- 9ca8bd6 manual: document 3D enhancement by Amaury Pouly · 8 years ago
- a507bb2 YH8xx,YH9xx: Keymap improvement by Sebastian Leonhardt · 9 years ago
- 716fea8 Fix some language in the sound settings manual. by Michael Giacomelli · 10 years ago
- 3ae0f32 three new DSPs by Chiwen Chang · 10 years ago
- e7f113e Manual for the Samsung YH820. by Szymon Dziok · 10 years ago
- a8b5589 Manual for the Samsung YH920/YH925. by Szymon Dziok · 10 years ago
- 7d62f81 Fix one more spot in the manual where the number of bands was not updated. by Michael Giacomelli · 10 years ago
- 8e55bd1 Add Q factor graphic to EQ settins in the manual. by Michael Giacomelli · 10 years ago
- f0bec02 Implement volume limiter feature by PurlingNayuki · 11 years ago
- d0918b9 DSP Compressor: Sidechain, Exponential Atk/Rls by Ryan Billing · 11 years ago
- 15f1057 fix the eq settings in the manual by Jonathan Gordon · 12 years ago
- 6637e24 Update Fuze+ manual (main files) FS#12492 by Jean-Louis Biasini · 13 years ago
- 4bbc9f6 MPIOs: manual work by Marcin Bukat · 13 years ago
- b25cd7d Revert swap channel feature as we're presently in a feature freeze. I'll recommit after the release is branched. by Michael Giacomelli · 13 years ago
- 5c4bd11 Add option to exchange the left and right stereo channels. Patch by Dave Chapman and Martin Sägmüller. Also add manual entry (by Michael Giacomelli). Note that this setting will confuse non-software effect options like channel balance. This should be addressed in a future commit. by Michael Giacomelli · 13 years ago
- ab759da Explain in more detail what the precut option for EQ does, and also mention that it requires EQ to be enabled to use it. by Michael Giacomelli · 13 years ago
- b43b493 Pick up the target rename completion in the manual started in r27823 ... this time taking care of the Iriver targets. This fixes a few issues with wrongly in- or excluded parts (e.g. pacbox missing from the H100 manual, invadrox wrongly included in the small H10 manual as the plugin's main.tex already used the new names without making sure they are there). If possible replace 'target name' \opts with sensible feature \opts. Fix small mistakes and break too long lines discovered along the way. by Marianne Arnold · 14 years ago
- a434a0d MPIO HD200 manual - tex files by Marcin Bukat · 14 years ago
- 72964f2 Manual: Bring the opts in the manual in line with ifdefs in the code by Alexander Levin · 14 years ago
- 88b6bef Manual: make the presence of the timestretch menu description depend on the right condition (pitchscreen instead of just swcodec) by Alexander Levin · 14 years ago
- 029eb88 Manual: add a reference to the chapter with the description of how to use the timestretch feature by Alexander Levin · 14 years ago
- 40ec7b9 Manual: Add button mappings for the equalizer for the clip/clip+. Fixes part of FS#11672 by Alex Parker · 14 years ago
- 011bece Manual: The gigabeat S has hardware tone controls instead of bass/treble settings, so update the manual to reflect this. Also update the sound settings screen shot. by Alex Parker · 14 years ago
- 5b47b89 First step of completing the target rename in the manual. Some target specific options were already renamed in the rest of the source (e.g. see r23883) but not where they are actually set - in the platform files - leading to parts included or excluded incorrectly. The problem exists for more targets, this commit deals with the supported Iaudios first. Rename 'x5' to 'iaudiox5' (do the same for 'm5' and 'm3'), fix small errors or add missing info related to them along the way, use more appropriate options and simplify code a bit where possible. by Marianne Arnold · 14 years ago
- 197b440 Replace the table that was used for the channels settings option with the item list which is used for this kind of settings lists everywhere else in the manual. by Marianne Arnold · 14 years ago
- c3ee226 Rework the button table in the graphical eq section. Clean up the code, correct falso info and add the missing mappings of the: Fuze, H10s, C200, M3 and Iaudio remote pads. by Marianne Arnold · 14 years ago
- f0e1cf0 Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly. by Andree Buschmann · 14 years ago
- 9736580 Get rid of unnecessary 'table' environment and the never used parameters for button maps (FS#11088) by Alexander Levin · 14 years ago
- e8c72b6 Use typographic quotation marks -- correct more places by Alexander Levin · 15 years ago
- ba0f831 Use correct spelling for 'dB'. by Andree Buschmann · 15 years ago
- 0d824d2 Packard Bell Vibe: Manual - change the names of the buttons internally (ButtonPrev -> ButtonLeft, ButtonNext -> ButtonRight), remove unnecessary strings, join the target to the existing mappings, where it's needed. by Szymon Dziok · 15 years ago
- a09152b Packard Bell Vibe 500: Add a part of the manual (no plugin keymaps yet). by Szymon Dziok · 15 years ago
- 1248e9c More work on consistent usage of units in the manual. Use non-breaking spaces if applicable. by Andree Buschmann · 15 years ago
- 53cf63f Consistent use of Hz, kHz, dB, dbFS, ms, s and min. Add spaces between number and unit -- e.g. '5 dB'. by Andree Buschmann · 15 years ago
- d6aaa33 Use consistent wording for line-in and -out. by Andree Buschmann · 15 years ago
- 934e6f0 Commit FS#10082, enlarge volume control range for WM8758. This will enable volume control down to -90 dB for iPod Video targets. by Andree Buschmann · 15 years ago
- 93afea0 Cowon D2 manual: Platform specific information and installation instructions by Tomer Shalev · 15 years ago
- 1925cd1 A few more spelling corrections. by Alex Parker · 15 years ago
- 95e2d72 Compressor: simplify makeup gain setting, expand release range, finally provide documention in the manual! by Jeffrey Goode · 15 years ago
- 8a148d2 Changes to build a Nano2G manual. It is now just missing the ipodnano2g-front.* images by Dave Chapman · 15 years ago
- e04acd8 FS#10654 - Fix descriptions in manual to obey Latex guidelines by Tomer Shalev · 15 years ago
- a0341df Adds manual section for limiter preamp by Jeffrey Goode · 15 years ago
- 5174341 Add gigabeat F/S volume limits to the manual, and a few minor formatting changes. by Alex Parker · 15 years ago
- fb87e89 Introduce a new environment 'rbtabular' to make all the tables look the same. See comments in preable.tex. Next step will be to define btnmap and tagmap via this environment. by Alexander Levin · 15 years ago
- 4acf5d3 Introduce names for header and row color in the tables so that they are the same throughout the manual and can be changed easily by Alexander Levin · 15 years ago
- 268a4ae Add coloured rows to the other tables in the manual (button maps already done). by Alex Parker · 15 years ago
- ccb6990 Add remote keymappings to the Gigabeat F/X and Gigabeat S manuals. by Alex Parker · 15 years ago
- 8d194f0 Add a generic \opt{HAVEREMOTEKEYMAP}{& } to button maps to allow all by Alex Parker · 15 years ago
- 8b8cbf6 More cleanup and rearrangement for three column button tables in the manual. Most importantly: move the recently added IRIVER_RC_H100_PAD opt - including the additional column seperator - below everything that belongs to the first column. This way every column is grouped and it also allows to combine different remote control pads if they use the same button. Use HAVEREMOTEKAYMAP if the line refers to an ActionSomething. While at it, add or change some white space to make the tables more readable (there is still a lot to be desired there...) and remove a few tabs in random_folder_advance_config.tex. Also fix sliding.tex to make it show all buttons in an M5 manual by using the appropriate _PAD opt and not simply 'x5'. Finally, remove the one overlooked reference to the H100 remote pad in split_editor.tex. by Marianne Arnold · 15 years ago
- 41ff287 Add remote keymapping to the manual for the iriver H100. Plugins have not yet been done and currently just have a blank column. Most plugins only quit via the remote anyway at this point. Please notify of any errors/omissions (I'm sure there are some). by Alex Parker · 15 years ago
- fb23807 FS#8894 - Add time stretching feature to all SWCODEC targets - the current algorithm is best for spoken word. by Steve Bavin · 15 years ago
- e3c9d6a Initial work on the Fuze manual by Rafaël Carré · 15 years ago
- 6c00e1c Add plugin keys to the manual for the Gigabeat S, plus a couple of missing ones for the Gigabeat F. Also add missing equalizer keys for the S. Vast majority is from FS#10073 by Teruaki Kawashima. by Alex Parker · 15 years ago
- f498d53 Rename h100 manual name "h1xx" to "h100" to be in line with other players. by Dominik Riebeling · 16 years ago
- d97f32d merge some fixes from the release branch that also apply to trunk by Frank Gevaerts · 16 years ago
- 5d1287c Sound settings chapter: fill out the bass and treble settings range of the Archos players (and escape the line endings to avoid unnecessary spaces). Also use a more suitable option for the masf specific settings - like loudness, MDB etc. - to include this part in the Ondio manuals. by Marianne Arnold · 16 years ago
- 3a74208 General language cleanup and small restrucuring of the source code of misc. parts of the manual. by Thom Johansen · 16 years ago
- 6f2613f Cross-reference to 'volume settings' from 'volume display'. Long-standing manual fixme. by Marc Guay · 16 years ago
- 1213e5b Add proper volume ranges for iAudio M5 and iPod G1/G2. Fix inclusion of the note regarding volumes >0 dB. by Jens Arnold · 16 years ago
- b1e57c8 Add a fixme to targets where the volume range is missing by Martin Arver · 16 years ago
- 12eb058 Make more use of the 'features' system in the manuals (committed in r16304), less stuff to keep in sync manually but keep in mind that changes in config-*.h can now affect the manual by Nils Wallménius · 17 years ago
- c479b99 FS #8340 by David Bishop. Remove contractions from the manual, as this seems to be common practice in this format and makes it easier to read for non-native english speakers. New manual work should try to adhere to this. by Thom Johansen · 17 years ago
- 51f937c Commit FS#8527 by Thomas Martiz, renaming the wheel macros for sansa e200 to be consistent with ipods and the code and some minor fixes/tweaks by Nils Wallménius · 17 years ago
- c8ea4cc Correct some errors, do some nitpicking and rewrite some stuff for the sound settings menu manual section. by Thom Johansen · 17 years ago
- 10d0344 FS #8315 and FS #8316, plus some of my own small changes. Pretty much just minor language rewrites. by Thom Johansen · 17 years ago
- 42995a3 Fill in some volume/bass/treble values for some targets. Shorten the EQ section a bit and stop using a table for describing the bands, since that wastes a ton of space. by Thom Johansen · 17 years ago
- 7da37b8 Update the manual for the iPod Video changes to hardware equalizer. by Dan Everton · 17 years ago
- a819c74 Avoid additional spaces introduced by latex for every 'opt' which made it look weird in every manual pdf except the Player's. by Marianne Arnold · 17 years ago
- 6b704b8 Add info on new bass/treble controls for X5. by Thom Johansen · 18 years ago
- 5fab9fc Fix a small typo, add FIXME's for sansa and h10 and clean some whitespace by Nils Wallménius · 18 years ago
- 5616203 Add some missing things to the X5 manual. Also updated the VU Meter screens. by Tom Ross · 18 years ago
- a25fa2c More sansa button and screenshot additions by Tom Ross (FS#6535) by Dominik Riebeling · 18 years ago
- e2022a2 Removed executable flag by Linus Nielsen Feltzing · 18 years ago
- 7ec3777 Small attempt at documenting the dithering option. by Thom Johansen · 18 years ago
- 5580cde Fix fixme for the H10's in the volume section by Barry Wardell · 18 years ago
- 21692bb Add fixme for the h10's in the volume section by Martin Arver · 18 years ago
- f8e2f3e Fix for more consistent and proper British English. (-ize/-ise etc) by Martin Arver · 18 years ago
- b109969 Clean up, remove tab characters by Martin Arver · 18 years ago
- a7acf13 First draft of a complete description of the Graphical EQ menu. Still needs button mappings for iAudio and possibly H10. Address FS#5540. by Michael DiFebbo · 18 years ago
- a374ca9 Sync WPS context menu section with reality, make some small improvements, use more actions, add fixmes. by Nils Wallménius · 18 years ago
- 89e411b Slightly rewrote volume, channels and crossfeed settings. by Thom Johansen · 18 years ago
- 8570911 various changes/corrections from Andrew Melville (FS#5815). Some code policy as well. by Martin Arver · 18 years ago
- 8b9b8c9 add bass / treble setting information for ipods. by Dominik Riebeling · 18 years ago
- 103ebf7 Converted sound settings chapter to use \settings macro. by Thom Johansen · 19 years ago
- 70295bf Add a caption to the sound setting screen. dos2unix'ed the file as well. by Martin Arver · 19 years ago
- 1903fab Remove old stereo width setting description, and add description of the new stereo width functionality. by Thom Johansen · 19 years ago
- d01d65f Add new crossfeed settings to the manual, and slightly rewrite a part to by Thom Johansen · 19 years ago
- 87d5536 Fix a table, break long lines and add equalizer screenshot for iriver targets. by Dominik Riebeling · 19 years ago
- 2cf5abb another enhancement of \screenshot -- filenames should now not include the display size extension anymore. Old behaviour still supported. Minor code policing. by Dominik Riebeling · 19 years ago
- e5a2b69 Extention of \screenshot to drop a warning if image not found by me. This makes it possible to build the manual with missing image files. Use \screenshot on all remaining places. Add the \genericimg macro to some screenshots (part of FS #4981 by Mark Bright) by Dominik Riebeling · 19 years ago
- c1ecc63 Split 'Configure Rockbox' chapter into separate chapters for Sound Settings and General Settings. Some cosmetic updates. by Michael DiFebbo · 19 years ago
- 815fa11 More updates to Chapter 4 of the manual. by Michael DiFebbo · 19 years ago
- 25f9cec Divide chapter 4 of the manual into several smaller, more manageable files. by Michael DiFebbo · 19 years ago