 iRiver Boot loader by Linus Nielsen Feltzing · 20 years ago