1. bc963c3 Hopefully mop-up remaining red. by Michael Sevakis · 16 years ago
  2. 9f0fbec Show the Rockbox logo in the Telechips bootloader. by Rob Purchase · 16 years ago
  3. 2f8a008 Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*. by Frank Gevaerts · 16 years ago
  4. 91b9c61 telechips usb: not ready for use but, something is working, needs improvement. by Vitja Makarov · 16 years ago
  5. 85807cd Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs. by Dave Chapman · 16 years ago
  6. d462a64 Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. by Dave Chapman · 16 years ago
  7. f6cde72 Fix a few dead references in the manual and add an 's' where one was missing. by Marc Guay · 16 years ago
  8. 2acc0ac Updated our source code header to explicitly mention that we are GPL v2 or by Daniel Stenberg · 16 years ago
  9. b93667b Add the Sansa c100 as a build target with basic drivers. by Marc Guay · 16 years ago
  10. f204298 Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. by Dave Chapman · 17 years ago
  11. 18b004b Enable 'touchscreen areas' on the D2, based on JdGordon's m:robe code. Disable the bootloader debug screen, as that stuff is all available from the Debug menu now. by Rob Purchase · 17 years ago
  12. f4deea6 D2: Update dual boot to use the hold switch. Update bootloader to show messages until HOLD released, keep holding POWER to show old debug screen (these modes will eventually be removed). by Rob Purchase · 17 years ago
  13. 3b46671 Make the Telechips bootloader slightly less messy, kill some warnings and allow entry to the bootloader debug screen via the D2's hold switch. by Rob Purchase · 17 years ago
  14. 4dc2d8d Enable tick IRQs on TCC780x. The main menu is now working on the D2. by Rob Purchase · 17 years ago
  15. c883611 Cowon D2: Make the bootloader functional (usage instructions to appear on the CowonD2Info wikipage shortly). Also re-enable IRAM by reducing Tremor's ICODE usage. by Rob Purchase · 17 years ago
  16. 562b9de D2: Make lcd_init_device() actually turn on the LCD, in preparation for booting the main image. Previously this required an explicit lcd_enable(true). by Rob Purchase · 17 years ago
  17. 868fcce Shutdown needs about 2 seconds, but it seems to work :) by Christian Gmeiner · 17 years ago
  18. addb522 D2: Further work-in-progress on the NAND driver. by Rob Purchase · 17 years ago
  19. 5991478 Read ID codes & raw page data from D2 NAND flash (work in progress; by Rob Purchase · 17 years ago
  20. 47ea030 Initial Cowon D2 commit: by Rob Purchase · 17 years ago
  21. ef12b3b Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. by Jens Arnold · 17 years ago
  22. a4d48d0 Button driver for Logik DAX, plus some changes to the debug info displayed in the bootloader build. by Dave Chapman · 17 years ago
  23. 28f6ae4 Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. by Dave Chapman · 17 years ago