- 1446b21 Oops - fix red iPod bootloader build by Dave Chapman · 19 years ago
- f9dac40 iPod: Fix the detection of lcd type for the iPod Photo - this should fix problems with that LCD. Affected users also need to install a new bootloader - available from the iPod Installation wiki page. by Dave Chapman · 19 years ago
- 1c69caf Line too wide for nano screen, split it up. by Thom Johansen · 19 years ago
- 3ded3ce Remove logos from bootloader by Dave Chapman · 19 years ago
- 780cfff H300: Removed lcd_enable() and added a delay to let the hard drive settle before entering USB mode by Linus Nielsen Feltzing · 19 years ago
- 54da924 H300: Bootloader USB mode detection on EXTON wakeup by Linus Nielsen Feltzing · 19 years ago
- 1917cd5 H300: bootloader must call lcd_enable() since the backlight thread isn't running by Linus Nielsen Feltzing · 19 years ago
- cb7e695 iPod: Fix the bootloader so it can load and run the original Apple firmware again. The Rockbox firmware was doing too much to the hardware so we remove most of the initialisation. by Dave Chapman · 19 years ago
- 01917ec H300 bootloader USB mode by Linus Nielsen Feltzing · 19 years ago
- b68cb9b H300 bootloader: don't turn on the HD too soon by Linus Nielsen Feltzing · 19 years ago
- 20eed88 iPod: Change bootloader so that Rockbox loads by default. Holding down MENU now boots to the Apple firmware. Check .rockbox/ for a firmware file (to be consistent with the iriver bootloader) and remove the cosmetic sleep. by Dave Chapman · 19 years ago
- bbe919b iriver bootloader: Better handling of the Hold buttons, turn on the remote backlight when booting, look for /.rockbox/rockbox.iriver before trying /rockbox.iriver by Linus Nielsen Feltzing · 19 years ago
- 4d7ef94 iPod: Correct the background colour of the IPL logo by Dave Chapman · 19 years ago
- f5aebf7 Fixes for new 16-bit framebuffer type by Dave Chapman · 19 years ago
- 061f380 Implement (unreliable) button detection using code from ipodlinux bootloader - this needs replacing by a better button driver in firmware/ and triple-boot bootloader functionality. Current button mappings: MENU loads rockbox.ipod and checks the checksum (but doesn't execute it), PLAY will load and execute a Linux kernel (linux.bin). An error in either of those two actions, or no keypress will load the original firmware by Dave Chapman · 19 years ago
- d8c5d1b Ooops. There was an unclosed comment in the source. by Dave Chapman · 19 years ago
- 38e8fb6 Initial check-in of work-in-progress iPod bootloader. Current targets are iPod Color/Photo and iPod Nano. by Dave Chapman · 19 years ago
- dc9e201 Support for a colon-separated path in APPEXTRA by Linus Nielsen Feltzing · 19 years ago
- e244f7f Added a dummy sys_poweroff() in the boot loader by Linus Nielsen Feltzing · 19 years ago
- 1310390 The iriver bootloader now doesn't reboot after USB mode, it just continues booting by Linus Nielsen Feltzing · 19 years ago
- e628b5c iriver bootloader: slightly faster startup, backlight off in usb mode, minor code policing by Linus Nielsen Feltzing · 19 years ago
- aa10422 Fixed RoLo for H100 targets by Linus Nielsen Feltzing · 19 years ago
- a2e8cf7 Automated version string handling in the boot loader by Linus Nielsen Feltzing · 19 years ago
- d2ca7fc Cleaned up the bootloader code a little by Linus Nielsen Feltzing · 19 years ago
- 5d9f67d Added missing dependencies. by Jens Arnold · 19 years ago
- dfa8ecb iriver bootloader: enable backlight at boot, reset uda1380, warning when low battery, let the user try with USB when the ATA init fails by Linus Nielsen Feltzing · 19 years ago
- d1af08f Correct Rec+ON check in the iriver bootloader by Linus Nielsen Feltzing · 19 years ago
- a75f0e5 iriver bootloader: display the model number for which the rockbox.iriver was built, start original firmware with rec+play on the remote, bumped to version 3 by Linus Nielsen Feltzing · 19 years ago
- 62c768c Recovered from my major brain failure and reverted to using the same load address for both H110 and H120/140 by Linus Nielsen Feltzing · 19 years ago
- a39026a Removed the start-original-with-remote bootloader feature by Linus Nielsen Feltzing · 19 years ago
- e82df4e Bootloader adjustments for H110 by Linus Nielsen Feltzing · 19 years ago
- 0f38185 Boot from the correct address by Linus Nielsen Feltzing · 19 years ago
- 794220c iRiver: The hard drive power is now OFF by default by Linus Nielsen Feltzing · 19 years ago
- 8e958b5 Boot loader: correct handling of CPU frequency setting, better button handling, USB mode handling by Linus Nielsen Feltzing · 19 years ago
- 001f52b adjusted to the new build tree by Daniel Stenberg · 19 years ago
- 1c40d3c Ooops. DRAM can't start at 0x30000000 on iRiver by Linus Nielsen Feltzing · 20 years ago
- d4ad14c Correct check for BUTTON_RC_ON, reset cookie when Hold swicth is on by Linus Nielsen Feltzing · 20 years ago
- b8a00d2 iRiver boot: faster startup, don't start with Hold on, always start original when started with the remote, start the original if unable to load rockbox.iriver by Linus Nielsen Feltzing · 20 years ago
- 2a3856f Better feedback when booting by Linus Nielsen Feltzing · 20 years ago
- a0ed607 Cleaned up the hardware init in the boot loader by Linus Nielsen Feltzing · 20 years ago
- f1530d8 Boot loader safety measures by Linus Nielsen Feltzing · 20 years ago
- 86f4955 make sure these files end up in the source tarballs by Daniel Stenberg · 20 years ago
- e2c140e fixed depfile file name by Daniel Stenberg · 20 years ago
- 2a77d3a Cleaning up by Linus Nielsen Feltzing · 20 years ago
- d397145 iRiver Boot loader by Linus Nielsen Feltzing · 20 years ago